component
TSU111HYLT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTSU111HYLT
STMicroelectronics · Operational Amplifier · SOT-23-5
TSU111HYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Non-inverting input channel; the common-mode input range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V, and the input current must be limited by a series resistor. |
| 2 | VCC- | power_in | Negative supply voltage; the device operates with VCC+ from 1.5 V to 5.5 V above VCC- (specified with VCC- = 0 V). |
| 3 | IN- | input | Inverting input channel; the input voltage must stay within (VCC-) - 0.2 V to (VCC+) + 0.2 V and the input current must be limited by a series resistor. |
| 4 | OUT | output | Output channel; the output swings close to both rails, and the output must not be shorted because short-circuits can cause excessive heating and destructive dissipation. |
| 5 | VCC+ | power_in | Positive supply voltage; the absolute maximum supply voltage is 6 V and the recommended operating range is 1.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TSU111HYLT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tsu111hylt-etched.step/tsu111hylt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsu111hylt.step/tsu111hylt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (31 pp, sha256
c14a4afc63086127, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).