Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCC24636DBVR

Texas Instruments · Monitors & Reset Circuits · SOT-23-6

UCC24636DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VPC input Voltage during Primary Conduction pin connects to a resistor divider from the SR MOSFET drain, sampling primary-side volt-seconds during primary on-time to program the internal VPC ramp charging current (operating range -0.3 V to 2.2 V, abs max 4.5 V).
2 VSC input Voltage during Secondary Conduction pin connects to a resistor divider from the power-supply output, sampling output voltage to set SR MOSFET conduction time and program the internal VSC ramp charging current (operating range -0.3 V to 2.2 V).
3 TBLK passive Time blank pin selects the blanking time of the VPC rising edge, programmable from 200 ns to 2 µs to prevent false detection of primary on-time due to ringing during DCM operation.
4 DRV output Drive output for the gate of an external N-channel synchronous rectifier MOSFET whose source is connected to GND (continuous source/sink current up to 50 mA).
5 GND power_in Ground reference for the controller and low-side return for the drive output, with AC decoupling capacitors returned close to this pin.
6 VDD power_in Bias supply input (3.75 V to 28 V recommended, 30 V absolute max) requiring a bypass capacitor of at least 0.22 µF to GND placed close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Bias supply voltage VVDD -0.3 30 V 4
Continuous gate current sink, DRV IDRV 50 mA 4
Continuous gate current source, DRV IDRV -50 mA 4
Peak VPC pin current IVPC -1.2 mA 4
Voltage range, VPC, VSC VVPC, VVSC -0.3 4.5 V 4
Operating junction temperature range TJ -55 150 °C 4
Lead temperature TL 260 °C 0.6 mm from case for 10 seconds 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V per ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V per JEDEC JESD22-C101 4
Bias supply operating voltage VVDD 3.75 28 V 4
VDD bypass capacitor CVDD 0.22 µF 4
Operating junction temperature TJ -40 125 °C 4
VPC, VSC operating range VVPC, VVSC -0.3 2.2 V 4
Junction-to-ambient thermal resistance RθJA 180 °C/W DBV (SOT23) 6 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 71.2 °C/W 4
Junction-to-board thermal resistance RθJB 44 °C/W 4
Junction-to-top characterization parameter ψJT 5.1 °C/W 4
Junction-to-board characterization parameter ψJB 13.8 °C/W 4
Supply current, run IRUN 0.9 1.2 mA IDRV = 0, run state, FSW = 0 kHz 5
Supply current, standby ISTBY 110 160 µA IDRV = 0, standby mode 5
VDD turn-on threshold VVDD(on) 3.9 4 4.3 V VVDD low to high 5
VDD turn-off threshold VVDD(off) 3.3 3.6 3.7 V VVDD high to low 5
DRV low-side drive resistance RDRVLS 1 2 Ω IDRV = 100 mA 5
DRV pull down in start-up VDRVST 0.95 V VDD= 0 to 2 V, IDRV= 10 µA 5
DRV clamp voltage VDRCL 11 13 15 V VVDD = 30 V 5
Disable PMOS high-side drive VPMOS 9.3 10 10.5 V VDD voltage to disable rail-to-rail drive, VDD rising 5
PMOS enable hysteresis VPMOS-HYS 0.75 1 1.25 V VDD voltage hysteresis to enable rail to rail drive, VDD falling 5
DRV pull-up high voltage VDRHI 4.6 4.75 5 V VVDD = 5 V, IDRV = 15 mA 5
VSC SR enable voltage VVSCEN 250 300 340 mV VVSC > VVSCEN, VVSC rising 5
VSC SR enable hysteresis VVSC-HYS 50 mV VVSC falling 5
VSC SR disable voltage VVSCDIS 220 250 280 mV 5
VSC input bias current IVSC -0.25 0 0.4 µA VVSC = 2 V 5
VPC SR enable voltage VVPCEN 345 400 450 mV VVPCEN < VVPC 5
VPC threshold to disable SR VVPCDIS 2.6 2.85 3.1 V VVPC > VVPCDIS 5
Threshold of VVPC rising edge VVPC-TH 0.76 0.808 0.86 V VVPC = 0.95 V, VVPC-TH = 0.85 x VVPC previous cycle 5
Clamp threshold of VVPC rising edge VVPC-TH-CLP 0.9 1 1.1 V VVPC = 2 V 5
VPC input bias current IVPC -0.25 0 0.4 µA VVPC = 2 V 5
RatioVPC_VSC KVPC/KVSC RatioVPC_VSC 3.97 4.17 4.35 VVPC = 1.25 V, tVPC = 1 µs, VVSC = 1.25 V 5
RatioVPC_VSC KVPC/KVSC RatioVPC_VSC 3.95 4.17 4.37 VVPC = 1.25 V, tVPC = 5 µs, VVSC = 1.25 V 5
RatioVPC_VSC KVPC/KVSC RatioVPC_VSC 3.85 4.09 4.26 VVPC = 2 V, tVPC = 1 µs, VVSC = 1.25 V 5
RatioVPC_VSC KVPC/KVSC RatioVPC_VSC 3.85 4.07 4.28 VVPC = 1.25 V, tVPC = 1 µs, VVSC = 0.45 V 5
Thermal shutdown temperature T(STOP) 165 °C Internal junction temperature 6
DRV high-side rise time tR 27 54 ns VVDD = 12 V, CL = 3.3 nF, VDRV = 2 V to 8 V 6
DRV high-side rise time tR 50 100 ns VVDD = 5 V, CL = 3.3 nF, VDRV = 1 V to 4 V 6
DRV low-side fall time tF 20 54 ns VVDD = 12 V, CL = 3.3 nF, VDRV = 8 V to 2 V 6
DRV low-side fall time tF 15 50 ns VVDD = 5 V, CL = 3.3 nF, VDRV = 4 V to 1 V 6
Propagation delay to DRV High tDRVON 80 160 ns VVPC = 1 V to -0.05 V falling to DRV high, VVDD = 12 V, VDRV = 0 V to 2 V 6
Propagation delay to DRV Low tDRVOFF 65 95 ns Test mode 6
VPC sampling time window tVPC-SPL 81 100 125 ns 6
Minimum VPC pulse for SR DRV operation tVPC-BLK 169 203 239 ns RTBLK = 5 kΩ 6
Minimum VPC pulse for SR DRV operation tVPC-BLK 0.85 1.01 1.18 µs RTBLK = 50 kΩ 6
SR minimum on time after VPC falling tSRONMIN 300 350 425 ns 6
SR off blanking time from DRV falling tOFF 3.96 4.35 4.75 us 6
Time to disable SR operation, enter standby tENTO 11.5 12.8 14.1 ms Time to disable DRV 6
Time to enable SR operation, exit standby operation tEN 2.3 2.56 2.82 ms Time to enable DRV 6
Number of switching cycles to enter standby nENTO 64 during tENTO 6
Number of switching cycles to exit standby nEN 32 during tEN 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC and VSC pins. The SR MOSFET turn on is determined when the SR MOSFET body diode starts conducting and the VPC pin voltage falls to near zero; the SR MOSFET turn off is determined by the current emulat 12

CAD (KiCad official)

  • Symbol: UCC24636DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ucc24636dbvr-etched.step / ucc24636dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc24636dbvr.step / ucc24636dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 bb590cfc5e240488, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF