component

TUSB321RWBR

Public Made by Adom

by adom

Texas Instruments Specialized, X2-QFN-12(1.6x1.6). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentinterfacetusb321rwbrboard-derived

Verified TUSB321RWBR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TI's TUSB321 datasheet (SLLSEO6C, revised August 2018)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries TI's current edition (SLLSEO6C, June 2015, revised August 2018; sha256 ef1cea96d1e85a98 matches ti.com/lit/ds/symlink/tusb321.pdf fetched 2026-10-27); edition now recorded
  • ✓All 12 pins match the Pin Functions table and the RWB 12-pin X2QFN top view (p.3) by number and name: CC1, CC2, CURRENT_MODE, PORT, VBUS_DET, VCONN_FAULT (printed with an overbar in both the drawing and the table, kept as ~{VCONN_FAULT}), OUT1, OUT2, ID, GND, DIR, VDD; no renames needed
  • ✓Pin types agree with the table: CC1/CC2 I/O -> bidirectional, CURRENT_MODE/PORT/VBUS_DET I -> input, VCONN_FAULT/ID/DIR O (open drain) -> open_collector, GND G and VDD P -> power_in
  • •OUT1 and OUT2 are typed I/O in the table but described there as open-drain outputs for the UFP current-mode result; kept open_collector
  • ✓All 12 descriptions rewritten to the table wording (p.3); the earlier text added values not in the pin table (5.1 kΩ, 887 kΩ, 95 kΩ, 200 mA, 7-13 µs, VOL, VCONN FET RON, 4.5-5.5 V)
  • ✓Footprint vs RWB0012A (p.22-23): 12 pads, e = 0.40 mm, in the same orientation as TI's land pattern example: pins 1/2 on the left (1 upper), 3-6 along the bottom, 7/8 on the right (8 upper), 9-12 along the top (12 top-left). Pads 1/2/7/8 0.85 x 0.20 at x = ±0.725, y = ±0.20 (TI 0.7 x 0.2 at ±0.65, 2X 0.4); pads 3-6/9-12 0.20 x 0.65 at y = ±0.825 (TI 0.2 x 0.5 at ±0.75); same inner edges as TI's land, 0.15 longer outward; pad width 0.20 against b 0.15-0.25; no exposed pad
  • •The p.3 pinout figure is drawn rotated 90 degrees from the package drawing and land pattern (pins 1/2 on the top edge there); both are top views numbered counterclockwise, so the numbering agrees
  • ✓3D body 1.60 x 1.60 x 0.40 mm against 1.55-1.65 x 1.55-1.65, 0.4 max (p.22); seated on z = 0, centred on the pads; in the matching GLB the pin-1 dot is at the top-left corner and the two-terminal sides are left/right, the same orientation as the footprint (the square body cannot show a 90-degree error in a bounding box)
  • ✓DigiKey 296-42400-2-ND (tape and reel; DigiKey product URL names TUSB321RWBR) and Mouser 595-TUSB321RWBR kept and added to specs
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Texas Instruments)
Verified files✓ tusb321rwbr.kicad_sym✓ tusb321rwbr.kicad_mod✓ tusb321rwbr.step
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓12 of 12 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! tusb321rwbr.kicad_sym! tusb321rwbr.kicad_mod✓ tusb321rwbr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
tusb321rwbr / tusb321rwbr.lbr
HistoryDownload
Caleb Use the English manufacturer datasheet dbd0114 20d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.6.2">
<drawing>
<settings><setting alwaysvectorfont="no"/></settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
</layers>
<library>
<description>-40℃~+85℃ 100uA 100uA 4.5V~5.5V Transceiver X2-QFN-12(1.6x1.6) USB Converters ROHS</description>
<packages>
<package name="TUSB321RWBR">
  <description>12 pads, 2.3 x 2.3 mm. Texas  X2QFN, 12 Pin</description>
  <smd name="1" x="-0.7250" y="0.2000" dx="0.8500" dy="0.2000" layer="1" roundness="50"/>
  <smd name="2" x="-0.7250" y="-0.2000" dx="0.8500" dy="0.2000" layer="1" roundness="50"/>
  <smd name="3" x="-0.6000" y="-0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="4" x="-0.2000" y="-0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="5" x="0.2000" y="-0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="6" x="0.6000" y="-0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="7" x="0.7250" y="-0.2000" dx="0.8500" dy="0.2000" layer="1" roundness="50"/>
  <smd name="8" x="0.7250" y="0.2000" dx="0.8500" dy="0.2000" layer="1" roundness="50"/>
  <smd name="9" x="0.6000" y="0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="10" x="0.2000" y="0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="11" x="-0.2000" y="0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <smd name="12" x="-0.6000" y="0.8250" dx="0.2000" dy="0.6500" layer="1" roundness="50"/>
  <polygon width="0.1200" layer="21">
    <vertex x="-1.2100" y="0.9100"/>
    <vertex x="-1.4500" y="1.2400"/>
    <vertex x="-0.9700" y="1.2400"/>
  </polygon>
  <polygon width="0.1000" layer="51">
    <vertex x="-0.8000" y="0.4000"/>
    <vertex x="-0.8000" y="-0.8000"/>
    <vertex x="0.8000" y="-0.8000"/>
    <vertex x="0.8000" y="0.8000"/>
    <vertex x="-0.4000" y="0.8000"/>
  </polygon>
  <wire x1="0.9600" y1="0.9100" x2="0.9600" y2="0.5600" width="0.1200" layer="21"/>
  <wire x1="-1.2100" y1="0.5600" x2="-1.2100" y2="0.6700" width="0.1200" layer="21"/>
  <wire x1="0.9600" y1="-0.9100" x2="0.9600" y2="-0.5600" width="0.1200" layer="21"/>
  <wire x1="-0.9600" y1="-0.9100" x2="-0.9600" y2="-0.5600" width="0.1200" layer="21"/>
  <text x="0" y="1.750" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
  <text x="0" y="-1.750" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
</package>
</packages>
<symbols>
<symbol name="TUSB321RWBR">
  <description>-40℃~+85℃ 100uA 100uA 4.5V~5.5V Transceiver X2-QFN-12(1.6x1.6) USB Converters ROHS</description>
  <wire x1="-24.13" y1="10.16" x2="24.13" y2="10.16" width="0.254" layer="94"/>
  <wire x1="24.13" y1="10.16" x2="24.13" y2="-10.16" width="0.254" layer="94"/>
  <wire x1="24.13" y1="-10.16" x2="-24.13" y2="-10.16" width="0.254" layer="94"/>
  <wire x1="-24.13" y1="-10.16" x2="-24.13" y2="10.16" width="0.254" layer="94"/>
  <text x="-11.4300" y="11.4300" size="1.27" layer="95" align="center">&gt;NAME</text>
  <text x="7.6200" y="11.4300" size="1.27" layer="96" align="center">&gt;VALUE</text>
  <pin name="CC1" x="29.21" y="7.62" length="middle" direction="io" rot="R180"/>
  <pin name="CC2" x="29.21" y="5.08" length="middle" direction="io" rot="R180"/>
  <pin name="CURRENT_MODE" x="-29.21" y="7.62" length="middle" direction="in"/>
  <pin name="PORT" x="-29.21" y="5.08" length="middle" direction="in"/>
  <pin name="VBUS_DET" x="-29.21" y="-2.54" length="middle" direction="in"/>
  <pin name="!VCONN_FAULT!" x="29.21" y="-7.62" length="middle" direction="oc" rot="R180"/>
  <pin name="OUT1" x="29.21" y="-2.54" length="middle" direction="oc" rot="R180"/>
  <pin name="OUT2" x="29.21" y="-5.079999999999999" length="middle" direction="oc" rot="R180"/>
  <pin name="ID" x="29.21" y="0" length="middle" direction="oc" rot="R180"/>
  <pin name="GND" x="-29.21" y="0" length="middle" direction="pwr"/>
  <pin name="DIR" x="29.21" y="2.54" length="middle" direction="oc" rot="R180"/>
  <pin name="VDD" x="-29.21" y="-5.079999999999999" length="middle" direction="pwr"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="TUSB321RWBR" prefix="U">
  <description>-40℃~+85℃ 100uA 100uA 4.5V~5.5V Transceiver X2-QFN-12(1.6x1.6) USB Converters ROHS</description>
  <gates>
    <gate name="G$1" symbol="TUSB321RWBR" x="0" y="0"/>
  </gates>
  <devices>
    <device name="" package="TUSB321RWBR">
      <connects>
        <connect gate="G$1" pin="CC1" pad="1"/>
        <connect gate="G$1" pin="CC2" pad="2"/>
        <connect gate="G$1" pin="CURRENT_MODE" pad="3"/>
        <connect gate="G$1" pin="PORT" pad="4"/>
        <connect gate="G$1" pin="VBUS_DET" pad="5"/>
        <connect gate="G$1" pin="!VCONN_FAULT!" pad="6"/>
        <connect gate="G$1" pin="OUT1" pad="7"/>
        <connect gate="G$1" pin="OUT2" pad="8"/>
        <connect gate="G$1" pin="ID" pad="9"/>
        <connect gate="G$1" pin="GND" pad="10"/>
        <connect gate="G$1" pin="DIR" pad="11"/>
        <connect gate="G$1" pin="VDD" pad="12"/>
      </connects>
      <technologies>
        <technology name="">
          <attribute name="MPN" value="TUSB321RWBR" constant="no"/>
          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>
          <attribute name="DATASHEET" value="https://www.ti.com/lit/ds/symlink/tusb321.pdf" constant="no"/>
          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/tusb321rwbr" constant="no"/>
          <attribute name="MOUSER_PN" value="595-TUSB321RWBR" constant="no"/>
          <attribute name="DIGIKEY_PN" value="296-42400-2-ND" constant="no"/>
          <attribute name="LCSC_PN" value="C139392" constant="no"/>
        </technology>
      </technologies>
    </device>
  </devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>