TUSB321RWBR

{
 "schema": "adom/verification@1",
 "part": "TUSB321RWBR",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "12 of 12 pins described from the datasheet (adom-ds2sf, page-cited)",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/tusb321rwbr-datasheet.pdf"
    }
   ],
   "files": {
    "tusb321rwbr.kicad_sym": "cb731e2777dfff2e1a088623b463321eab14f481f1dce9b332da30608cee0176",
    "tusb321rwbr.kicad_mod": "1c32587504791ea9e83a2a70c27a239904052a19d667a2817c37dbe573be7458",
    "tusb321rwbr.step": "9c6e67d811b12fb4c14016753813ddc32535963d52498e6bc29a2ddf8419eca9"
   }
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against TI's TUSB321 datasheet (SLLSEO6C, revised August 2018)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: the page already carries TI's current edition (SLLSEO6C, June 2015, revised August 2018; sha256 ef1cea96d1e85a98 matches ti.com/lit/ds/symlink/tusb321.pdf fetched 2026-10-27); edition now recorded",
     "result": "pass"
    },
    {
     "text": "All 12 pins match the Pin Functions table and the RWB 12-pin X2QFN top view (p.3) by number and name: CC1, CC2, CURRENT_MODE, PORT, VBUS_DET, VCONN_FAULT (printed with an overbar in both the drawing and the table, kept as ~{VCONN_FAULT}), OUT1, OUT2, ID, GND, DIR, VDD; no renames needed",
     "result": "pass"
    },
    {
     "text": "Pin types agree with the table: CC1/CC2 I/O -> bidirectional, CURRENT_MODE/PORT/VBUS_DET I -> input, VCONN_FAULT/ID/DIR O (open drain) -> open_collector, GND G and VDD P -> power_in",
     "result": "pass"
    },
    {
     "text": "OUT1 and OUT2 are typed I/O in the table but described there as open-drain outputs for the UFP current-mode result; kept open_collector",
     "result": "note"
    },
    {
     "text": "All 12 descriptions rewritten to the table wording (p.3); the earlier text added values not in the pin table (5.1 kΩ, 887 kΩ, 95 kΩ, 200 mA, 7-13 µs, VOL, VCONN FET RON, 4.5-5.5 V)",
     "result": "pass"
    },
    {
     "text": "Footprint vs RWB0012A (p.22-23): 12 pads, e = 0.40 mm, in the same orientation as TI's land pattern example: pins 1/2 on the left (1 upper), 3-6 along the bottom, 7/8 on the right (8 upper), 9-12 along the top (12 top-left). Pads 1/2/7/8 0.85 x 0.20 at x = ±0.725, y = ±0.20 (TI 0.7 x 0.2 at ±0.65, 2X 0.4); pads 3-6/9-12 0.20 x 0.65 at y = ±0.825 (TI 0.2 x 0.5 at ±0.75); same inner edges as TI's land, 0.15 longer outward; pad width 0.20 against b 0.15-0.25; no exposed pad",
     "result": "pass"
    },
    {
     "text": "The p.3 pinout figure is drawn rotated 90 degrees from the package drawing and land pattern (pins 1/2 on the top edge there); both are top views numbered counterclockwise, so the numbering agrees",
     "result": "note"
    },
    {
     "text": "3D body 1.60 x 1.60 x 0.40 mm against 1.55-1.65 x 1.55-1.65, 0.4 max (p.22); seated on z = 0, centred on the pads; in the matching GLB the pin-1 dot is at the top-left corner and the two-terminal sides are left/right, the same orientation as the footprint (the square body cannot show a 90-degree error in a bounding box)",
     "result": "pass"
    },
    {
     "text": "DigiKey 296-42400-2-ND (tape and reel; DigiKey product URL names TUSB321RWBR) and Mouser 595-TUSB321RWBR kept and added to specs",
     "result": "pass"
    },
    {
     "text": "Symbol and footprint Datasheet properties point at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (Texas Instruments)",
     "href": "https://www.ti.com/lit/ds/symlink/tusb321.pdf"
    }
   ],
   "files": {
    "tusb321rwbr.kicad_sym": "28345e3ed94b9b4fef5998c8c1c31c8e143a3039e34a0567b76e2a9b7508ad8d",
    "tusb321rwbr.kicad_mod": "884958b833bd65891978282d9a56c455ee81562bb281d67a66dafa824155585a",
    "tusb321rwbr.step": "9c6e67d811b12fb4c14016753813ddc32535963d52498e6bc29a2ddf8419eca9"
   }
  }
 ]
}