main
Ray
Publish 0.1.0
4f71ff9
TTP277-AO8N
Tontek Design Tech · Touch Sensors · SOP-8
TTP277-AO8N from Tontek Design Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC2/TP2 | bidirectional | Port C bit 2 general IO (IO/I) with touch pad 2 input, IO cell type A with pull-up and wake-up. |
| 2 | CAP | output | Touch signal output for the touch pad sensing capacitor. |
| 3 | PA0/INT0/PWM0/VPP | bidirectional | Port A bit 0 IO with external interrupt INT0 input and PWM0 output; input has pull-down resistor and no wake-up, output is open drain, shared with MTP VPP pin, input must stay within VSS-0.3V to VDD+0.3V. |
| 4 | VSS | power_in | Negative power supply, ground. |
| 5 | PA1/INT1/PWM1 | bidirectional | Port A bit 1 IO with external interrupt INT1 input and PWM1 output. |
| 6 | VDD | power_in | Positive power supply, 3.5V to 5.5V with LVR=2.7V or 2.2V to 5.5V with LVR=2.0V. |
| 7 | PC0/TP0/PWM3 | bidirectional | Port C bit 0 IO with touch pad 0 input and PWM3 output. |
| 8 | PC1/TP1/PWM4 | bidirectional | Port C bit 1 IO with touch pad 1 input and PWM4 output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tontek Design Tech |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature | Top | -40 | 85 | ℃ | 6 | ||
| Storage Temperature | Tst | -50 | 125 | ℃ | 6 | ||
| Supply Voltage | VDD | -0.3 | 6 | V | relative to VSS (VSS-0.3 to VSS+6.0) | 6 | |
| Input Voltage | Vin | -0.3 | 0.3 | V | VSS-0.3 to VDD+0.3 | 6 | |
| Operating Voltage (LVR 2.0V) | VDD | 2.2 | 5.5 | V | FCPU=4MHz, LVR on 2.0V | 7 | |
| Operating Voltage (LVR 2.7V) | VDD | 3.5 | 5.5 | V | FCPU=4MHz, LVR on 2.7V | 7 | |
| Low Voltage Reset 2.0V | VLVR1 | 2 | 2.1 | V | LVR select 2.0V | 7 | |
| Low Voltage Reset 2.7V | VLVR2 | 2.7 | 3.3 | V | LVR select 2.7V | 7 | |
| Operating Current Normal Mode 1 | Ind1 | 2.5 | 3 | mA | VDD=5.0V, no load, RC32K on, RC8M on, FCPU=4MHz, LVR on | 7 | |
| Operating Current Normal Mode 2 | Ind2 | 30 | 50 | uA | VDD=5.0V, no load, RC32K on, RC8M off, FCPU=32KHz, LVR on | 7 | |
| Operating Current Sleep Mode 1 | Isd1 | 0.9 | 1.3 | mA | VDD=5.0V, no load, RC32K on, RC8M on, LVR on | 7 | |
| Operating Current Sleep Mode 2 | Isd2 | 7 | 12 | uA | VDD=3.0V, no load, RC32K on, RC8M off, LVR on | 7 | |
| Standby Current (Stop Mode) | Isd3 | 3 | uA | VDD=5.0V, no load, RC32K off, RC8M off, LVR on | 7 | ||
| LVR Current | ILVR | 1 | 2 | uA | VDD=5.0V | 7 | |
| Input Low Voltage (Input Ports) | VIL1 | 0 | 0.2 | VDD | Input Low Voltage | 7 | |
| Input High Voltage (Input Ports) | VIH1 | 0.8 | 1 | VDD | Input High Voltage | 7 | |
| Input Low Voltage (INT) | VIL2 | 0 | 0.3 | VDD | Input Low Voltage | 7 | |
| Input High Voltage (INT) | VIH2 | 0.7 | 1 | VDD | Input High Voltage | 7 | |
| IO Port Pull-up Resistor (exclude PA0) | RPH1 | 100 | 150 | 200 | KΩ | VDD=5.0V | 7 |
| PA0 Pull-down Resistor | RPD1 | 35 | 50 | 65 | KΩ | VDD=5.0V | 7 |
