3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownUCC28019DR
Texas Instruments · AC-DC Controllers & Regulators · SOIC-8
UCC28019DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground reference for the controller. |
| 2 | ICOMP | output | Transconductance current amplifier output for current-loop compensation, and the controller is disabled if ICOMP is below 0.6 V. |
| 3 | ISENSE | input | Inductor current sense input that averages the voltage across the external sense resistor, and a 220-Ω resistor in series with this pin is recommended to limit inrush-surge current. |
| 4 | VINS | input | Input AC voltage sense for brown-out protection, where the controller is enabled above a 1.5 V threshold and disabled if VINS drops below 0.8 V. |
| 5 | VCOMP | output | Voltage-loop transconductance error amplifier output, held at GND until VCC, VINS and VSENSE exceed their thresholds, with an RC compensation network from this pin to GND. |
| 6 | VSENSE | input | Output voltage sense input, where the controller is disabled below the 0.8 V enable threshold and GATE is disabled when VSENSE exceeds 105% of the reference voltage. |
| 7 | VCC | power_in | Device supply input, where UVLO enables the controller above a 10.5 V turn-on threshold and disables it below 9.5 V, with a minimum 0.1 µF ceramic bypass to GND recommended. |
| 8 | GATE | output | Integrated push-pull gate driver for external power MOSFETs with 2.0-A sink and 1.5-A source capability, with output clamped at 12.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pre-start current | IVCC(start) | 25 | 100 | 200 | µA | VCC = VCCON, 0.1 V | 3 |
| Standby current | IVCC(stby) | 1 | 2.1 | 2.9 | mA | VSENSE = 0.5 V | 3 |
| Operating current | IVCC(on_load) | 4 | 7 | 10 | mA | VSENSE = 4.5 V, CGATE = 4.7 nF | 3 |
| UVLO turn-on threshold | VCCON | 10 | 10.5 | 11 | V | 3 | |
| UVLO turn-off threshold | VCCOFF | 9 | 9.5 | 10 | V | 3 | |
| UVLO hysteresis | 0.8 | 1 | 1.2 | V | 3 | ||
| Switching frequency | fSW | 61.7 | 65 | 68.3 | kHz | TA = 25°C | 3 |
| Switching frequency | fSW | 59 | 65 | 71 | kHz | -40°C ≤ TA ≤ 125°C | 3 |
| Maximum duty cycle | DMAX | 94 | 97 | 99.3 | % | VSENSE = 4.95 V | 3 |
| Minimum off time | tOFF(min) | 100 | 250 | 600 | ns | VSENSE = 3 V, ICOMP = 1 V | 3 |
| ISENSE threshold, soft over current (SOC) | VSOC | -0.66 | -0.73 | -0.79 | V | 3 | |
| ISENSE threshold, peak current limit (PCL) | VPCL | -1 | -1.08 | -1.15 | V | 3 | |
| VSENSE threshold, open loop protection (OLP) | VOLP | 0.77 | 0.82 | 0.86 | V | ICOMP = 1 V, ISENSE = 0 V, VCOMP = 1 V | 3 |
| VSENSE threshold, output under-voltage detection (UVD) | VUVD | 4.63 | 4.75 | 4.87 | V | 3 | |
| VSENSE threshold, output over-voltage protection (OVP) | VOVP | 5.12 | 5.25 | 5.38 | V | ISENSE = -0.2 V | 3 |
| Input brown-out detection (IBOP) high-to-low threshold | VINSBROWNOUT_th | 0.76 | 0.82 | 0.88 | V | 3 | |
| Input brown-out detection (IBOP) low-to-high threshold | VINSENABLE_th | 1.4 | 1.5 | 1.6 | V | 3 | |
| VINS bias current | IVINS_0 | -0.1 | 0 | 0.1 | µA | VINS = 0 V | 3 |
| Transconductance gain (current amplifier) | gmi | 0.75 | 0.95 | 1.15 | mS | TA = 25°C | 4 |
| ICOMP voltage during OLP | 3.7 | 4 | 4.3 | V | VSENSE = 0.5 V | 4 | |
| Reference voltage | VREF | 4.9 | 5 | 5.1 | V | -40°C ≤ TA ≤ 125°C | 4 |
| Transconductance gain (voltage error amplifier) | gmv | 31.5 | 42 | 52.5 | µS | 4 | |
| Maximum sink current under normal operation | 21 | 30 | 38 | µA | VSENSE = 6 V, VCOMP = 4 V | 4 | |
| Source current under soft start | -21 | -30 | -38 | µA | VSENSE = 4 V, VCOMP = 0 V | 4 | |
| Maximum source current under EDR operation | -100 | -170 | -250 | µA | VSENSE = 4 V, VCOMP = 0 V | 4 | |
| Maximum source current under EDR operation | -60 | -100 | -140 | µA | VSENSE = 4 V, VCOMP = 4 V | 4 | |
| Enhanced dynamic response, VSENSE low threshold, falling | 4.63 | 4.75 | 4.87 | V | 4 | ||
| VCOMP voltage during OLP | 0 | 0.2 | 0.4 | V | VSENSE = 0.5 V, IVCOMP = 0.5 mA | 4 | |
| GATE low voltage, sinking | GATE | 0.2 | 0.75 | 1.2 | V | VCC = 5 V, GATE = 5 mA | 4 |
| GATE low voltage, sinking | GATE | 0.2 | 0.9 | 1.5 | V | VCC = 5 V, GATE = 20 mA | 4 |
| GATE high voltage | GATE | 11 | 12.5 | 14 | V | VCC = 20 V, CGATE = 4.7 nF | 4 |
| GATE high voltage | GATE | 9.5 | 10.5 | 11 | V | VCC = 11 V, CGATE = 4.7 nF | 4 |
| GATE high voltage | GATE | 8 | 9 | 10.2 | V | VCC = VCCOFF + 0.2 V, CGATE = 4.7 nF | 4 |
| Supply voltage VCC (absolute maximum range) | VCC | -0.3 | 22 | V | 2 | ||
| GATE output voltage (absolute maximum range) | GATE | -0.3 | 16 | V | 2 | ||
| Input voltage range, VINS, VSENSE, VCOMP, ICOMP | -0.3 | 7 | V | 2 | |||
| Input voltage range, ISENSE | ISENSE | -24 | 7 | V | 2 | ||
| Input current range, VSENSE, ISENSE | -1 | 1 | mA | 2 | |||
| Operating junction temperature | TJ | -55 | 150 | °C | 2 | ||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Lead temperature, soldering | TSOL | 300 | °C | Soldering, 10 s | 2 | ||
| ESD, Human Body Model (HBM) | 2 | kV | Human Body Model (HBM) | 2 | |||
| ESD, Charged Device Model (CDM) | 500 | V | Charged Device Model (CDM) | 2 | |||
| VCC input voltage from a low-impedance source | VCC | 21 | V | From a low-impedance source; minimum printed as VCCOFF(max) + 1 V (expression, not numeric) | 2 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 2 | ||
| Operating free-air temperature range | TA | -40 | 125 | °C | Ordering information table | 2 | |
| Junction-to-ambient thermal resistance, SOIC-8 (D) | 160 | °C/W | Tested per JEDEC EIA/JESD 51-1 | 2 | |||
| Power rating, SOIC-8 (D) | 0.65 | W | TA = 25°C | 2 | |||
| Power rating, SOIC-8 (D) | 0.25 | W | TA = 85°C | 2 |
CAD (KiCad official)
- Symbol:
UCC28019DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc28019dr-etched.step/ucc28019dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc28019dr.step/ucc28019dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
b692c5a7126e2d18, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).