main
Ray uc3844adtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 9f9e7ea
{
  "slug": "uc3844adtr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "uc3844adtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc3844adtr.kicad_sym",
    "uc3844adtr.kicad_mod",
    "uc3844adtr.glb",
    "uc3844adtr.step",
    "uc3844adtr.lbr",
    "docs/hero.png",
    "docs/uc3844adtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "UC3844ADTR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/uc2845a",
    "parts": {
      "symbol": "uc3844adtr.kicad_sym",
      "footprint": "uc3844adtr.kicad_mod",
      "model_3d": "uc3844adtr-etched.glb",
      "model_3d_plain": "uc3844adtr.glb",
      "model_3d_step": "uc3844adtr-etched.step",
      "model_3d_step_plain": "uc3844adtr.step",
      "lbr": "uc3844adtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C1880378",
      "digikey": "296-UC3844ADTR-ND",
      "mouser": "595-UC3844ADTR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T06:12:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-UC3844ADTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-UC3844ADTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "Low-impedance 1MHz error amplifier output (80dB open-loop gain) serving as peak-current-limit or PWM comparator input; maximum sink current 6mA, internally not current-limited."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier input for power converter voltage feedback control to achieve loop stability."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "5",
        "name": "ISENSE",
        "type": "input",
        "description": "Peak-current-limit or PWM comparator input; when used with current-sense resistor, error amplifier output controls per-cycle peak current limit with maximum signal internally clamped to 1V."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "7",
        "name": "RT/CT",
        "type": "input",
        "description": "Oscillator input programmed with external timing resistor (5kΩ to 100kΩ recommended) and capacitor (470pF to 4.7nF recommended)."
      },
      {
        "number": "8",
        "name": "PGND",
        "type": "power_in",
        "description": "Power and gate-driver return path; enables star-ground technique to redirect gate-driver current away from signal ground, reducing PWM controller instability."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Controller signal ground."
      },
      {
        "number": "10",
        "name": "OUTPUT",
        "type": "output",
        "description": "1A totem-pole gate-driver output capable of sourcing and sinking up to 1A gate current; gate-drive resistor required for current limiting."
      },
      {
        "number": "11",
        "name": "VC",
        "type": "power_in",
        "description": "Gate-driver bias input requiring bias capacitor at least 10x the main switch FET gate capacitance; provides gate-driver biasing in devices without separate VCC pin."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Gate-driver bias input (11V minimum recommended); requires bypass capacitor at least 10x larger than VREF pin capacitor."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "14",
        "name": "VREF",
        "type": "power_out",
        "description": "5V regulated reference output; maximum load current 10mA during normal operation, short-circuit protected at approximately 100mA; requires 1µF high-frequency bypass capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 54,
        "cost_usd": 0.6,
        "at": "2026-09-27T06:12:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/uc2845a",
        "pages": 54,
        "sha256": "7b502cab841be227",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc3844adtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc3844adtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "19b3d71bbfaba9439844eec369a43377b3205295214edb924e0aee5a94777cea",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}