main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc12050dve: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ucc12050dve-etched.glb Publish 0.1.0 · Ray
ucc12050dve-etched.step ucc12050dve: factory component page (tier=mfr) · Ray
ucc12050dve-hero.glb ucc12050dve: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc12050dve-hero.overlay.json ucc12050dve: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc12050dve.glb Publish 0.1.0 · Ray
ucc12050dve.kicad_mod Publish 0.1.0 · Ray
ucc12050dve.kicad_sym Publish 0.1.0 · Ray
ucc12050dve.lbr Publish 0.1.0 · Ray
ucc12050dve.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

UCC12050DVE

Texas Instruments · DC-DC Converters · SOIC-16-300mil

UCC12050DVE from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin: forcing EN low disables the device, and it must be pulled high for normal operation.
2 GNDP power_in Primary-side power ground return for VINP.
3 VINP power_in Primary-side input supply, 4.5 V to 5.5 V (5.0 V nominal), requiring a 10-µF ceramic capacitor to GNDP on pin 2 placed close to the device.
4 SYNC input Synchronous clock input for synchronizing multiple devices; connect to GNDP for standalone operation using the internal oscillator, and keep it separated from switching noise if left open.
5 SYNC_OK output Active-low, open-drain diagnostic output that is asserted LOW when there is no external SYNC clock or the clock is outside the operating range, and is high-impedance when a clock is applied on SYNC.
6 NC unconnected Primary-side pin internally connected to the other primary NC pins with no other electrical connection; connect to GNDP on the printed circuit board.
7 NC unconnected Primary-side pin internally connected to the other primary NC pins with no other electrical connection; connect to GNDP on the printed circuit board.
8 NC unconnected Primary-side pin internally connected to the other primary NC pins with no other electrical connection; connect to GNDP on the printed circuit board.
9 GNDS power_in Connect to the GNDS plane on the printed circuit board; do not use as the only ground connection for VISO, and ensure pin 15 is connected to circuit ground.
10 NC unconnected No internal connection; pin belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board.
11 NC unconnected No internal connection; pin belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board.
12 NC unconnected No internal connection; pin belongs to the isolated voltage domain and should be connected to GNDS on the printed circuit board.
13 SEL input VISO setpoint select: 5.0 V when shorted to VISO, 5.4 V through 100 kΩ to VISO, 3.3 V when shorted to GNDS, and 3.7 V through 100 kΩ to GNDS; it is only monitored during the first 1 ms after power-up or EN enable, and leaving it open is unsupported.
14 VISO power_out Isolated supply output (5.0 V, 5.4 V, 3.3 V or 3.7 V as selected by SEL, up to 500 mW at 25°C), requiring a 10-µF ceramic capacitor to GNDS on pin 15 placed close to the device.
15 GNDS power_in Secondary-side ground return for VISO; connect the VISO bypass capacitor from VISO to this pin and ensure it is connected to circuit ground.
16 GNDS power_in Secondary-side ground pin for VISO, connected to the GNDS plane on the printed circuit board.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VINP to GNDP -0.3 6 V 4
EN, SYNC, SYNC_OK to GNDP -0.3 V 4
VISO to GNDS -0.3 6 V 4
SEL to GNDS -0.3 V 4
VISO output power at Ta = 25°C POUT_MAX 675 mW Ta = 25°C 4
Operating junction temperature range TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
VINP Primary side supply voltage VINP 4.5 5 5.5 V 4
EN pin input voltage VEN 0 5.5 V 4
SYNC pin input voltage VSYNC 0 5.5 V 4
SYNC_OK pen drain pin voltage VSYNC-OK 0 5.5 V 4
Isolated power supply voltage VISO 0 5.7 V 4
Input voltage (SEL) VSEL 0 5.7 V 4
External DC/DC converter synchronization signal frequency fSYNC 14.4 16 17.6 MHz 4
VISO output power at Ta = 25°C PVISO 500 mW Ta = 25°C 4
Ambient temperature Ta -40 125 °C 4
Junction temperature TJ -40 150 °C 4
VINP quiescent current, disabled IVINQ 100 uA EN=LOW 7
VINP operating current, no load (5.0 V output) IVINO 50 mA EN=HI; SEL shorted to VISO (5.0V output) 7
VINP operating current, no load (5.4 V output) IVINO 45 mA EN=HI; SEL 100kΩ to VISO (5.4V output) 7
VINP operating current, no load (3.3 V output) IVINO 90 mA EN=HI; SEL shorted to GNDS (3.3V output) 7
VINP operating current, no load (3.7 V output) IVINO 80 mA EN=HI; SEL 100kΩ to GNDS (3.7V output) 7
DC current from VINP supply under short circuit IVIN_SC 245 mA VISO short to GNDS 7
Input voltage threshold, logic HIGH VIR 2.2 V Rising edge 7
Input voltage threshold, logic LOW VIF 0.8 V Falling edge 7
Enable pin input current IEN 5 10 uA VEN = 5.0 V 7
SYNC pin input current ISYNC 0.02 1 uA VSYNC = 5.0 V 7
SYNC_OK output low voltage VOL 0.15 V ISYNC_OK = - 2 mA 7
SYNC_OK pin leakage current ILKG_SYNC_OK 1 uA VSYNC_OK = 5.0 V 7
Isolated supply output voltage (5.0 V output) VISO 4.7 5 5.3 V SEL shorted to VISO (5.0V output); IISO = 55 mA 7
Isolated supply output voltage (5.4 V output) VISO 5.1 5.4 5.7 V SEL 100kΩ to VISO (5.4 V output); IISO = 45 mA 7
Isolated supply output voltage (3.3 V output) VISO 3.1 3.3 3.5 V SEL shorted to GNDS (3.3V output); IISO = 100 mA 7
Isolated supply output voltage (3.7 V output) VISO 3.5 3.7 3.9 V SEL 100kΩ to GNDS (3.7 V output); IISO = 90 mA 7
Voltage ripple on isolated supply output (pk-pk), 5.0 V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to VISO (5.0V output); IISO = 100 mA 7
Voltage ripple on isolated supply output (pk-pk), 5.4 V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL 100kΩ to VISO (5.4V output); IISO = 90 mA 7
Voltage ripple on isolated supply output (pk-pk), 3.3 V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to GNDS (3.3V output); IISO = 145 mA 7
Voltage ripple on isolated supply output (pk-pk), 3.7 V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to GNDS (3.7V output); IISO = 130 mA 7
DC/DC converter clock, internal clock mode fSW_INT 7.2 8 8.8 MHz Internal clock mode 8
Static common-mode transient immunity CMTI 100 V/ns Slew Rate of GNDP versus GNDS, VCM = 1000 V 8
VISO rise time, 10% - 90% (5.0 V output) tRISE 750 µs EN = change from LO to HI, SEL shorted to VISO (5.0V output); IISO = 1 mA 8
VISO rise time, 10% - 90% (3.3 V output) tRISE 300 µs EN = change from LO to HI, SEL 100kΩ to GNDS (3.3V output); IISO = 1 mA 8
VINP under-voltage lockout rising threshold VUVPR 4.2 V 7
VINP under-voltage lockout falling threshold VUVPF 3.7 V 7
VINP under-voltage lockout hysteresis VUVPH 0.5 V 7
VISO DC line regulation (5.0 V output) VISO(LINE) 1 % SEL shorted to VISO (5.0 V output); IISO = 50 mA, VINP = 4.5 V to 5.5 V 7
VISO DC line regulation (3.3 V output) VISO(LINE) 1 % SEL shorted to GNDS (3.3 V output); IISO = 75 mA, VINP = 4.5 V to 5.5 V 7
VISO DC load regulation (5.0 V output) VISO(LOAD) 1.5 % SEL shorted to VISO (5.0 V output); IISO = 0 to 100 mA 8
VISO DC load regulation (3.3 V output) VISO(LOAD) 1.5 % SEL shorted to GNDS (3.3 V output); IISO = 0 to 145 mA 8
Efficiency at maximum recommended load (5.0 V output) EFF 60 % SEL shorted to VISO (5.0 V output); IISO = 100 mA 8
Efficiency at maximum recommended load (5.4 V output) EFF 60 % SEL 100kΩ to VISO (5.4V output); IISO = 90 mA 8
Efficiency at maximum recommended load (3.3 V output) EFF 50 % SEL shorted to GNDS (3.3V output); IISO = 145 mA 8
Efficiency at maximum recommended load (3.7 V output) EFF 53 % SEL 100kΩ to GNDS (3.7V output); IISO = 130 mA 8
Thermal shutdown threshold TSDTHR 165 °C Junction Temperature, Rising 8
Thermal shutdown hysteresis TSDHYST 27 °C Junction Temperature, Falling 8
Junction-to-ambient thermal resistance RθJA 63.8 °C/W JESD 51-7, simulated 4-layer JEDEC board 4
Junction-to-case (top) thermal resistance RθJC(top) 21.4 °C/W 4
Junction-to-board thermal resistance RθJB 38.5 °C/W 4
Junction-to-top characterization parameter ψJT 10.2 °C/W 4
Junction-to-board characterization parameter ψJB 37.2 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper respective GND pins. Ensure that enough copper (preferably a connection to the ground plane) is present on 24

CAD (KiCad official)

  • Symbol: UCC12050DVE
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: ucc12050dve-etched.step / ucc12050dve-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc12050dve.step / ucc12050dve.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 faf6bfed5030e5ef, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF