main
Ray ucc2800qdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) b2c1a16
{
  "slug": "ucc2800qdrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ucc2800qdrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc2800qdrq1.kicad_sym",
    "ucc2800qdrq1.kicad_mod",
    "ucc2800qdrq1.glb",
    "ucc2800qdrq1.step",
    "ucc2800qdrq1.lbr",
    "docs/hero.png",
    "docs/ucc2800qdrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "UCC2800QDRQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2803-q1",
    "parts": {
      "symbol": "ucc2800qdrq1.kicad_sym",
      "footprint": "ucc2800qdrq1.kicad_mod",
      "model_3d": "ucc2800qdrq1-etched.glb",
      "model_3d_plain": "ucc2800qdrq1.glb",
      "model_3d_step": "ucc2800qdrq1-etched.step",
      "model_3d_step_plain": "ucc2800qdrq1.step",
      "lbr": "ucc2800qdrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C702411",
      "digikey": "296-14755-2-ND",
      "mouser": "595-UCC2800QDRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T02:20:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-14755-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC2800QDRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and PWM comparator input; true low output impedance 2MHz operational amplifier capable of sourcing and sinking current with internal current limiting allowing zero duty cycle by external connection to GND."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of error amplifier for feedback voltage regulation; keep lead length as short as possible and minimize stray capacitance for best stability."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense input to PWM and overcurrent comparators with internal 100ns digital leading edge blanking for noise rejection; no external RC filtering required in most applications."
      },
      {
        "number": "4",
        "name": "RC",
        "type": "input",
        "description": "Oscillator timing pin; connect external resistor from REF (10kΩ to 200kΩ recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground and power ground for all device functions; use ground plane and keep separate ground paths for high-current gate driver circuit."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "High-current power driver output with peak current capability exceeding ±750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500µA; requires 0.1µF ceramic capacitor bypassed to GND near pin."
      },
      {
        "number": "8",
        "name": "REF",
        "type": "output",
        "description": "Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5kΩ resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor to GND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 39,
        "cost_usd": 0.2821,
        "at": "2026-10-01T02:19:50"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ucc2803-q1",
        "pages": 47,
        "sha256": "f3617bb600d56d65",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc2800qdrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc2800qdrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c85c5db686db2f4601a5a4a58f262a51f86658c64e6d746fb295e130ad611f26",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}