← Commit history

ucc2800qdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·b2c1a16f43 · ·parent 1140556
2 files changed +88−8
package.json+46−6
@@ -85,7 +85,7 @@         "number": "4",         "name": "RC",         "type": "input",-        "description": "Oscillator timing pin; connect external resistor from REF (10k\u03a9 to 200k\u03a9 recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency."+        "description": "Oscillator timing pin; connect external resistor from REF (10kΩ to 200kΩ recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency."       },       {         "number": "5",@@ -97,19 +97,19 @@         "number": "6",         "name": "OUT",         "type": "output",-        "description": "High-current power driver output with peak current capability exceeding \u00b1750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression."+        "description": "High-current power driver output with peak current capability exceeding ±750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression."       },       {         "number": "7",         "name": "VCC",         "type": "power_in",-        "description": "Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500\u00b5A; requires 0.1\u00b5F ceramic capacitor bypassed to GND near pin."+        "description": "Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500µA; requires 0.1µF ceramic capacitor bypassed to GND near pin."       },       {         "number": "8",         "name": "REF",         "type": "output",-        "description": "Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5k\u03a9 resistor during UVLO; requires 0.1\u00b5F minimum ceramic bypass capacitor to GND."+        "description": "Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5kΩ resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor to GND."       }     ],     "provenance": {@@ -144,6 +144,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ucc2800qdrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ucc2800qdrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c85c5db686db2f4601a5a4a58f262a51f86658c64e6d746fb295e130ad611f26",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -129,7 +129,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ucc2800qdrq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ucc2800qdrq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c85c5db686db2f4601a5a4a58f262a51f86658c64e6d746fb295e130ad611f26",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -176,4 +216,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}