Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UA78L15ACDR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8

UA78L15ACDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT output Output pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the output capacitor as close to the OUT and GND pins of the device as possible.
2 COMMON power_in Ground
3 COMMON power_in Ground
4 NC unconnected No connect pin. This pin is not connected internally. Connect this pin to ground for best thermal performance or leave floating.
5 NC unconnected No connect pin. This pin is not connected internally. Connect this pin to ground for best thermal performance or leave floating.
6 COMMON power_in Ground
7 COMMON power_in Ground
8 INPUT input Input pin. Use the recommended capacitor value as listed in the Recommended Operating Conditions table. Place the input capacitor as close to the IN and GND pins of the device as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage, TJ = 25°C VO 4.8 5 5.2 V VI = 7 V to 20 V, and IO = 1 mA to 40 mA (legacy chip), TJ = 25°C 6
Output voltage, TJ = full range VO 4.75 5.25 V VI = 7 V to 20 V, and IO = 1 mA to 40 mA (legacy chip), TJ = full range 6
Output voltage, TJ = full range, IO up to 70 mA VO 4.75 5.25 V IO = 1 mA to 70 mA, and TJ = full range (legacy chip) 6
Input voltage regulation, VI = 7 V to 20 V 32 150 mV VI = 7 V to 20 V, and TJ = 25°C (legacy chip) 6
Input voltage regulation, VI = 8 V to 20 V 26 100 mV VI = 8 V to 20 V, and TJ = 25°C (legacy chip) 6
Ripple rejection 41 49 dB VI = 8 V to 18 V, f = 120 Hz, and TJ = 25°C (legacy chip) 6
Output voltage regulation, IO = 1 mA to 100 mA 15 60 mV IO = 1 mA to 100 mA, and TJ = 25°C (legacy chip) 6
Output voltage regulation, IO = 1 mA to 40 mA 8 30 mV IO = 1 mA to 40 mA, and TJ = 25°C (legacy chip) 6
Bias current, TJ = 25°C IQ 3.8 6 mA TJ = 25°C (legacy chip) 7
Bias current, TJ = 125°C IQ 5.5 mA TJ = 125°C (legacy chip) 7
Bias current change, line 1.5 mA VI = 8 V to 20 V, and TJ = full range (legacy chip) 7
Bias current change, load 1.5 mA IO = 1 mA to 40 mA, and TJ = full range (legacy chip) 7
Output noise voltage 42 µV f = 10 Hz to 100 kHz, and TJ = 25°C (legacy chip) 6
Dropout voltage VDO 1.7 V TJ = 25°C (legacy chip) 6
Input voltage VI 7 20 V UA78L05C and UA78L05AC (for both legacy and new chip) 4
Output current IO 100 mA 4
Operating junction temperature TJ 0 125 °C UA78L00C and UA78L00AC series (for legacy chip) 4
Input capacitor CIN 0.33 µF 4
Output capacitor COUT 0.1 µF 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance (SOIC-8, D) RθJA 115 °C/W 5
Junction-to-case (top) thermal resistance (SOIC-8, D) RθJC(top) 60.3 °C/W 5
Junction-to-board thermal resistance (SOIC-8, D) RθJB 55.6 °C/W 5
Junction-to-top characterization parameter (SOIC-8, D) ψJT 16.2 °C/W 5
Junction-to-board characterization parameter (SOIC-8, D) ψJB 55 °C/W 5

CAD (KiCad official)

  • Symbol: UA78L15ACDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ua78l15acdr-etched.step / ua78l15acdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ua78l15acdr.step / ua78l15acdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 223d628010f1d8e3, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF