component
TUSB321RWBR
Public Made by Adomby adom
Texas Instruments Specialized, X2-QFN-12(1.6x1.6). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTUSB321RWBR
Texas Instruments · Specialized · X2-QFN-12(1.6x1.6)
TUSB321RWBR from Texas Instruments, in a X2-QFN-12(1.6x1.6). Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: KiCad library 3D model Texas_X2QFN-12_1.6x1.6mm_P0.4mm (built with the KiCad generator) (CC-BY-SA 4.0 with the KiCad library exception)). Pin functions are extracted from the manufacturer datasheet with page references.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CC1 | bidirectional | Type-C configuration channel signal 1. [datasheet p.3] |
| 2 | CC2 | bidirectional | Type-C configuration channel signal 2. [datasheet p.3] |
| 3 | CURRENT_MODE | input | Advertise VBUS current. This 3-level input controls current advertisement in DFP mode or DRP mode connected as source. L: default current, pull-down to GND or leave unconnected. M: medium (1.5A) current, pull-up to VDD with a 500-kΩ resistor. H: high (3.0A) current, pull-up to VDD with a 10-kΩ resistor. [datasheet p.3] |
| 4 | PORT | input | Tri-level input pin to indicate port mode; its state is sampled when VDD is active. H: DFP (pull-up to VDD). NC: DRP (leave unconnected). L: UFP (pull-down or tie to GND). [datasheet p.3] |
| 5 | VBUS_DET | input | 5- to 28-V VBUS input voltage. VBUS detection determines UFP attachment. One RVBUS external resistor is required between system VBUS and the VBUS_DET pin. [datasheet p.3] |
| 6 | ~{VCONN_FAULT} | open_collector | Open-drain output, asserted low for tFAULT when a VCONN over-current fault is detected. [datasheet p.3] |
| 7 | OUT1 | open_collector | Open-drain output communicating Type-C current mode detect when the device is in UFP mode: default current mode detected (H); medium or high current mode detected (L). [datasheet p.3] |
| 8 | OUT2 | open_collector | Open-drain output communicating Type-C current mode detect when the device is in UFP mode: default or medium current mode detected (H); high current mode detected (L). [datasheet p.3] |
| 9 | ID | open_collector | Open-drain output; asserted low when the CC pins detect device attachment when the port is a source (DFP), or dual-role (DRP) acting as source (DFP). [datasheet p.3] |
| 10 | GND | power_in | Ground. [datasheet p.3] |
| 11 | DIR | open_collector | Plug direction. This open-drain output indicates the detected plug orientation: Type-C plug position 2 (H); Type-C plug position 1 (L). [datasheet p.3] |
| 12 | VDD | power_in | Positive supply voltage. [datasheet p.3] |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | X2-QFN-12(1.6x1.6) |
| Category | Interface |
| Pins | 12 |
| LCSC | C139392 |
| Mouser | 595-TUSB321RWBR |
| DigiKey | 296-42400-2-ND |
| Distributor summary (LCSC listing, not datasheet) | -40℃ |
CAD
- Symbol:
tusb321rwbr(source libraryInterface_USB:TUSB321) - Footprint:
Package_DFN_QFN:Texas_X2QFN-12_1.6x1.6mm_P0.4mm - 3D model path in footprint:
${KIPRJMOD}/tusb321rwbr.step - 3D files:
tusb321rwbr-etched.step/tusb321rwbr-etched.glbcarry the MPN etch as a separateAdom.LaserEtchpart;tusb321rwbr.step/tusb321rwbr.glbare the bare model. - EAGLE/Fusion library:
tusb321rwbr.lbr(adom-lbr)
Provenance
- Datasheet: Texas Instruments TUSB321 datasheet (SLLSEO6C, revised August 2018, sha256
ef1cea96d1e85a98, retrieved 2026-10-27, tier: mfr) - CAD: Footprint and symbol as used on Adom board designs; 3D model: KiCad library 3D model Texas_X2QFN-12_1.6x1.6mm_P0.4mm (built with the KiCad generator) (CC-BY-SA 4.0 with the KiCad library exception).
- Pins: KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7).