main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ucc28019adr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ucc28019adr: viewers · Ray
package.json ucc28019adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ucc28019adr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ucc28019adr · Ray
ucc28019adr-etched.fit.json ucc28019adr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28019adr-etched.glb ucc28019adr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28019adr-etched.step ucc28019adr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ucc28019adr.glb Publish 0.1.0 · Ray
ucc28019adr.kicad_mod Publish 0.1.0 · Ray
ucc28019adr.kicad_sym Publish 0.1.0 · Ray
ucc28019adr.lbr Publish 0.1.0 · Ray
ucc28019adr.step Publish 0.1.0 · Ray

UCC28019ADR

Texas Instruments · AC-DC Controllers And Regulators · SOIC-8-150mil

UCC28019ADR from Texas Instruments, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for device and all signal returns.
2 ICOMP output Current loop compensation amplifier output; requires RC compensation network to ground with 0.6 V minimum disable threshold and 7.5 V absolute maximum rating.
3 ISENSE input Negative inductor current sense input; soft over-current protection triggers at -0.73 V, peak current limit at -1.08 V; internal 1.5 μA pull-up detects open circuit at 0.1 V.
4 VINS input Scaled AC line voltage sense from external resistor divider; input brown-out protection with 0.82 V (low) and 1.5 V (high) thresholds; soft start initiates when VINS exceeds 1.5 V.
5 VCOMP output Voltage loop error amplifier output for external RC compensation; discharged to ground during fault/standby; voltage determines PWM ramp slope and current amplifier gain.
6 VSENSE input Output voltage feedback from external resistor divider to 5 V reference; over-voltage protection at 5.25 V, under-voltage detection at 4.75 V, standby mode below 0.8 V; internal minimum 100 nA pull-down for open-loop protection.
7 VCC power_in External regulated bias supply input; UVLO enables at 10.5 V and disables at 9.5 V; requires minimum 0.1 μF ceramic bypass capacitor to ground for high-frequency filtering.
8 GATE output Integrated push-pull gate driver output for external MOSFET(s); 2.0 A peak sink and 1.5 A peak source capability; internal clamp limits voltage to 12.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8-150mil
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: UCC28019ADR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
  • 3D model files: ucc28019adr-etched.step / ucc28019adr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc28019adr.step / ucc28019adr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 870dd03827f6d414, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF