main
Ray Publish 0.1.0 3338cac
{
  "slug": "ucc24636dbvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Monitors & Reset Circuits, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ucc24636dbvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc24636dbvr.kicad_sym",
    "ucc24636dbvr.kicad_mod",
    "ucc24636dbvr.glb",
    "ucc24636dbvr.step",
    "ucc24636dbvr.lbr",
    "docs/hero.png",
    "docs/ucc24636dbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc24636dbvr-hero.glb",
    "ucc24636dbvr-hero.overlay.json",
    "ucc24636dbvr-etched.glb"
  ],
  "component": {
    "mpn": "UCC24636DBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc24636.pdf",
    "parts": {
      "symbol": "ucc24636dbvr.kicad_sym",
      "footprint": "ucc24636dbvr.kicad_mod",
      "model_3d": "ucc24636dbvr-hero.glb",
      "model_3d_plain": "ucc24636dbvr-etched.glb",
      "model_3d_step": "ucc24636dbvr-etched.step",
      "model_3d_step_plain": "ucc24636dbvr.step",
      "lbr": "ucc24636dbvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868874",
      "digikey": "296-50183-2-ND",
      "mouser": "595-UCC24636DBVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T18:39:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-50183-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC24636DBVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VPC",
        "type": "input",
        "description": "Voltage during Primary Conduction pin connects to a resistor divider from the SR MOSFET drain, sampling primary-side volt-seconds during primary on-time to program the internal VPC ramp charging current (operating range -0.3 V to 2.2 V, abs max 4.5 V)."
      },
      {
        "number": "2",
        "name": "VSC",
        "type": "input",
        "description": "Voltage during Secondary Conduction pin connects to a resistor divider from the power-supply output, sampling output voltage to set SR MOSFET conduction time and program the internal VSC ramp charging current (operating range -0.3 V to 2.2 V)."
      },
      {
        "number": "3",
        "name": "TBLK",
        "type": "passive",
        "description": "Time blank pin selects the blanking time of the VPC rising edge, programmable from 200 ns to 2 µs to prevent false detection of primary on-time due to ringing during DCM operation."
      },
      {
        "number": "4",
        "name": "DRV",
        "type": "output",
        "description": "Drive output for the gate of an external N-channel synchronous rectifier MOSFET whose source is connected to GND (continuous source/sink current up to 50 mA)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the controller and low-side return for the drive output, with AC decoupling capacitors returned close to this pin."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply input (3.75 V to 28 V recommended, 30 V absolute max) requiring a bypass capacitor of at least 0.22 µF to GND placed close to the pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: TBLK I/O is shown as '–' in the datasheet pin table; typed passive (resistor programs blanking time); Features list says VDD from 3.6 V while Recommended Operating Conditions give 3.75 V min; the latter"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0764,
        "at": "2026-10-26T18:39:20"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc24636.pdf",
        "pages": 35,
        "sha256": "bb590cfc5e240488",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc24636dbvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc24636dbvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b07ec751c11bc40bbc8fff4e0bab835da204cbd81f9b117e6e6bb4c654c2e7af",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}