main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ttp277-ao8n: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ttp277-ao8n-etched.glb Publish 0.1.0 · Ray
ttp277-ao8n-etched.step ttp277-ao8n: factory component page (tier=lcsc) · Ray
ttp277-ao8n-hero.glb ttp277-ao8n: hero GLB from the etched model (keeps the MPN mark) · Ray
ttp277-ao8n-hero.overlay.json Publish 0.1.0 · Ray
ttp277-ao8n.glb Publish 0.1.0 · Ray
ttp277-ao8n.kicad_mod Publish 0.1.0 · Ray
ttp277-ao8n.kicad_sym Publish 0.1.0 · Ray
ttp277-ao8n.lbr Publish 0.1.0 · Ray
ttp277-ao8n.step Publish 0.1.0 · Ray

TTP277-AO8N

Tontek Design Tech · Touch Sensors · SOP-8

TTP277-AO8N from Tontek Design Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PC2/TP2 bidirectional Port C bit 2 general IO (IO/I) with touch pad 2 input, IO cell type A with pull-up and wake-up.
2 CAP output Touch signal output for the touch pad sensing capacitor.
3 PA0/INT0/PWM0/VPP bidirectional Port A bit 0 IO with external interrupt INT0 input and PWM0 output; input has pull-down resistor and no wake-up, output is open drain, shared with MTP VPP pin, input must stay within VSS-0.3V to VDD+0.3V.
4 VSS power_in Negative power supply, ground.
5 PA1/INT1/PWM1 bidirectional Port A bit 1 IO with external interrupt INT1 input and PWM1 output.
6 VDD power_in Positive power supply, 3.5V to 5.5V with LVR=2.7V or 2.2V to 5.5V with LVR=2.0V.
7 PC0/TP0/PWM3 bidirectional Port C bit 0 IO with touch pad 0 input and PWM3 output.
8 PC1/TP1/PWM4 bidirectional Port C bit 1 IO with touch pad 1 input and PWM4 output.

Key specifications

Parameter Value
Manufacturer Tontek Design Tech
Package SOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature Top -40 85 ℃ 6
Storage Temperature Tst -50 125 ℃ 6
Supply Voltage VDD -0.3 6 V relative to VSS (VSS-0.3 to VSS+6.0) 6
Input Voltage Vin -0.3 0.3 V VSS-0.3 to VDD+0.3 6
Operating Voltage (LVR 2.0V) VDD 2.2 5.5 V FCPU=4MHz, LVR on 2.0V 7
Operating Voltage (LVR 2.7V) VDD 3.5 5.5 V FCPU=4MHz, LVR on 2.7V 7
Low Voltage Reset 2.0V VLVR1 2 2.1 V LVR select 2.0V 7
Low Voltage Reset 2.7V VLVR2 2.7 3.3 V LVR select 2.7V 7
Operating Current Normal Mode 1 Ind1 2.5 3 mA VDD=5.0V, no load, RC32K on, RC8M on, FCPU=4MHz, LVR on 7
Operating Current Normal Mode 2 Ind2 30 50 uA VDD=5.0V, no load, RC32K on, RC8M off, FCPU=32KHz, LVR on 7
Operating Current Sleep Mode 1 Isd1 0.9 1.3 mA VDD=5.0V, no load, RC32K on, RC8M on, LVR on 7
Operating Current Sleep Mode 2 Isd2 7 12 uA VDD=3.0V, no load, RC32K on, RC8M off, LVR on 7
Standby Current (Stop Mode) Isd3 3 uA VDD=5.0V, no load, RC32K off, RC8M off, LVR on 7
LVR Current ILVR 1 2 uA VDD=5.0V 7
Input Low Voltage (Input Ports) VIL1 0 0.2 VDD Input Low Voltage 7
Input High Voltage (Input Ports) VIH1 0.8 1 VDD Input High Voltage 7
Input Low Voltage (INT) VIL2 0 0.3 VDD Input Low Voltage 7
Input High Voltage (INT) VIH2 0.7 1 VDD Input High Voltage 7
IO Port Pull-up Resistor (exclude PA0) RPH1 100 150 200 KΩ VDD=5.0V 7
PA0 Pull-down Resistor RPD1 35 50 65 KΩ VDD=5.0V 7
System Stable Time After Power Up 40 ms After power up, the system needs to initialize the configured state and OST. 8
Wake Up Low active pulse width tWKUP 4 OSCL 8
Startup Period of system clock TOSCH TOSCH 8 OSCH (Built-in RC) Wake-up from off mode 8
Startup Period of system clock TOSCL TOSCL 8 OSCL (Built-in RC) Wake-up from off mode 8
External Reset Low active pulse width tRES. 2 CPU clock 8
Interrupt Input Low active pulse width tINT. 2 CPU clock 8
Stable time of System Clock Switching TOSCH TOSCH 8 OSCH (Built-in RC) OSCL to OSCH & OSCH off 8
Stable time of System Clock Switching TOSCL TOSCL 8 OSCL (Built-in RC) OSCH to OSCL & OSCL on 8
Output port Sink Current (exclude PA0) IOL2 8 mA VDD=5.0V, VOL=0.6V 7
Output Port Source Current (exclude PA0) IOH2 -4 mA VDD=5V, VOH=4.3V 7
PA0 Sink Current (open drain) IOL1 8 mA VDD=5.0V, VOL=0.6V 7

CAD (KiCad official)

  • Symbol: TTP277-AO8N
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ttp277-ao8n-etched.step / ttp277-ao8n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ttp277-ao8n.step / ttp277-ao8n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tontek Design Tech datasheet (58 pp, sha256 944310f4bec268a9, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF