← Commit history

Initial commit: component/ucc2800qdrq1

Ray ·67e3c0f21e ·
2 files changed +200
README.mdadded+45
@@ -0,0 +1,45 @@+# UCC2800QDRQ1++**Texas Instruments** · AC-DC Controllers And Regulators · SOIC-8++UCC2800QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output and PWM comparator input; true low output impedance 2MHz operational amplifier capable of sourcing and sinking current with internal current limiting allowing zero duty cycle by external connection to GND. |+| 2 | FB | input | Inverting input of error amplifier for feedback voltage regulation; keep lead length as short as possible and minimize stray capacitance for best stability. |+| 3 | CS | input | Current sense input to PWM and overcurrent comparators with internal 100ns digital leading edge blanking for noise rejection; no external RC filtering required in most applications. |+| 4 | RC | input | Oscillator timing pin; connect external resistor from REF (10kΩ to 200kΩ recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency. |+| 5 | GND | power_in | Reference ground and power ground for all device functions; use ground plane and keep separate ground paths for high-current gate driver circuit. |+| 6 | OUT | output | High-current power driver output with peak current capability exceeding ±750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression. |+| 7 | VCC | power_in | Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500µA; requires 0.1µF ceramic capacitor bypassed to GND near pin. |+| 8 | REF | output | Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5kΩ resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `UCC2800QDRQ1`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ucc2800qdrq1-etched.step` / `ucc2800qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ucc2800qdrq1.step` / `ucc2800qdrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ucc2803-q1) (47 pp, sha256 `f3617bb600d56d65`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ucc2800qdrq1-datasheet.pdf)
page.jsonadded+155
@@ -0,0 +1,155 @@+{+  "slug": "ucc2800qdrq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ucc2800qdrq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ucc2800qdrq1.kicad_sym",+    "ucc2800qdrq1.kicad_mod",+    "ucc2800qdrq1.glb",+    "ucc2800qdrq1.step",+    "ucc2800qdrq1.lbr",+    "docs/hero.png",+    "docs/ucc2800qdrq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "UCC2800QDRQ1",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ucc2803-q1",+    "parts": {+      "symbol": "ucc2800qdrq1.kicad_sym",+      "footprint": "ucc2800qdrq1.kicad_mod",+      "model_3d": "ucc2800qdrq1-etched.glb",+      "model_3d_plain": "ucc2800qdrq1.glb",+      "model_3d_step": "ucc2800qdrq1-etched.step",+      "model_3d_step_plain": "ucc2800qdrq1.step",+      "lbr": "ucc2800qdrq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C702411",+      "digikey": "296-14755-2-ND",+      "mouser": "595-UCC2800QDRQ1"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T02:20:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-14755-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-UCC2800QDRQ1",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output and PWM comparator input; true low output impedance 2MHz operational amplifier capable of sourcing and sinking current with internal current limiting allowing zero duty cycle by external connection to GND."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Inverting input of error amplifier for feedback voltage regulation; keep lead length as short as possible and minimize stray capacitance for best stability."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Current sense input to PWM and overcurrent comparators with internal 100ns digital leading edge blanking for noise rejection; no external RC filtering required in most applications."+      },+      {+        "number": "4",+        "name": "RC",+        "type": "input",+        "description": "Oscillator timing pin; connect external resistor from REF (10kΩ to 200kΩ recommended) to set timing capacitor charging current and capacitor to GND (100pF to 1000pF recommended) to set switching frequency."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Reference ground and power ground for all device functions; use ground plane and keep separate ground paths for high-current gate driver circuit."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "High-current power driver output with peak current capability exceeding ±750mA for driving MOSFET gates; actively held low when VCC is below UVLO threshold; CMOS output with low impedance for overshoot and undershoot suppression."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input biased through series current-limiting resistor in normal operation; internal clamp to 13.5V; typical quiescent current 500µA; requires 0.1µF ceramic capacitor bypassed to GND near pin."+      },+      {+        "number": "8",+        "name": "REF",+        "type": "output",+        "description": "Reference voltage output (5V for UCC2800-Q1) providing precision voltage reference for error amplifier and internal circuits; pulled to ground through 5kΩ resistor during UVLO; requires 0.1µF minimum ceramic bypass capacitor to GND."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 39,+        "cost_usd": 0.2821,+        "at": "2026-10-01T02:19:50"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ucc2803-q1",+        "pages": 47,+        "sha256": "f3617bb600d56d65",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file