| System Stable Time After Power Up | 40 | ms | After power up, the system needs to initialize the configured state and OST. | 8 | |||
| Wake Up Low active pulse width | tWKUP | 4 | OSCL | 8 | |||
| Startup Period of system clock TOSCH | TOSCH | 8 | OSCH | (Built-in RC) Wake-up from off mode | 8 | ||
| Startup Period of system clock TOSCL | TOSCL | 8 | OSCL | (Built-in RC) Wake-up from off mode | 8 | ||
| External Reset Low active pulse width | tRES. | 2 | CPU clock | 8 | |||
| Interrupt Input Low active pulse width | tINT. | 2 | CPU clock | 8 | |||
| Stable time of System Clock Switching TOSCH | TOSCH | 8 | OSCH | (Built-in RC) OSCL to OSCH & OSCH off | 8 | ||
| Stable time of System Clock Switching TOSCL | TOSCL | 8 | OSCL | (Built-in RC) OSCH to OSCL & OSCL on | 8 | ||
| Output port Sink Current (exclude PA0) | IOL2 | 8 | mA | VDD=5.0V, VOL=0.6V | 7 | ||
| Output Port Source Current (exclude PA0) | IOH2 | -4 | mA | VDD=5V, VOH=4.3V | 7 | ||
| PA0 Sink Current (open drain) | IOL1 | 8 | mA | VDD=5.0V, VOL=0.6V | 7 |
CAD (KiCad official)
- Symbol:
TTP277-AO8N - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ttp277-ao8n-etched.step/ttp277-ao8n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ttp277-ao8n.step/ttp277-ao8n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tontek Design Tech datasheet (58 pp, sha256
944310f4bec268a9, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TTP277-AO8N
**Tontek Design Tech** · Touch Sensors · SOP-8
TTP277-AO8N from Tontek Design Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC2/TP2 | bidirectional | Port C bit 2 general IO (IO/I) with touch pad 2 input, IO cell type A with pull-up and wake-up. |
| 2 | CAP | output | Touch signal output for the touch pad sensing capacitor. |
| 3 | PA0/INT0/PWM0/VPP | bidirectional | Port A bit 0 IO with external interrupt INT0 input and PWM0 output; input has pull-down resistor and no wake-up, output is open drain, shared with MTP VPP pin, input must stay within VSS-0.3V to VDD+0.3V. |
| 4 | VSS | power_in | Negative power supply, ground. |
| 5 | PA1/INT1/PWM1 | bidirectional | Port A bit 1 IO with external interrupt INT1 input and PWM1 output. |
| 6 | VDD | power_in | Positive power supply, 3.5V to 5.5V with LVR=2.7V or 2.2V to 5.5V with LVR=2.0V. |
| 7 | PC0/TP0/PWM3 | bidirectional | Port C bit 0 IO with touch pad 0 input and PWM3 output. |
| 8 | PC1/TP1/PWM4 | bidirectional | Port C bit 1 IO with touch pad 1 input and PWM4 output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tontek Design Tech |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature | Top | -40 | | 85 | ℃ | | 6 |
| Storage Temperature | Tst | -50 | | 125 | ℃ | | 6 |
| Supply Voltage | VDD | -0.3 | | 6 | V | relative to VSS (VSS-0.3 to VSS+6.0) | 6 |
| Input Voltage | Vin | -0.3 | | 0.3 | V | VSS-0.3 to VDD+0.3 | 6 |
| Operating Voltage (LVR 2.0V) | VDD | 2.2 | | 5.5 | V | FCPU=4MHz, LVR on 2.0V | 7 |
| Operating Voltage (LVR 2.7V) | VDD | 3.5 | | 5.5 | V | FCPU=4MHz, LVR on 2.7V | 7 |
| Low Voltage Reset 2.0V | VLVR1 | | 2 | 2.1 | V | LVR select 2.0V | 7 |
| Low Voltage Reset 2.7V | VLVR2 | | 2.7 | 3.3 | V | LVR select 2.7V | 7 |
| Operating Current Normal Mode 1 | Ind1 | | 2.5 | 3 | mA | VDD=5.0V, no load, RC32K on, RC8M on, FCPU=4MHz, LVR on | 7 |
| Operating Current Normal Mode 2 | Ind2 | | 30 | 50 | uA | VDD=5.0V, no load, RC32K on, RC8M off, FCPU=32KHz, LVR on | 7 |
| Operating Current Sleep Mode 1 | Isd1 | | 0.9 | 1.3 | mA | VDD=5.0V, no load, RC32K on, RC8M on, LVR on | 7 |
| Operating Current Sleep Mode 2 | Isd2 | | 7 | 12 | uA | VDD=3.0V, no load, RC32K on, RC8M off, LVR on | 7 |
| Standby Current (Stop Mode) | Isd3 | | | 3 | uA | VDD=5.0V, no load, RC32K off, RC8M off, LVR on | 7 |
| LVR Current | ILVR | | 1 | 2 | uA | VDD=5.0V | 7 |
| Input Low Voltage (Input Ports) | VIL1 | 0 | | 0.2 | VDD | Input Low Voltage | 7 |
| Input High Voltage (Input Ports) | VIH1 | 0.8 | | 1 | VDD | Input High Voltage | 7 |
| Input Low Voltage (INT) | VIL2 | 0 | | 0.3 | VDD | Input Low Voltage | 7 |
| Input High Voltage (INT) | VIH2 | 0.7 | | 1 | VDD | Input High Voltage | 7 |
| IO Port Pull-up Resistor (exclude PA0) | RPH1 | 100 | 150 | 200 | KΩ | VDD=5.0V | 7 |
| PA0 Pull-down Resistor | RPD1 | 35 | 50 | 65 | KΩ | VDD=5.0V | 7 |
| System Stable Time After Power Up | | | | 40 | ms | After power up, the system needs to initialize the configured state and OST. | 8 |
| Wake Up Low active pulse width | tWKUP | 4 | | | OSCL | | 8 |
| Startup Period of system clock TOSCH | TOSCH | 8 | | | OSCH | (Built-in RC) Wake-up from off mode | 8 |
| Startup Period of system clock TOSCL | TOSCL | 8 | | | OSCL | (Built-in RC) Wake-up from off mode | 8 |
| External Reset Low active pulse width | tRES. | 2 | | | CPU clock | | 8 |
| Interrupt Input Low active pulse width | tINT. | 2 | | | CPU clock | | 8 |
| Stable time of System Clock Switching TOSCH | TOSCH | 8 | | | OSCH | (Built-in RC) OSCL to OSCH & OSCH off | 8 |
| Stable time of System Clock Switching TOSCL | TOSCL | 8 | | | OSCL | (Built-in RC) OSCH to OSCL & OSCL on | 8 |
| Output port Sink Current (exclude PA0) | IOL2 | | 8 | | mA | VDD=5.0V, VOL=0.6V | 7 |
| Output Port Source Current (exclude PA0) | IOH2 | | -4 | | mA | VDD=5V, VOH=4.3V | 7 |
| PA0 Sink Current (open drain) | IOL1 | | 8 | | mA | VDD=5.0V, VOL=0.6V | 7 |
## CAD (KiCad official)
- Symbol: `TTP277-AO8N`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ttp277-ao8n-etched.step` / `ttp277-ao8n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ttp277-ao8n.step` / `ttp277-ao8n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Tontek Design Tech datasheet](docs/ttp277-ao8n-datasheet.pdf) (58 pp, sha256 `944310f4bec268a9`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ttp277-ao8n-datasheet.pdf)