main
Ray Publish 0.1.0 520c4a3
{
  "slug": "ucc12050dve",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ucc12050dve",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc12050dve.kicad_sym",
    "ucc12050dve.kicad_mod",
    "ucc12050dve.glb",
    "ucc12050dve.step",
    "ucc12050dve.lbr",
    "docs/hero.png",
    "docs/ucc12050dve-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc12050dve-hero.glb",
    "ucc12050dve-hero.overlay.json",
    "ucc12050dve-etched.glb"
  ],
  "component": {
    "mpn": "UCC12050DVE",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc12050.pdf",
    "parts": {
      "symbol": "ucc12050dve.kicad_sym",
      "footprint": "ucc12050dve.kicad_mod",
      "model_3d": "ucc12050dve-hero.glb",
      "model_3d_plain": "ucc12050dve-etched.glb",
      "model_3d_step": "ucc12050dve-etched.step",
      "model_3d_step_plain": "ucc12050dve.step",
      "lbr": "ucc12050dve.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868010",
      "digikey": "296-UCC12050DVE-ND",
      "mouser": "595-UCC12050DVE"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T07:45:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-UCC12050DVE-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC12050DVE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: forcing EN low disables the device, and it must be pulled high for normal operation."
      },
      {
        "number": "2",
        "name": "GNDP",
        "type": "power_in",
        "description": "Primary-side power ground return for VINP."
      },
      {
        "number": "3",
        "name": "VINP",
        "type": "power_in",
        "description": "Primary-side input supply, 4.5 V to 5.5 V (5.0 V nominal), requiring a 10-µF ceramic capacitor to GNDP on pin 2 placed close to the device."
      },
      {
        "number": "4",
        "name": "SYNC",
        "type": "input",
        "description": "Synchronous clock input for synchronizing multiple devices; connect to GNDP for standalone operation using the internal oscillator, and keep it separated from switching noise if left open."
      },
      {
        "number": "5",
        "name": "SYNC_OK",
        "type": "output",
        "description": "Active-low, open-drain diagnostic output that is asserted LOW when there is no external SYNC clock or the clock is outside the operating range, and is high-impedance when a clock is applied on SYNC."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Primary-side pin internally connected to the other primary NC pins with no other electrical connection; connect to GNDP on the printed circuit board."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Primary-side pin internally connected to the other primary NC pins with no other electrical connection; connect to GNDP on the printed circuit board."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Primary-side pin internally connected to the other primary NC pins with no other electrical connection; connect to GNDP on the printed circuit board."
      },
      {
        "number": "9",
        "name": "GNDS",
        "type": "power_in",
        "description": "Connect to the GNDS plane on the printed circuit board; do not use as the only ground connection for VISO, and ensure pin 15 is connected to circuit ground."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; pin belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; pin belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; pin belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board."
      },
      {
        "number": "13",
        "name": "SEL",
        "type": "input",
        "description": "VISO setpoint select: 5.0 V when shorted to VISO, 5.4 V through 100 kΩ to VISO, 3.3 V when shorted to GNDS, and 3.7 V through 100 kΩ to GNDS; it is only monitored during the first 1 ms after power-up or EN enable, and leaving it open is unsupported."
      },
      {
        "number": "14",
        "name": "VISO",
        "type": "power_out",
        "description": "Isolated supply output (5.0 V, 5.4 V, 3.3 V or 3.7 V as selected by SEL, up to 500 mW at 25°C), requiring a 10-µF ceramic capacitor to GNDS on pin 15 placed close to the device."
      },
      {
        "number": "15",
        "name": "GNDS",
        "type": "power_in",
        "description": "Secondary-side ground return for VISO; connect the VISO bypass capacitor from VISO to this pin and ensure it is connected to circuit ground."
      },
      {
        "number": "16",
        "name": "GNDS",
        "type": "power_in",
        "description": "Secondary-side ground pin for VISO, connected to the GNDS plane on the printed circuit board."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Pin Functions table text for the GNDS entries is garbled in the extracted text. Pin 9 and pin 16; The NC rows in Table 5-1 are split across lines, so the grouping of NC pins into primary-side (6, 7,; The datasheet labels VISO as a power pin (P) without an explicit ERC class. power_out was chosen bec"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0041,
        "at": "2026-11-12T07:45:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc12050.pdf",
        "pages": 35,
        "sha256": "faf6bfed5030e5ef",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc12050dve.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc12050dve-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1258ea06a44f7793bd2995a44f8f9975bee741106267e09d152ebcaf398b4b38",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DVE0016A",
      "source_page": 32,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ucc12050dve.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}