main
Ray
Publish 0.1.0
1d7abf5
TSZ121ILT
STMicroelectronics · Precision OpAmps · SOT-23-5
TSZ121ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Rail-to-rail amplifier output that swings to within 30 mV of either supply rail at 25 °C with a 10 kΩ load. |
| 2 | VCC- | power_in | Negative supply (ground in single-supply use); supply span VCC is 1.8 V to 5.5 V. |
| 3 | IN+ | input | Non-inverting input with rail-to-rail common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor. |
| 4 | IN- | input | Inverting input with rail-to-rail common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor. |
| 5 | VCC+ | power_in | Positive supply, 1.8 V to 5.5 V (absolute maximum 6 V); a 0.1 µF decoupling capacitor close to the pin is strongly recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 3 | |||
| Input current | Iin | 10 | mA | must be limited by series resistor | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| ESD HBM | ESD | 4 | kV | human body model | 3 | ||
| ESD MM | ESD | 300 | V | machine model | 3 | ||
| ESD CDM | ESD | 1.5 | kV | charged device model | 3 | ||
| Latch-up immunity | 200 | mA | 3 | ||||
| Supply voltage | VCC | 1.8 | 5.5 | V | 3 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 3 | ||
| Thermal resistance junction to ambient, SOT23-5 | Rthja | 250 | °C/W | SOT23-5, typical value | 3 | ||
| Input offset voltage | Vio | 1 | 5 | μV | VCC+ = 5 V, T = 25 °C | 6 | |
| Input offset voltage | Vio | 8 | μV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Input offset voltage drift | ΔVio/ΔT | 10 | 30 | nV/°C | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | |
| Input bias current | Iib | 70 | 200 | pA | VCC+ = 5 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 6 | |
| Input bias current | Iib | 300 | pA | VCC+ = 5 V, Vout = VCC/2, -40 °C < T < 125 °C, guaranteed by design | 6 | ||
| Input offset current | Iio | 140 | 400 | pA | VCC+ = 5 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 6 | |
| Input offset current | Iio | 600 | pA | VCC+ = 5 V, Vout = VCC/2, -40 °C < T < 125 °C, guaranteed by design | 6 | ||
| Common mode rejection ratio | CMR | 115 | 136 | dB | VCC+ = 5 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 6 | |
| Common mode rejection ratio | CMR | 115 | dB | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Supply voltage rejection ratio | SVR | 120 | 140 | dB | VCC = 1.8 V to 5.5 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 6 | |
| Supply voltage rejection ratio | SVR | 120 | dB | VCC = 1.8 V to 5.5 V, -40 °C < T < 125 °C | 6 | ||
| Large signal voltage gain | Avd | 120 | 135 | dB | VCC+ = 5 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C | 6 | |
| Large signal voltage gain | Avd | 110 | dB | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| High-level output voltage | VOH | 30 | mV | VCC+ = 5 V, T = 25 °C | 6 | ||
| High-level output voltage | VOH | 70 | mV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Low-level output voltage | VOL | 30 | mV | VCC+ = 5 V, T = 25 °C | 6 | ||
| Low-level output voltage | VOL | 70 | mV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 | ||
| Output sink current | Isink | 15 | 18 | mA | VCC+ = 5 V, Vout = VCC, T = 25 °C | 6 | |
| Output sink current | Isink | 14 | mA | VCC+ = 5 V, Vout = VCC, -40 °C < T < 125 °C | 6 | ||
| Output source current | Isource | 14 | 17 | mA | VCC+ = 5 V, Vout = 0 V, T = 25 °C | 6 | |
| Output source current | Isource | 12 | mA | VCC+ = 5 V, Vout = 0 V, -40 °C < T < 125 °C | 6 | ||
| Supply current (per amplifier) | ICC | 31 | 40 | μA | VCC+ = 5 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 6 | |
| Supply current (per amplifier) | ICC | 40 | μA | VCC+ = 5 V, Vout = VCC/2, RL > 1 MΩ, -40 °C < T < 125 °C | 6 | ||
| Input offset voltage | Vio | 1 | 5 | μV | VCC+ = 1.8 V, T = 25 °C | 4 | |
| Input offset voltage | Vio | 8 | μV | VCC+ = 1.8 V, -40 °C < T < 125 °C | 4 | ||
| Input offset voltage drift | ΔVio/ΔT | 10 | 30 | nV/°C | VCC+ = 1.8 V, -40 °C < T < 125 °C | 4 | |
| Input bias current | Iib | 50 | 200 | pA | VCC+ = 1.8 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 4 | |
| Input offset current | Iio | 100 | 400 | pA | VCC+ = 1.8 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 4 | |
| Common mode rejection ratio | CMR | 110 | 122 | dB | VCC+ = 1.8 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 4 | |
| Large signal voltage gain | Avd | 118 | 135 | dB | VCC+ = 1.8 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C | 4 | |
