main
Ray Publish 0.1.0 7f599b6
{
  "slug": "ucc12041qdverq1",
  "version": "0.1.0",
  "type": "component",
  "description": "TEXAS INSTRUMENTS Global Sourcing Parts, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "ucc12041qdverq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ucc12041qdverq1.kicad_sym",
    "ucc12041qdverq1.kicad_mod",
    "ucc12041qdverq1.glb",
    "ucc12041qdverq1.step",
    "ucc12041qdverq1.lbr",
    "docs/hero.png",
    "docs/ucc12041qdverq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ucc12041qdverq1-hero.glb",
    "ucc12041qdverq1-hero.overlay.json",
    "ucc12041qdverq1-etched.glb"
  ],
  "component": {
    "mpn": "UCC12041QDVERQ1",
    "manufacturer": "TEXAS INSTRUMENTS",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ucc12041-q1.pdf",
    "parts": {
      "symbol": "ucc12041qdverq1.kicad_sym",
      "footprint": "ucc12041qdverq1.kicad_mod",
      "model_3d": "ucc12041qdverq1-hero.glb",
      "model_3d_plain": "ucc12041qdverq1-etched.glb",
      "model_3d_step": "ucc12041qdverq1-etched.step",
      "model_3d_step_plain": "ucc12041qdverq1.step",
      "lbr": "ucc12041qdverq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C5216533",
      "digikey": "296-UCC12041QDVERQ1TR-ND",
      "mouser": "595-UCC12041QDVERQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T07:44:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-UCC12041QDVERQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-UCC12041QDVERQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: forcing EN low disables the device, and it must be pulled high to enable normal device functionality."
      },
      {
        "number": "2",
        "name": "GNDP",
        "type": "power_in",
        "description": "Power ground return connection for VINP, and the reference for the 10-µF ceramic capacitor on VINP (pin 3)."
      },
      {
        "number": "3",
        "name": "VINP",
        "type": "power_in",
        "description": "Primary-side input supply voltage pin; a 10-µF ceramic capacitor to GNDP (pin 2) placed close to the device pins is required."
      },
      {
        "number": "4",
        "name": "SYNC",
        "type": "input",
        "description": "Synchronous clock input that synchronizes multiple devices, or is connected to GNDP for standalone operation on the internal oscillator; if left open it must be kept separate from switching noise to avoid false clock coupling."
      },
      {
        "number": "5",
        "name": "SYNC_OK",
        "type": "output",
        "description": "Active-low, open-drain diagnostic output that is asserted LOW when there is no external SYNC clock or the clock is outside the operating range, and is high-impedance when a clock is applied on SYNC."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Internally connected to pins 7 and 8 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Internally connected to pins 6 and 8 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Internally connected to pins 6 and 7 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board."
      },
      {
        "number": "9",
        "name": "GNDS",
        "type": "power_in",
        "description": "Connect to the GNDS plane on the printed circuit board; it must not be used as the only ground connection for VISO, and pin 15 must be connected to circuit ground."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board."
      },
      {
        "number": "13",
        "name": "SEL",
        "type": "input",
        "description": "VISO setpoint select: shorted to VISO gives 5.0 V, 5.4 V through a 100-kΩ resistor to VISO, shorted to GNDS gives 3.3 V, and 3.7 V through a 100-kΩ resistor to GNDS; it is sampled during power-up."
      },
      {
        "number": "14",
        "name": "VISO",
        "type": "power_out",
        "description": "Isolated supply voltage output; a 10-µF ceramic capacitor to GNDS (pin 15) placed close to the device pins is required."
      },
      {
        "number": "15",
        "name": "GNDS",
        "type": "power_in",
        "description": "Secondary-side ground return connection for VISO; the VISO bypass capacitor connects from VISO to this pin, and it must be connected to circuit ground."
      },
      {
        "number": "16",
        "name": "GNDS",
        "type": "power_in",
        "description": "Secondary-side ground pin shown as GNDS in the typical application figure; Table 5-1 gives no separate function text for this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 16 is not listed as its own row in Table 5-1 (page 3). Its name GNDS comes from Figure 8-1 (page; The NC rows in Table 5-1 are garbled in the extracted text. Pins 6, 7 and 8 are assigned to the prim; Table 5-1 description for pin 9 is partly garbled, so the wording is a best reading of the text."
        ],
        "pages_sent": 10,
        "cost_usd": 0.0049,
        "at": "2026-11-12T07:44:28"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ucc12041-q1.pdf",
        "pages": 32,
        "sha256": "63c5b55c385c58f5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ucc12041qdverq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ucc12041qdverq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ffbaba62a56f79c826b41c8c609fdd12b0fdfb67ded2fc98fadfe7b31432d74f",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DVE0016A (SO-MOD, DVE)",
      "source_page": 29,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ucc12041qdverq1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}