main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc28019dr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc28019dr-etched.glb Publish 0.1.0 · Ray
ucc28019dr-etched.step ucc28019dr: factory component page (tier=mfr) · Ray
ucc28019dr-hero.glb ucc28019dr: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc28019dr-hero.overlay.json Publish 0.1.0 · Ray
ucc28019dr.glb Publish 0.1.0 · Ray
ucc28019dr.kicad_mod Publish 0.1.0 · Ray
ucc28019dr.kicad_sym Publish 0.1.0 · Ray
ucc28019dr.lbr Publish 0.1.0 · Ray
ucc28019dr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

UCC28019DR

Texas Instruments · AC-DC Controllers & Regulators · SOIC-8

UCC28019DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground reference for the controller.
2 ICOMP output Transconductance current amplifier output for current-loop compensation, and the controller is disabled if ICOMP is below 0.6 V.
3 ISENSE input Inductor current sense input that averages the voltage across the external sense resistor, and a 220-Ω resistor in series with this pin is recommended to limit inrush-surge current.
4 VINS input Input AC voltage sense for brown-out protection, where the controller is enabled above a 1.5 V threshold and disabled if VINS drops below 0.8 V.
5 VCOMP output Voltage-loop transconductance error amplifier output, held at GND until VCC, VINS and VSENSE exceed their thresholds, with an RC compensation network from this pin to GND.
6 VSENSE input Output voltage sense input, where the controller is disabled below the 0.8 V enable threshold and GATE is disabled when VSENSE exceeds 105% of the reference voltage.
7 VCC power_in Device supply input, where UVLO enables the controller above a 10.5 V turn-on threshold and disables it below 9.5 V, with a minimum 0.1 µF ceramic bypass to GND recommended.
8 GATE output Integrated push-pull gate driver for external power MOSFETs with 2.0-A sink and 1.5-A source capability, with output clamped at 12.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Pre-start current IVCC(start) 25 100 200 µA VCC = VCCON, 0.1 V 3
Standby current IVCC(stby) 1 2.1 2.9 mA VSENSE = 0.5 V 3
Operating current IVCC(on_load) 4 7 10 mA VSENSE = 4.5 V, CGATE = 4.7 nF 3
UVLO turn-on threshold VCCON 10 10.5 11 V 3
UVLO turn-off threshold VCCOFF 9 9.5 10 V 3
UVLO hysteresis 0.8 1 1.2 V 3
Switching frequency fSW 61.7 65 68.3 kHz TA = 25°C 3
Switching frequency fSW 59 65 71 kHz -40°C ≤ TA ≤ 125°C 3
Maximum duty cycle DMAX 94 97 99.3 % VSENSE = 4.95 V 3
Minimum off time tOFF(min) 100 250 600 ns VSENSE = 3 V, ICOMP = 1 V 3
ISENSE threshold, soft over current (SOC) VSOC -0.66 -0.73 -0.79 V 3
ISENSE threshold, peak current limit (PCL) VPCL -1 -1.08 -1.15 V 3
VSENSE threshold, open loop protection (OLP) VOLP 0.77 0.82 0.86 V ICOMP = 1 V, ISENSE = 0 V, VCOMP = 1 V 3
VSENSE threshold, output under-voltage detection (UVD) VUVD 4.63 4.75 4.87 V 3
VSENSE threshold, output over-voltage protection (OVP) VOVP 5.12 5.25 5.38 V ISENSE = -0.2 V 3
Input brown-out detection (IBOP) high-to-low threshold VINSBROWNOUT_th 0.76 0.82 0.88 V 3
Input brown-out detection (IBOP) low-to-high threshold VINSENABLE_th 1.4 1.5 1.6 V 3
VINS bias current IVINS_0 -0.1 0 0.1 µA VINS = 0 V 3
Transconductance gain (current amplifier) gmi 0.75 0.95 1.15 mS TA = 25°C 4
ICOMP voltage during OLP 3.7 4 4.3 V VSENSE = 0.5 V 4
Reference voltage VREF 4.9 5 5.1 V -40°C ≤ TA ≤ 125°C 4
Transconductance gain (voltage error amplifier) gmv 31.5 42 52.5 µS 4
Maximum sink current under normal operation 21 30 38 µA VSENSE = 6 V, VCOMP = 4 V 4
Source current under soft start -21 -30 -38 µA VSENSE = 4 V, VCOMP = 0 V 4
Maximum source current under EDR operation -100 -170 -250 µA VSENSE = 4 V, VCOMP = 0 V 4
Maximum source current under EDR operation -60 -100 -140 µA VSENSE = 4 V, VCOMP = 4 V 4
Enhanced dynamic response, VSENSE low threshold, falling 4.63 4.75 4.87 V 4
VCOMP voltage during OLP 0 0.2 0.4 V VSENSE = 0.5 V, IVCOMP = 0.5 mA 4
GATE low voltage, sinking GATE 0.2 0.75 1.2 V VCC = 5 V, GATE = 5 mA 4
GATE low voltage, sinking GATE 0.2 0.9 1.5 V VCC = 5 V, GATE = 20 mA 4
GATE high voltage GATE 11 12.5 14 V VCC = 20 V, CGATE = 4.7 nF 4
GATE high voltage GATE 9.5 10.5 11 V VCC = 11 V, CGATE = 4.7 nF 4
GATE high voltage GATE 8 9 10.2 V VCC = VCCOFF + 0.2 V, CGATE = 4.7 nF 4
Supply voltage VCC (absolute maximum range) VCC -0.3 22 V 2
GATE output voltage (absolute maximum range) GATE -0.3 16 V 2
Input voltage range, VINS, VSENSE, VCOMP, ICOMP -0.3 7 V 2
Input voltage range, ISENSE ISENSE -24 7 V 2
Input current range, VSENSE, ISENSE -1 1 mA 2
Operating junction temperature TJ -55 150 °C 2
Storage temperature -65 150 °C 2
Lead temperature, soldering TSOL 300 °C Soldering, 10 s 2
ESD, Human Body Model (HBM) 2 kV Human Body Model (HBM) 2
ESD, Charged Device Model (CDM) 500 V Charged Device Model (CDM) 2
VCC input voltage from a low-impedance source VCC 21 V From a low-impedance source; minimum printed as VCCOFF(max) + 1 V (expression, not numeric) 2
Operating junction temperature TJ -40 125 °C 2
Operating free-air temperature range TA -40 125 °C Ordering information table 2
Junction-to-ambient thermal resistance, SOIC-8 (D) 160 °C/W Tested per JEDEC EIA/JESD 51-1 2
Power rating, SOIC-8 (D) 0.65 W TA = 25°C 2
Power rating, SOIC-8 (D) 0.25 W TA = 85°C 2

CAD (KiCad official)

  • Symbol: UCC28019DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc28019dr-etched.step / ucc28019dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28019dr.step / ucc28019dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 b692c5a7126e2d18, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF