← Commit history

Initial commit: component/ucc28019adr

Ray ·02e4fbf5d8 ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# UCC28019ADR++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8-150mil++UCC28019ADR from Texas Instruments, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground reference for device and all signal returns. |+| 2 | ICOMP | output | Current loop compensation amplifier output; requires RC compensation network to ground with 0.6 V minimum disable threshold and 7.5 V absolute maximum rating. |+| 3 | ISENSE | input | Negative inductor current sense input; soft over-current protection triggers at -0.73 V, peak current limit at -1.08 V; internal 1.5 μA pull-up detects open circuit at 0.1 V. |+| 4 | VINS | input | Scaled AC line voltage sense from external resistor divider; input brown-out protection with 0.82 V (low) and 1.5 V (high) thresholds; soft start initiates when VINS exceeds 1.5 V. |+| 5 | VCOMP | output | Voltage loop error amplifier output for external RC compensation; discharged to ground during fault/standby; voltage determines PWM ramp slope and current amplifier gain. |+| 6 | VSENSE | input | Output voltage feedback from external resistor divider to 5 V reference; over-voltage protection at 5.25 V, under-voltage detection at 4.75 V, standby mode below 0.8 V; internal minimum 100 nA pull-down for open-loop protection. |+| 7 | VCC | power_in | External regulated bias supply input; UVLO enables at 10.5 V and disables at 9.5 V; requires minimum 0.1 μF ceramic bypass capacitor to ground for high-frequency filtering. |+| 8 | GATE | output | Integrated push-pull gate driver output for external MOSFET(s); 2.0 A peak sink and 1.5 A peak source capability; internal clamp limits voltage to 12.5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8-150mil |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC28019ADR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8-150mil (KiCad packages3D, STEP)+- 3D model files: `ucc28019adr-etched.step` / `ucc28019adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc28019adr.step` / `ucc28019adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ucc28019a.pdf) (52 pp, sha256 `870dd03827f6d414`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc28019adr-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "ucc28019adr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc28019adr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc28019adr.kicad_sym",+    "ucc28019adr.kicad_mod",+    "ucc28019adr.glb",+    "ucc28019adr.step",+    "ucc28019adr.lbr",+    "docs/hero.png",+    "docs/ucc28019adr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC28019ADR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8-150mil",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc28019a.pdf",+    "parts": {+      "symbol": "ucc28019adr.kicad_sym",+      "footprint": "ucc28019adr.kicad_mod",+      "model_3d": "ucc28019adr-etched.glb",+      "model_3d_plain": "ucc28019adr.glb",+      "model_3d_step": "ucc28019adr-etched.step",+      "model_3d_step_plain": "ucc28019adr.step",+      "lbr": "ucc28019adr.lbr"+    },+    "distributor_links": {+      "lcsc": "C35717"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for device and all signal returns."+      },+      {+        "number": "2",+        "name": "ICOMP",+        "type": "output",+        "description": "Current loop compensation amplifier output; requires RC compensation network to ground with 0.6 V minimum disable threshold and 7.5 V absolute maximum rating."+      },+      {+        "number": "3",+        "name": "ISENSE",+        "type": "input",+        "description": "Negative inductor current sense input; soft over-current protection triggers at -0.73 V, peak current limit at -1.08 V; internal 1.5 μA pull-up detects open circuit at 0.1 V."+      },+      {+        "number": "4",+        "name": "VINS",+        "type": "input",+        "description": "Scaled AC line voltage sense from external resistor divider; input brown-out protection with 0.82 V (low) and 1.5 V (high) thresholds; soft start initiates when VINS exceeds 1.5 V."+      },+      {+        "number": "5",+        "name": "VCOMP",+        "type": "output",+        "description": "Voltage loop error amplifier output for external RC compensation; discharged to ground during fault/standby; voltage determines PWM ramp slope and current amplifier gain."+      },+      {+        "number": "6",+        "name": "VSENSE",+        "type": "input",+        "description": "Output voltage feedback from external resistor divider to 5 V reference; over-voltage protection at 5.25 V, under-voltage detection at 4.75 V, standby mode below 0.8 V; internal minimum 100 nA pull-down for open-loop protection."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "External regulated bias supply input; UVLO enables at 10.5 V and disables at 9.5 V; requires minimum 0.1 μF ceramic bypass capacitor to ground for high-frequency filtering."+      },+      {+        "number": "8",+        "name": "GATE",+        "type": "output",+        "description": "Integrated push-pull gate driver output for external MOSFET(s); 2.0 A peak sink and 1.5 A peak source capability; internal clamp limits voltage to 12.5 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 52,+        "cost_usd": 0.4312,+        "at": "2026-09-23T00:18:36"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/ucc28019a.pdf",+        "pages": 52,+        "sha256": "870dd03827f6d414",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file