main
Ray
ua78l15acdr: specified limits as data (metadata.characteristics, 26 rows from the datasheet)
5b87a25
UA78L15ACDR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
UA78L15ACDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | Output pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the output capacitor as close to the OUT and GND pins of the device as possible. |
| 2 | COMMON | power_in | Ground |
| 3 | COMMON | power_in | Ground |
| 4 | NC | unconnected | No connect pin. This pin is not connected internally. Connect this pin to ground for best thermal performance or leave floating. |
| 5 | NC | unconnected | No connect pin. This pin is not connected internally. Connect this pin to ground for best thermal performance or leave floating. |
| 6 | COMMON | power_in | Ground |
| 7 | COMMON | power_in | Ground |
| 8 | INPUT | input | Input pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the input capacitor as close to the IN and GND pins of the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, TJ = 25°C | VO | 4.8 | 5 | 5.2 | V | VI = 7 V to 20 V, and IO = 1 mA to 40 mA (legacy chip), TJ = 25°C | 6 |
| Output voltage, TJ = full range | VO | 4.75 | 5.25 | V | VI = 7 V to 20 V, and IO = 1 mA to 40 mA (legacy chip), TJ = full range | 6 | |
| Output voltage, TJ = full range, IO up to 70 mA | VO | 4.75 | 5.25 | V | IO = 1 mA to 70 mA, and TJ = full range (legacy chip) | 6 | |
| Input voltage regulation, VI = 7 V to 20 V | 32 | 150 | mV | VI = 7 V to 20 V, and TJ = 25°C (legacy chip) | 6 | ||
| Input voltage regulation, VI = 8 V to 20 V | 26 | 100 | mV | VI = 8 V to 20 V, and TJ = 25°C (legacy chip) | 6 | ||
| Ripple rejection | 41 | 49 | dB | VI = 8 V to 18 V, f = 120 Hz, and TJ = 25°C (legacy chip) | 6 | ||
| Output voltage regulation, IO = 1 mA to 100 mA | 15 | 60 | mV | IO = 1 mA to 100 mA, and TJ = 25°C (legacy chip) | 6 | ||
| Output voltage regulation, IO = 1 mA to 40 mA | 8 | 30 | mV | IO = 1 mA to 40 mA, and TJ = 25°C (legacy chip) | 6 | ||
| Bias current, TJ = 25°C | IQ | 3.8 | 6 | mA | TJ = 25°C (legacy chip) | 7 | |
| Bias current, TJ = 125°C | IQ | 5.5 | mA | TJ = 125°C (legacy chip) | 7 | ||
| Bias current change, line | 1.5 | mA | VI = 8 V to 20 V, and TJ = full range (legacy chip) | 7 | |||
| Bias current change, load | 1.5 | mA | IO = 1 mA to 40 mA, and TJ = full range (legacy chip) | 7 | |||
| Output noise voltage | 42 | µV | f = 10 Hz to 100 kHz, and TJ = 25°C (legacy chip) | 6 | |||
| Dropout voltage | VDO | 1.7 | V | TJ = 25°C (legacy chip) | 6 | ||
| Input voltage | VI | 7 | 20 | V | UA78L05C and UA78L05AC (for both legacy and new chip) | 4 | |
| Output current | IO | 100 | mA | 4 | |||
| Operating junction temperature | TJ | 0 | 125 | °C | UA78L00C and UA78L00AC series (for legacy chip) | 4 | |
| Input capacitor | CIN | 0.33 | µF | 4 | |||
| Output capacitor | COUT | 0.1 | µF | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (SOIC-8, D) | RθJA | 115 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (SOIC-8, D) | RθJC(top) | 60.3 | °C/W | 5 | |||
| Junction-to-board thermal resistance (SOIC-8, D) | RθJB | 55.6 | °C/W | 5 | |||
| Junction-to-top characterization parameter (SOIC-8, D) | ψJT | 16.2 | °C/W | 5 | |||
| Junction-to-board characterization parameter (SOIC-8, D) | ψJB | 55 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
UA78L15ACDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ua78l15acdr-etched.step/ua78l15acdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ua78l15acdr.step/ua78l15acdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
223d628010f1d8e3, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# UA78L15ACDR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
