main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tsz121ilt: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tsz121ilt-etched.glb tsz121ilt: factory component page (tier=mfr) · Ray
tsz121ilt-etched.step tsz121ilt: factory component page (tier=mfr) · Ray
tsz121ilt-hero.glb tsz121ilt: hero GLB from the etched model (keeps the MPN mark) · Ray
tsz121ilt-hero.overlay.json tsz121ilt: hero GLB from the etched model (keeps the MPN mark) · Ray
tsz121ilt.glb Publish 0.1.0 · Ray
tsz121ilt.kicad_mod Publish 0.1.0 · Ray
tsz121ilt.kicad_sym Publish 0.1.0 · Ray
tsz121ilt.lbr Publish 0.1.0 · Ray
tsz121ilt.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TSZ121ILT

STMicroelectronics · Precision OpAmps · SOT-23-5

TSZ121ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT output Rail-to-rail amplifier output that swings to within 30 mV of either supply rail at 25 °C with a 10 kΩ load.
2 VCC- power_in Negative supply (ground in single-supply use); supply span VCC is 1.8 V to 5.5 V.
3 IN+ input Non-inverting input with rail-to-rail common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor.
4 IN- input Inverting input with rail-to-rail common-mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; limit input current to 10 mA with a series resistor.
5 VCC+ power_in Positive supply, 1.8 V to 5.5 V (absolute maximum 6 V); a 0.1 µF decoupling capacitor close to the pin is strongly recommended.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 3
Input current Iin 10 mA must be limited by series resistor 3
Storage temperature Tstg -65 150 °C 3
Maximum junction temperature Tj 150 °C 3
ESD HBM ESD 4 kV human body model 3
ESD MM ESD 300 V machine model 3
ESD CDM ESD 1.5 kV charged device model 3
Latch-up immunity 200 mA 3
Supply voltage VCC 1.8 5.5 V 3
Operating free air temperature range Toper -40 125 °C 3
Thermal resistance junction to ambient, SOT23-5 Rthja 250 °C/W SOT23-5, typical value 3
Input offset voltage Vio 1 5 μV VCC+ = 5 V, T = 25 °C 6
Input offset voltage Vio 8 μV VCC+ = 5 V, -40 °C < T < 125 °C 6
Input offset voltage drift ΔVio/ΔT 10 30 nV/°C VCC+ = 5 V, -40 °C < T < 125 °C 6
Input bias current Iib 70 200 pA VCC+ = 5 V, Vout = VCC/2, T = 25 °C, guaranteed by design 6
Input bias current Iib 300 pA VCC+ = 5 V, Vout = VCC/2, -40 °C < T < 125 °C, guaranteed by design 6
Input offset current Iio 140 400 pA VCC+ = 5 V, Vout = VCC/2, T = 25 °C, guaranteed by design 6
Input offset current Iio 600 pA VCC+ = 5 V, Vout = VCC/2, -40 °C < T < 125 °C, guaranteed by design 6
Common mode rejection ratio CMR 115 136 dB VCC+ = 5 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 6
Common mode rejection ratio CMR 115 dB VCC+ = 5 V, -40 °C < T < 125 °C 6
Supply voltage rejection ratio SVR 120 140 dB VCC = 1.8 V to 5.5 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 6
Supply voltage rejection ratio SVR 120 dB VCC = 1.8 V to 5.5 V, -40 °C < T < 125 °C 6
Large signal voltage gain Avd 120 135 dB VCC+ = 5 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C 6
Large signal voltage gain Avd 110 dB VCC+ = 5 V, -40 °C < T < 125 °C 6
High-level output voltage VOH 30 mV VCC+ = 5 V, T = 25 °C 6
High-level output voltage VOH 70 mV VCC+ = 5 V, -40 °C < T < 125 °C 6