| High-level output voltage | VOH | 30 | mV | VCC+ = 1.8 V, T = 25 °C | 4 | ||
| Low-level output voltage | VOL | 30 | mV | VCC+ = 1.8 V, T = 25 °C | 4 | ||
| Output sink current | Isink | 7 | 8 | mA | VCC+ = 1.8 V, Vout = VCC, T = 25 °C | 4 | |
| Output source current | Isource | 5 | 7 | mA | VCC+ = 1.8 V, Vout = 0 V, T = 25 °C | 4 | |
| Supply current (per amplifier) | ICC | 28 | 40 | μA | VCC+ = 1.8 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 4 | |
| Input offset voltage | Vio | 1 | 5 | μV | VCC+ = 3.3 V, T = 25 °C | 5 | |
| Input offset voltage | Vio | 8 | μV | VCC+ = 3.3 V, -40 °C < T < 125 °C | 5 | ||
| Input offset voltage drift | ΔVio/ΔT | 10 | 30 | nV/°C | VCC+ = 3.3 V, -40 °C < T < 125 °C | 5 | |
| Input bias current | Iib | 60 | 200 | pA | VCC+ = 3.3 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 5 | |
| Input offset current | Iio | 120 | 400 | pA | VCC+ = 3.3 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 5 | |
| Common mode rejection ratio | CMR | 115 | 128 | dB | VCC+ = 3.3 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 5 | |
| Large signal voltage gain | Avd | 118 | 135 | dB | VCC+ = 3.3 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C | 5 | |
| High-level output voltage | VOH | 30 | mV | VCC+ = 3.3 V, T = 25 °C | 5 | ||
| Low-level output voltage | VOL | 30 | mV | VCC+ = 3.3 V, T = 25 °C | 5 | ||
| Output sink current | Isink | 15 | 18 | mA | VCC+ = 3.3 V, Vout = VCC, T = 25 °C | 5 | |
| Output source current | Isource | 14 | 16 | mA | VCC+ = 3.3 V, Vout = 0 V, T = 25 °C | 5 | |
| Supply current (per amplifier) | ICC | 29 | 40 | μA | VCC+ = 3.3 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The copper traces that connect the output pins to the load and supply pins should be as wide as possible to | 17 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TSZ121ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tsz121ilt-etched.step/tsz121ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsz121ilt.step/tsz121ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (37 pp, sha256
4a57160e181dd503, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TSZ121ILT
**STMicroelectronics** · Precision OpAmps · SOT-23-5
TSZ121ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Rail-to-rail amplifier output that swings to within 30 mV of either supply rail at 25 °C with a 10 kΩ load. |
| 2 | VCC- | power_in | Negative supply (ground in single-supply use); supply span VCC is 1.8 V to 5.5 V. |
| 3 | IN+ | input | Non-inverting input with rail-to-rail common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor. |
| 4 | IN- | input | Inverting input with rail-to-rail common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor. |
| 5 | VCC+ | power_in | Positive supply, 1.8 V to 5.5 V (absolute maximum 6 V); a 0.1 µF decoupling capacitor close to the pin is strongly recommended. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | | | 6 | V | | 3 |
| Input current | Iin | | | 10 | mA | must be limited by series resistor | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Maximum junction temperature | Tj | | | 150 | °C | | 3 |
| ESD HBM | ESD | | | 4 | kV | human body model | 3 |
| ESD MM | ESD | | | 300 | V | machine model | 3 |
| ESD CDM | ESD | | | 1.5 | kV | charged device model | 3 |
| Latch-up immunity | | | | 200 | mA | | 3 |
| Supply voltage | VCC | 1.8 | | 5.5 | V | | 3 |
| Operating free air temperature range | Toper | -40 | | 125 | °C | | 3 |
| Thermal resistance junction to ambient, SOT23-5 | Rthja | | 250 | | °C/W | SOT23-5, typical value | 3 |
| Input offset voltage | Vio | | 1 | 5 | μV | VCC+ = 5 V, T = 25 °C | 6 |
| Input offset voltage | Vio | | | 8 | μV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 |
| Input offset voltage drift | ΔVio/ΔT | | 10 | 30 | nV/°C | VCC+ = 5 V, -40 °C < T < 125 °C | 6 |
| Input bias current | Iib | | 70 | 200 | pA | VCC+ = 5 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 6 |
| Input bias current | Iib | | | 300 | pA | VCC+ = 5 V, Vout = VCC/2, -40 °C < T < 125 °C, guaranteed by design | 6 |
| Input offset current | Iio | | 140 | 400 | pA | VCC+ = 5 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 6 |
| Input offset current | Iio | | | 600 | pA | VCC+ = 5 V, Vout = VCC/2, -40 °C < T < 125 °C, guaranteed by design | 6 |
| Common mode rejection ratio | CMR | 115 | 136 | | dB | VCC+ = 5 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 6 |