UA78L15ACDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | Output pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the output capacitor as close to the OUT and GND pins of the device as possible. |
| 2 | COMMON | power_in | Ground |
| 3 | COMMON | power_in | Ground |
| 4 | NC | unconnected | No connect pin. This pin is not connected internally. Connect this pin to ground for best thermal performance or leave floating. |
| 5 | NC | unconnected | No connect pin. This pin is not connected internally. Connect this pin to ground for best thermal performance or leave floating. |
| 6 | COMMON | power_in | Ground |
| 7 | COMMON | power_in | Ground |
| 8 | INPUT | input | Input pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the input capacitor as close to the IN and GND pins of the device as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, TJ = 25°C | VO | 4.8 | 5 | 5.2 | V | VI = 7 V to 20 V, and IO = 1 mA to 40 mA (legacy chip), TJ = 25°C | 6 |
| Output voltage, TJ = full range | VO | 4.75 | | 5.25 | V | VI = 7 V to 20 V, and IO = 1 mA to 40 mA (legacy chip), TJ = full range | 6 |
| Output voltage, TJ = full range, IO up to 70 mA | VO | 4.75 | | 5.25 | V | IO = 1 mA to 70 mA, and TJ = full range (legacy chip) | 6 |
| Input voltage regulation, VI = 7 V to 20 V | | | 32 | 150 | mV | VI = 7 V to 20 V, and TJ = 25°C (legacy chip) | 6 |
| Input voltage regulation, VI = 8 V to 20 V | | | 26 | 100 | mV | VI = 8 V to 20 V, and TJ = 25°C (legacy chip) | 6 |
| Ripple rejection | | 41 | 49 | | dB | VI = 8 V to 18 V, f = 120 Hz, and TJ = 25°C (legacy chip) | 6 |
| Output voltage regulation, IO = 1 mA to 100 mA | | | 15 | 60 | mV | IO = 1 mA to 100 mA, and TJ = 25°C (legacy chip) | 6 |
| Output voltage regulation, IO = 1 mA to 40 mA | | | 8 | 30 | mV | IO = 1 mA to 40 mA, and TJ = 25°C (legacy chip) | 6 |
| Bias current, TJ = 25°C | IQ | | 3.8 | 6 | mA | TJ = 25°C (legacy chip) | 7 |
| Bias current, TJ = 125°C | IQ | | | 5.5 | mA | TJ = 125°C (legacy chip) | 7 |
| Bias current change, line | | | | 1.5 | mA | VI = 8 V to 20 V, and TJ = full range (legacy chip) | 7 |
| Bias current change, load | | | | 1.5 | mA | IO = 1 mA to 40 mA, and TJ = full range (legacy chip) | 7 |
| Output noise voltage | | | 42 | | µV | f = 10 Hz to 100 kHz, and TJ = 25°C (legacy chip) | 6 |
| Dropout voltage | VDO | | 1.7 | | V | TJ = 25°C (legacy chip) | 6 |
| Input voltage | VI | 7 | | 20 | V | UA78L05C and UA78L05AC (for both legacy and new chip) | 4 |
| Output current | IO | | | 100 | mA | | 4 |
| Operating junction temperature | TJ | 0 | | 125 | °C | UA78L00C and UA78L00AC series (for legacy chip) | 4 |
| Input capacitor | CIN | | 0.33 | | µF | | 4 |
| Output capacitor | COUT | | 0.1 | | µF | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance (SOIC-8, D) | RθJA | | 115 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance (SOIC-8, D) | RθJC(top) | | 60.3 | | °C/W | | 5 |
| Junction-to-board thermal resistance (SOIC-8, D) | RθJB | | 55.6 | | °C/W | | 5 |
| Junction-to-top characterization parameter (SOIC-8, D) | ψJT | | 16.2 | | °C/W | | 5 |
| Junction-to-board characterization parameter (SOIC-8, D) | ψJB | | 55 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `UA78L15ACDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ua78l15acdr-etched.step` / `ua78l15acdr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ua78l15acdr.step` / `ua78l15acdr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ua78l) (47 pp, sha256 `223d628010f1d8e3`, retrieved 2026-10-01, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ua78l15acdr-datasheet.pdf)