component
UC2845ADTR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 20d ago |
| viewers | 20d ago |
| package.json | 20d ago |
| page.json | 20d ago |
| README.md | 20d ago |
| uc2845adtr-etched.glb | 20d ago |
| uc2845adtr-etched.step | 20d ago |
| uc2845adtr-hero.glb | 20d ago |
| uc2845adtr-hero.overlay.json | 20d ago |
| uc2845adtr.glb | 20d ago |
| uc2845adtr.kicad_mod | 20d ago |
| uc2845adtr.kicad_sym | 20d ago |
| uc2845adtr.lbr | 20d ago |
| uc2845adtr.step | 20d ago |
UC2845ADTR
Texas Instruments · AC-DC Controllers And Regulators · SOIC-14
UC2845ADTR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Low-impedance 1 MHz internal error amplifier output that is also the input to the peak current limit/PWM comparator, with open-loop gain (AVOL) of 80 dB; it can sink a maximum of 6 mA and is not internally current limited. |
| 2 | NC | unconnected | No internal connection on the SOIC-14 package. |
| 3 | FB | input | Error amplifier input used to close the power converter voltage feedback loop and tune loop stability. |
| 4 | NC | unconnected | No internal connection on the SOIC-14 package. |
| 5 | ISENSE | input | Input to the peak current limit/PWM comparator; with a current sense resistor it sets the cycle-by-cycle peak current limit, and the maximum peak current sense signal is internally clamped at 1 V. |
| 6 | NC | unconnected | No internal connection on the SOIC-14 package. |
| 7 | RT/CT | input | Internal oscillator timing input programmed with external resistor RT and capacitor CT; TI recommends CT between 470 pF and 4.7 nF and RT between 5 kΩ and 100 kΩ. |
| 8 | PGND | power_in | Power ground and gate driver return path, which can be star-grounded to keep gate driver return current away from the signal ground pin GND and reduce PWM instability. |
| 9 | GND | power_in | Controller signal ground. |
| 10 | OUTPUT | output | 1 A totem-pole gate driver output that can source and sink up to 1 A of gate drive current, and a gate drive resistor must be used to limit that current. |
| 11 | VC | input | Gate driver bias input; the pin must have a bias capacitor at least 10 times the gate capacitance of the main switching FET. |
| 12 | VCC | power_in | Gate driver bias supply input; the pin must have a bias capacitor at least 10 times the gate capacitance of the main switching FET, and the device is specified with VCC of 11 V minimum for operation and a 30 V maximum for low-impedance sources. |
| 13 | NC | unconnected | No internal connection on the SOIC-14 package. |
| 14 | VREF | power_in | PWM controller 5 V reference output that must supply no more than 10 mA in normal operation, is short-circuit protected at about 100 mA, and requires a 1 µF high-frequency bypass capacitor with the VCC capacitor at least 10 times larger than the VREF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Power Management (PMIC) |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
UC2845ADTR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
uc2845adtr-etched.step/uc2845adtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uc2845adtr.step/uc2845adtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
0eebf00e4b265207, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).