| Common mode rejection ratio | CMR | 115 | | | dB | VCC+ = 5 V, -40 °C < T < 125 °C | 6 |
| Supply voltage rejection ratio | SVR | 120 | 140 | | dB | VCC = 1.8 V to 5.5 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 6 |
| Supply voltage rejection ratio | SVR | 120 | | | dB | VCC = 1.8 V to 5.5 V, -40 °C < T < 125 °C | 6 |
| Large signal voltage gain | Avd | 120 | 135 | | dB | VCC+ = 5 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C | 6 |
| Large signal voltage gain | Avd | 110 | | | dB | VCC+ = 5 V, -40 °C < T < 125 °C | 6 |
| High-level output voltage | VOH | | | 30 | mV | VCC+ = 5 V, T = 25 °C | 6 |
| High-level output voltage | VOH | | | 70 | mV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 |
| Low-level output voltage | VOL | | | 30 | mV | VCC+ = 5 V, T = 25 °C | 6 |
| Low-level output voltage | VOL | | | 70 | mV | VCC+ = 5 V, -40 °C < T < 125 °C | 6 |
| Output sink current | Isink | 15 | 18 | | mA | VCC+ = 5 V, Vout = VCC, T = 25 °C | 6 |
| Output sink current | Isink | 14 | | | mA | VCC+ = 5 V, Vout = VCC, -40 °C < T < 125 °C | 6 |
| Output source current | Isource | 14 | 17 | | mA | VCC+ = 5 V, Vout = 0 V, T = 25 °C | 6 |
| Output source current | Isource | 12 | | | mA | VCC+ = 5 V, Vout = 0 V, -40 °C < T < 125 °C | 6 |
| Supply current (per amplifier) | ICC | | 31 | 40 | μA | VCC+ = 5 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 6 |
| Supply current (per amplifier) | ICC | | | 40 | μA | VCC+ = 5 V, Vout = VCC/2, RL > 1 MΩ, -40 °C < T < 125 °C | 6 |
| Input offset voltage | Vio | | 1 | 5 | μV | VCC+ = 1.8 V, T = 25 °C | 4 |
| Input offset voltage | Vio | | | 8 | μV | VCC+ = 1.8 V, -40 °C < T < 125 °C | 4 |
| Input offset voltage drift | ΔVio/ΔT | | 10 | 30 | nV/°C | VCC+ = 1.8 V, -40 °C < T < 125 °C | 4 |
| Input bias current | Iib | | 50 | 200 | pA | VCC+ = 1.8 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 4 |
| Input offset current | Iio | | 100 | 400 | pA | VCC+ = 1.8 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 4 |
| Common mode rejection ratio | CMR | 110 | 122 | | dB | VCC+ = 1.8 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 4 |
| Large signal voltage gain | Avd | 118 | 135 | | dB | VCC+ = 1.8 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C | 4 |
| High-level output voltage | VOH | | | 30 | mV | VCC+ = 1.8 V, T = 25 °C | 4 |
| Low-level output voltage | VOL | | | 30 | mV | VCC+ = 1.8 V, T = 25 °C | 4 |
| Output sink current | Isink | 7 | 8 | | mA | VCC+ = 1.8 V, Vout = VCC, T = 25 °C | 4 |
| Output source current | Isource | 5 | 7 | | mA | VCC+ = 1.8 V, Vout = 0 V, T = 25 °C | 4 |
| Supply current (per amplifier) | ICC | | 28 | 40 | μA | VCC+ = 1.8 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 4 |
| Input offset voltage | Vio | | 1 | 5 | μV | VCC+ = 3.3 V, T = 25 °C | 5 |
| Input offset voltage | Vio | | | 8 | μV | VCC+ = 3.3 V, -40 °C < T < 125 °C | 5 |
| Input offset voltage drift | ΔVio/ΔT | | 10 | 30 | nV/°C | VCC+ = 3.3 V, -40 °C < T < 125 °C | 5 |
| Input bias current | Iib | | 60 | 200 | pA | VCC+ = 3.3 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 5 |
| Input offset current | Iio | | 120 | 400 | pA | VCC+ = 3.3 V, Vout = VCC/2, T = 25 °C, guaranteed by design | 5 |
| Common mode rejection ratio | CMR | 115 | 128 | | dB | VCC+ = 3.3 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 5 |
| Large signal voltage gain | Avd | 118 | 135 | | dB | VCC+ = 3.3 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C | 5 |
| High-level output voltage | VOH | | | 30 | mV | VCC+ = 3.3 V, T = 25 °C | 5 |
| Low-level output voltage | VOL | | | 30 | mV | VCC+ = 3.3 V, T = 25 °C | 5 |
| Output sink current | Isink | 15 | 18 | | mA | VCC+ = 3.3 V, Vout = VCC, T = 25 °C | 5 |
| Output source current | Isource | 14 | 16 | | mA | VCC+ = 3.3 V, Vout = 0 V, T = 25 °C | 5 |
| Supply current (per amplifier) | ICC | | 29 | 40 | μA | VCC+ = 3.3 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | The copper traces that connect the output pins to the load and supply pins should be as wide as possible to | 17 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TSZ121ILT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tsz121ilt-etched.step` / `tsz121ilt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tsz121ilt.step` / `tsz121ilt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/tsz121ilt.pdf) (37 pp, sha256 `4a57160e181dd503`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tsz121ilt-datasheet.pdf)