TSU111HYLT

{
  "slug": "tsu111hylt",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tsu111hylt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tsu111hylt.kicad_sym",
    "tsu111hylt.kicad_mod",
    "tsu111hylt.glb",
    "tsu111hylt.step",
    "tsu111hylt.lbr",
    "docs/hero.png",
    "docs/tsu111hylt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tsu111hylt-hero.glb",
    "tsu111hylt-hero.overlay.json"
  ],
  "component": {
    "mpn": "TSU111HYLT",
    "manufacturer": "STMicroelectronics",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603443875361280000",
    "parts": {
      "symbol": "tsu111hylt.kicad_sym",
      "footprint": "tsu111hylt.kicad_mod",
      "model_3d": "tsu111hylt-hero.glb",
      "model_3d_plain": "tsu111hylt.glb",
      "model_3d_step": "tsu111hylt-etched.step",
      "model_3d_step_plain": "tsu111hylt.step",
      "lbr": "tsu111hylt.lbr"
    },
    "distributor_links": {
      "lcsc": "C20033935",
      "digikey": "497-TSU111HYLTTR-ND",
      "mouser": "511-TSU111HYLT"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T23:40:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-TSU111HYLTTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-TSU111HYLT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting input channel; the common-mode input range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V, and the input current must be limited by a series resistor."
      },
      {
        "number": "2",
        "name": "VCC-",
        "type": "power_in",
        "description": "Negative supply voltage; the device operates with VCC+ from 1.5 V to 5.5 V above VCC- (specified with VCC- = 0 V)."
      },
      {
        "number": "3",
        "name": "IN-",
        "type": "input",
        "description": "Inverting input channel; the input voltage must stay within (VCC-) - 0.2 V to (VCC+) + 0.2 V and the input current must be limited by a series resistor."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "output",
        "description": "Output channel; the output swings close to both rails, and the output must not be shorted because short-circuits can cause excessive heating and destructive dissipation."
      },
      {
        "number": "5",
        "name": "VCC+",
        "type": "power_in",
        "description": "Positive supply voltage; the absolute maximum supply voltage is 6 V and the recommended operating range is 1.5 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: TSU111HYLT is listed in Table 8 as SOT23-5 (SOT23-5L), so the SOT-23-5 pinout from Table 1 and Figur; The OUT pin description has no explicit output current limit for pin 4 itself; the datasheet only st"
        ],
        "pages_sent": 31,
        "cost_usd": 0.0785,
        "at": "2026-10-07T23:40:26"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603443875361280000",
        "pages": 31,
        "sha256": "c14a4afc63086127",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tsu111hylt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tsu111hylt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4e666655fdcbbd60ef8cf86b19d0fe3e099d7214043e4279d1960b71eb9c32d3",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}