main
Ray uc3843dtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 5fb06a8
{
  "schema_version": 1,
  "type": "component",
  "slug": "uc3843dtr",
  "title": "UC3843DTR",
  "brief": "Texas Instruments AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "uc3843dtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UC3843DTR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/uc3842",
    "parts": {
      "symbol": "uc3843dtr.kicad_sym",
      "footprint": "uc3843dtr.kicad_mod",
      "model_3d": "uc3843dtr-etched.glb",
      "model_3d_plain": "uc3843dtr.glb",
      "model_3d_step": "uc3843dtr-etched.step",
      "model_3d_step_plain": "uc3843dtr.step",
      "lbr": "uc3843dtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C702406"
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "Error-amplifier compensation pin; connect external compensation components here to shape the error-amplifier output, and the amplifier's internal current limit allows COMP to be forced externally to GROUND to command zero duty cycle."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "3",
        "name": "VFB",
        "type": "input",
        "description": "Inverting input of the internal error amplifier, used to close the power-converter voltage-feedback loop for regulation stability; keep lead length and stray capacitance minimal."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "5",
        "name": "ISENSE",
        "type": "input",
        "description": "Primary-side current-sense input connected to the current-sense resistor; the PWM comparator uses this signal to terminate the OUTPUT switch's on-time, and a voltage ramp can be applied here for voltage-mode operation or slope compensation."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "7",
        "name": "RT/CT",
        "type": "bidirectional",
        "description": "Fixed-frequency oscillator timing pin; connect timing resistor RRT from VREF to this pin and timing capacitor CCT from this pin to GROUND to set fOSC = 1.72/(RRT × CCT), with RRT never below 5kΩ."
      },
      {
        "number": "8",
        "name": "PWRGND",
        "type": "power_in",
        "description": "Power ground pin, separate from analog GROUND on this 14-pin package, used as the return for the high-current gate-drive output stage."
      },
      {
        "number": "9",
        "name": "GROUND",
        "type": "power_in",
        "description": "Analog signal/reference ground for the device; TI recommends keeping this signal return separate from the high-current gate-driver ground path."
      },
      {
        "number": "10",
        "name": "OUTPUT",
        "type": "output",
        "description": "High-current bipolar totem-pole gate-drive output for an external N-channel MOSFET, capable of sourcing/sinking peak currents up to 1A and actively held low when VCC is below the UVLO turn-on threshold."
      },
      {
        "number": "11",
        "name": "VC",
        "type": "power_in",
        "description": "Bias-supply input dedicated to the output gate driver stage; requires a bypass capacitor with capacitance at least 10x the main switching FET's gate capacitance."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Analog controller bias-supply input; total VCC current equals the quiescent current plus the average OUTPUT current (IOUTPUT = Qg × fSW), and requires a 0.1µF bypass capacitor to GROUND plus an additional capacitor at least 10x the switching FET gate capacitance."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "14",
        "name": "VREF",
        "type": "power_out",
        "description": "5V internal reference output used to charge the oscillator timing capacitor through the timing resistor and to bias internal circuitry; requires a ceramic bypass capacitor of at least 0.1µF placed as close as possible to the pin, with additional bypass for any external load on VREF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 61,
        "cost_usd": 0.7309,
        "at": "2026-09-24T08:10:59"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/uc3842",
        "pages": 61,
        "sha256": "0f875fd24cbb5fda",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc3843dtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          8.7,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc3843dtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          8.7,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "88753b1258bc3db7ba37afe5269ca4a9f61cab7fcc02ad71d79c4231b0d5f0cc",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-14",
      "Category": "Power Management (PMIC)",
      "Pins": "14"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "uc3843dtr"
  ],
  "discovery_pitch": "UC3843DTR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc3843dtr.kicad_sym",
    "uc3843dtr.kicad_mod",
    "uc3843dtr.glb",
    "uc3843dtr.step",
    "uc3843dtr.lbr",
    "docs/hero.png",
    "docs/uc3843dtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}