component
UCC2800QDRQ1
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/ucc2800qdrq1
67e3c0f
UCC2800QDRQ1
Texas Instruments · AC-DC Controllers And Regulators · SOIC-8
UCC2800QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input; true low output impedance 2MHz operational amplifier capable of sourcing and sinking current with internal current limiting allowing zero duty cycle by external connection to GND. |
| 2 | FB | input | Inverting input of error amplifier for feedback voltage regulation; keep lead length as short as possible and minimize stray capacitance for best stability. |
| 3 | CS | input | Current sense input to PWM and overcurrent comparators with internal 100ns digital leading edge blanking for noise rejection; no external RC filtering required in most applications. |
| 4 | RC | input | Oscillator timing pin; connect external resistor from REF (10kΩ to 200kΩ recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency. |
| 5 | GND | power_in | Reference ground and power ground for all device functions; use ground plane and keep separate ground paths for high-current gate driver circuit. |
| 6 | OUT | output | High-current power driver output with peak current capability exceeding ±750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression. |
| 7 | VCC | power_in | Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500µA; requires 0.1µF ceramic capacitor bypassed to GND near pin. |
| 8 | REF | output | Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5kΩ resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
UCC2800QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc2800qdrq1-etched.step/ucc2800qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc2800qdrq1.step/ucc2800qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
f3617bb600d56d65, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UCC2800QDRQ1
**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8
UCC2800QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Error amplifier output and PWM comparator input; true low output impedance 2MHz operational amplifier capable of sourcing and sinking current with internal current limiting allowing zero duty cycle by external connection to GND. |
| 2 | FB | input | Inverting input of error amplifier for feedback voltage regulation; keep lead length as short as possible and minimize stray capacitance for best stability. |
| 3 | CS | input | Current sense input to PWM and overcurrent comparators with internal 100ns digital leading edge blanking for noise rejection; no external RC filtering required in most applications. |
| 4 | RC | input | Oscillator timing pin; connect external resistor from REF (10kΩ to 200kΩ recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency. |
| 5 | GND | power_in | Reference ground and power ground for all device functions; use ground plane and keep separate ground paths for high-current gate driver circuit. |
| 6 | OUT | output | High-current power driver output with peak current capability exceeding ±750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression. |
| 7 | VCC | power_in | Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500µA; requires 0.1µF ceramic capacitor bypassed to GND near pin. |
| 8 | REF | output | Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5kΩ resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `UCC2800QDRQ1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ucc2800qdrq1-etched.step` / `ucc2800qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2800qdrq1.step` / `ucc2800qdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc2803-q1) (47 pp, sha256 `f3617bb600d56d65`, retrieved 2026-10-01, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ucc2800qdrq1-datasheet.pdf)