Low-level output voltage VOL 30 mV VCC+ = 5 V, T = 25 °C 6
Low-level output voltage VOL 70 mV VCC+ = 5 V, -40 °C < T < 125 °C 6
Output sink current Isink 15 18 mA VCC+ = 5 V, Vout = VCC, T = 25 °C 6
Output sink current Isink 14 mA VCC+ = 5 V, Vout = VCC, -40 °C < T < 125 °C 6
Output source current Isource 14 17 mA VCC+ = 5 V, Vout = 0 V, T = 25 °C 6
Output source current Isource 12 mA VCC+ = 5 V, Vout = 0 V, -40 °C < T < 125 °C 6
Supply current (per amplifier) ICC 31 40 μA VCC+ = 5 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 6
Supply current (per amplifier) ICC 40 μA VCC+ = 5 V, Vout = VCC/2, RL > 1 MΩ, -40 °C < T < 125 °C 6
Input offset voltage Vio 1 5 μV VCC+ = 1.8 V, T = 25 °C 4
Input offset voltage Vio 8 μV VCC+ = 1.8 V, -40 °C < T < 125 °C 4
Input offset voltage drift ΔVio/ΔT 10 30 nV/°C VCC+ = 1.8 V, -40 °C < T < 125 °C 4
Input bias current Iib 50 200 pA VCC+ = 1.8 V, Vout = VCC/2, T = 25 °C, guaranteed by design 4
Input offset current Iio 100 400 pA VCC+ = 1.8 V, Vout = VCC/2, T = 25 °C, guaranteed by design 4
Common mode rejection ratio CMR 110 122 dB VCC+ = 1.8 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 4
Large signal voltage gain Avd 118 135 dB VCC+ = 1.8 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C 4
High-level output voltage VOH 30 mV VCC+ = 1.8 V, T = 25 °C 4
Low-level output voltage VOL 30 mV VCC+ = 1.8 V, T = 25 °C 4
Output sink current Isink 7 8 mA VCC+ = 1.8 V, Vout = VCC, T = 25 °C 4
Output source current Isource 5 7 mA VCC+ = 1.8 V, Vout = 0 V, T = 25 °C 4
Supply current (per amplifier) ICC 28 40 μA VCC+ = 1.8 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 4
Input offset voltage Vio 1 5 μV VCC+ = 3.3 V, T = 25 °C 5
Input offset voltage Vio 8 μV VCC+ = 3.3 V, -40 °C < T < 125 °C 5
Input offset voltage drift ΔVio/ΔT 10 30 nV/°C VCC+ = 3.3 V, -40 °C < T < 125 °C 5
Input bias current Iib 60 200 pA VCC+ = 3.3 V, Vout = VCC/2, T = 25 °C, guaranteed by design 5
Input offset current Iio 120 400 pA VCC+ = 3.3 V, Vout = VCC/2, T = 25 °C, guaranteed by design 5
Common mode rejection ratio CMR 115 128 dB VCC+ = 3.3 V, Vic = 0 V to VCC, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 5
Large signal voltage gain Avd 118 135 dB VCC+ = 3.3 V, Vout = 0.5 V to (VCC - 0.5 V), T = 25 °C 5
High-level output voltage VOH 30 mV VCC+ = 3.3 V, T = 25 °C 5
Low-level output voltage VOL 30 mV VCC+ = 3.3 V, T = 25 °C 5
Output sink current Isink 15 18 mA VCC+ = 3.3 V, Vout = VCC, T = 25 °C 5
Output source current Isource 14 16 mA VCC+ = 3.3 V, Vout = 0 V, T = 25 °C 5
Supply current (per amplifier) ICC 29 40 μA VCC+ = 3.3 V, Vout = VCC/2, RL > 1 MΩ, T = 25 °C 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The copper traces that connect the output pins to the load and supply pins should be as wide as possible to 17

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TSZ121ILT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tsz121ilt-etched.step / tsz121ilt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsz121ilt.step / tsz121ilt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (37 pp, sha256 4a57160e181dd503, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF