UC2843N

{
  "slug": "uc2843n",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments AC-DC Controllers And Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "uc2843n",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc2843n.kicad_sym",
    "uc2843n.kicad_mod",
    "uc2843n.glb",
    "uc2843n.step",
    "uc2843n.lbr",
    "docs/hero.png",
    "docs/uc2843n-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "uc2843n-hero.glb",
    "uc2843n-hero.overlay.json"
  ],
  "component": {
    "mpn": "UC2843N",
    "manufacturer": "Texas Instruments",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/uc3842",
    "parts": {
      "symbol": "uc2843n.kicad_sym",
      "footprint": "uc2843n.kicad_mod",
      "model_3d": "uc2843n-hero.glb",
      "model_3d_plain": "uc2843n.glb",
      "model_3d_step": "uc2843n-etched.step",
      "model_3d_step_plain": "uc2843n.step",
      "lbr": "uc2843n.lbr"
    },
    "distributor_links": {
      "lcsc": "C701458",
      "digikey": "296-11181-5-ND",
      "mouser": "595-UC2843N"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T21:43:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-11181-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-UC2843N",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier compensation pin: external compensation network connects here to shape the open-collector error amplifier output, and forcing COMP to GROUND gives zero duty cycle."
      },
      {
        "number": "2",
        "name": "VFB",
        "type": "input",
        "description": "Inverting input of the internal error amplifier used for the voltage feedback loop, with the non-inverting input trimmed to 2.5 V; keep the VFB trace as short as possible and stray capacitance as low as possible for stability."
      },
      {
        "number": "3",
        "name": "ISENSE",
        "type": "input",
        "description": "Primary-side current-sense input to the PWM comparator that terminates OUTPUT conduction, with a typical 1 V maximum input signal (VISENSE 0.9 V to 1.1 V), and an RC filter may be needed to prevent false triggering from leading-edge noise."
      },
      {
        "number": "4",
        "name": "RT/CT",
        "type": "bidirectional",
        "description": "Oscillator timing pin: a timing resistor RT from VREF and timing capacitor CT to GROUND set fOSC = 1.72/(RT×CT), where RT must never be less than 5 kΩ and the recommended CT range is 1 nF to 100 nF."
      },
      {
        "number": "5",
        "name": "GROUND",
        "type": "power_in",
        "description": "Combined signal and power ground for this 8-pin package (no separate PWRGND); keep the timing capacitor and bypass returns short and direct to this pin and separate the signal return from the high-current gate-drive path."
      },
      {
        "number": "6",
        "name": "OUTPUT",
        "type": "output",
        "description": "Totem-pole gate driver for an external MOSFET that sources and sinks peak current up to 1 A (absolute maximum output drive current ±1 A) and is actively held low while VCC is below the turn-on threshold."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "Controller supply input with a recommended range of 12 V to 28 V and a 30 V absolute maximum from a low-impedance source (internal clamp typically 34 V); bypass directly to GROUND with a 0.1 µF capacitor placed close to the pin."
      },
      {
        "number": "8",
        "name": "VREF",
        "type": "power_in",
        "description": "5 V reference output (±2% tolerance) that powers the oscillator and internal logic; bypass with at least a 0.1 µF ceramic capacitor placed close to the pin, and recommended reference output current is -20 mA maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet table lists VCC as type 'I' (input); it is mapped to power_in because it is the contro; The datasheet table lists RT/CT as type 'I/O'; it is mapped to bidirectional. The datasheet also giv; COMP is listed as type 'O' in the datasheet, but the error amplifier output is open-collector and ca"
        ],
        "pages_sent": 38,
        "cost_usd": 0.2241,
        "at": "2026-10-07T21:43:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/uc3842",
        "pages": 61,
        "sha256": "0f875fd24cbb5fda",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc2843n.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc2843n-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cbc8f3257401baa238fd87355c87a2a261d660661182ce02b646e10d636aebca",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}