main
Ray uc2625dwtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 79bb388
{
  "schema_version": 1,
  "type": "component",
  "slug": "uc2625dwtr",
  "title": "UC2625DWTR",
  "brief": "Texas Instruments Brushless DC (BLDC) Motor Driver, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "motor driver ics",
    "uc2625dwtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "UC2625DWTR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-28-300mil",
    "pin_count": 28,
    "category": "Motor Driver ICs",
    "subcategory": "Brushless DC (BLDC) Motor Driver",
    "datasheet": "https://www.ti.com/cn/lit/gpn/uc2625",
    "parts": {
      "symbol": "uc2625dwtr.kicad_sym",
      "footprint": "uc2625dwtr.kicad_mod",
      "model_3d": "uc2625dwtr-etched.glb",
      "model_3d_plain": "uc2625dwtr.glb",
      "model_3d_step": "uc2625dwtr-etched.step",
      "model_3d_step_plain": "uc2625dwtr.step",
      "lbr": "uc2625dwtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2150731"
    },
    "pins": [
      {
        "number": "1",
        "name": "E/A OUT",
        "type": "output",
        "description": "Error amplifier output; output swing range 0.25 V to 3.50 V; pull-up current -16 to -5 μA; drives PWM comparator and may be tied to E/A IN(−) for closed-loop compensation."
      },
      {
        "number": "2",
        "name": "VREF",
        "type": "power_out",
        "description": "Trimmed 5.0 V reference output (4.7-5.3 V over operating range); maximum advised load 30 mA; short-circuit current 50-150 mA; must be bypassed with at least 0.1 μF to GND."
      },
      {
        "number": "3",
        "name": "ISENSE",
        "type": "output",
        "description": "Current-sense amplifier output; ISENSE = 2.5 V + 2 × |ISENSE1 − ISENSE2|; level shift 2.4-2.65 V; feeds peak-current (0.14-0.26 V) and overcurrent (0.26-0.36 V) comparators."
      },
      {
        "number": "4",
        "name": "ISENSE1",
        "type": "input",
        "description": "Differential current-sense input 1; input range −1 V to +2 V; input bias current -850 to 0 μA to 0 V; offset current ±12 μA max; use matched filter resistors ≤2 kΩ for accuracy."
      },
      {
        "number": "5",
        "name": "ISENSE2",
        "type": "input",
        "description": "Differential current-sense input 2; interchangeable with ISENSE1; input range −1 V to +2 V; input bias current -850 to 0 μA; differential input may be as high as ±0.5 V before saturation."
      },
      {
        "number": "6",
        "name": "DIR",
        "type": "input",
        "description": "Motor direction latch input; threshold 0.8-2.0 V, hysteresis 0.6 V; input current -30 to 30 μA; direction change is inhibited when SPEED-IN exceeds 250 mV to prevent unsafe reversal."
      },
      {
        "number": "7",
        "name": "SPEED-IN",
        "type": "input",
        "description": "Speed-sense input used to gate the direction latch; threshold 220-290 mV (typ 257 mV); input current -30 to 30 μA; typically connected to TACH-OUT through an RC filter."
      },
      {
        "number": "8",
        "name": "H1",
        "type": "input",
        "description": "Hall-effect shaft-position sensor input 1; TTL-compatible low threshold 0.8-1.2 V, high threshold 1.6-2.0 V; pull-down input current -400 to -120 μA over operating range."
      },
      {
        "number": "9",
        "name": "H2",
        "type": "input",
        "description": "Hall-effect shaft-position sensor input 2; TTL-compatible low threshold 0.8-1.2 V, high threshold 1.6-2.0 V; pull-down input current -400 to -120 μA over operating range."
      },
      {
        "number": "10",
        "name": "H3",
        "type": "input",
        "description": "Hall-effect shaft-position sensor input 3; TTL-compatible low threshold 0.8-1.2 V, high threshold 1.6-2.0 V; pull-down input current -400 to -120 μA over operating range."
      },
      {
        "number": "11",
        "name": "PWR VCC",
        "type": "power_in",
        "description": "Power supply pin for the PD totem-pole drivers; carries all current sourced by PDA, PDB, and PDC; may be current-limited with a series resistor when driving Darlington bases."
      },
      {
        "number": "12",
        "name": "PDC",
        "type": "output",
        "description": "Low-side totem-pole driver C; active high turns on a low-side device; Vol 0.36-0.8 V at 50 mA; Voh 1.75-2.2 V below VCC at 50 mA; 10%-90% rise/fall time 50 ns into 1 nF."
      },
      {
        "number": "13",
        "name": "PDB",
        "type": "output",
        "description": "Low-side totem-pole driver B; active high turns on a low-side device; Vol 0.36-0.8 V at 50 mA; Voh 1.75-2.2 V below VCC at 50 mA; 10%-90% rise/fall time 50 ns into 1 nF."
      },
      {
        "number": "14",
        "name": "PDA",
        "type": "output",
        "description": "Low-side totem-pole driver A; active high turns on a low-side device; Vol 0.36-0.8 V at 50 mA; Voh 1.75-2.2 V below VCC at 50 mA; 10%-90% rise/fall time 50 ns into 1 nF."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; all internal thresholds and outputs except the PU and PD supply rails are referred to this pin."
      },
      {
        "number": "16",
        "name": "PUC",
        "type": "output",
        "description": "High-side open-collector driver C; active low commands a high-side device on; rated to 50 V; leakage ≤25 μA at 50 V; Vol 1.0-1.8 V at 50 mA; fall time 50 ns at 50 mA."
      },
      {
        "number": "17",
        "name": "PUB",
        "type": "output",
        "description": "High-side open-collector driver B; active low commands a high-side device on; rated to 50 V; leakage ≤25 μA at 50 V; Vol 1.0-1.8 V at 50 mA; fall time 50 ns at 50 mA."
      },
      {
        "number": "18",
        "name": "PUA",
        "type": "output",
        "description": "High-side open-collector driver A; active low commands a high-side device on; rated to 50 V; leakage ≤25 μA at 50 V; Vol 1.0-1.8 V at 50 mA; fall time 50 ns at 50 mA."
      },
      {
        "number": "19",
        "name": "VCC",
        "type": "power_in",
        "description": "Main logic and control supply; operating range 10 V to 18 V; under-voltage lockout keeps all outputs off below 7.5 V; turn-on threshold 8.65-9.45 V; bypass with 0.1 μF ceramic."
      },
      {
        "number": "20",
        "name": "TACH-OUT",
        "type": "output",
        "description": "Tachometer output; fires a fixed-width 5 V pulse (on-time 170-280 μs) on each H1/H2/H3 transition; high level 4.7-5.3 V into 10 kΩ; low level ≤0.2 V; average voltage is proportional to speed."
      },
      {
        "number": "21",
        "name": "RC-BRAKE",
        "type": "bidirectional",
        "description": "RC brake timing and brake-command pin; external RT (10 kΩ-500 kΩ) and CT (1 nF-100 nF) to GND set discharge window T = 0.67 RTCT; pulling pin below 0.8-1.2 V threshold commands full-brake mode; input current -4.0 to -1.9 mA."
      },
      {
        "number": "22",
        "name": "QUAD SEL",
        "type": "input",
        "description": "Two/four-quadrant chopping selection input; low selects two-quadrant, high selects four-quadrant; threshold 0.8-2.0 V; hysteresis 70 mV; input current -30 to 150 μA."
      },
      {
        "number": "23",
        "name": "OV-COAST",
        "type": "input",
        "description": "Over-voltage shutdown and coast input; inhibit threshold 1.65-1.85 V; restart threshold 1.55-1.75 V; hysteresis 0.05-0.15 V; input current -10 to 0 μA; accepts TTL, 5-V CMOS, or 12-V CMOS."
      },
      {
        "number": "24",
        "name": "SSTART",
        "type": "bidirectional",
        "description": "Soft-start pin; internal transistor discharges an external capacitor fully on undervoltage or overcurrent fault; clamps E/A OUT to SSTART voltage; restart threshold 0.1-0.3 V; discharge current 0.1-3.0 mA."
      },
      {
        "number": "25",
        "name": "RC-OSC",
        "type": "passive",
        "description": "Oscillator RC timing pin; connect ROSC (10 kΩ-100 kΩ) to VREF and COSC (1 nF-100 nF) to GND; oscillator frequency F ≈ 2/(ROSC × COSC); ramp is ≈1.2 V peak-to-peak centered at 1.6 V; 40-60 kHz typical."
      },
      {
        "number": "26",
        "name": "PWM IN",
        "type": "input",
        "description": "PWM comparator input; compared to E/A OUT to generate the PWM chop command; input current 0-30 μA; typically connected to the RC-OSC ramp for voltage-mode PWM control."
      },
      {
        "number": "27",
        "name": "E/A IN(-)",
        "type": "input",
        "description": "Error amplifier inverting input; input current -5 to +5 μA; common-mode input range 0 V to 3 V; input offset ±10 mV; tie to E/A OUT for unity-gain buffer configuration."
      },
      {
        "number": "28",
        "name": "E/A IN(+)",
        "type": "input",
        "description": "Error amplifier non-inverting input; input current -5 to +5 μA; common-mode input range 0 V to 3 V; voltage gain 70-90 dB; can be driven by ISENSE output, TACH-OUT filter, or external command voltage."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 25,
        "cost_usd": 0.3757,
        "at": "2026-09-22T06:31:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/uc2625",
        "pages": 25,
        "sha256": "dcf54a877fad8159",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "uc2625dwtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          17.9,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "uc2625dwtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          17.9,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9f0d8880b3f3132f5494ed46216454ee5f6bdd95b0ccd782d0dfad042bed31ae",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-28-300mil",
      "Category": "Motor Driver ICs",
      "Pins": "28"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "uc2625dwtr"
  ],
  "discovery_pitch": "UC2625DWTR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "uc2625dwtr.kicad_sym",
    "uc2625dwtr.kicad_mod",
    "uc2625dwtr.glb",
    "uc2625dwtr.step",
    "uc2625dwtr.lbr",
    "docs/hero.png",
    "docs/uc2625dwtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T13:26:51.883Z"
}