main
Ray Publish 0.1.0 7a4dd10
{
  "slug": "tsc2046ipw",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Touch Screen Controllers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "tsc2046ipw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tsc2046ipw.kicad_sym",
    "tsc2046ipw.kicad_mod",
    "tsc2046ipw.glb",
    "tsc2046ipw.step",
    "tsc2046ipw.lbr",
    "docs/hero.png",
    "docs/tsc2046ipw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tsc2046ipw-hero.glb",
    "tsc2046ipw-hero.overlay.json",
    "tsc2046ipw-etched.glb"
  ],
  "component": {
    "mpn": "TSC2046IPW",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Data Acquisition",
    "subcategory": "Touch Screen Controllers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tsc2046.pdf",
    "parts": {
      "symbol": "tsc2046ipw.kicad_sym",
      "footprint": "tsc2046ipw.kicad_mod",
      "model_3d": "tsc2046ipw-hero.glb",
      "model_3d_plain": "tsc2046ipw-etched.glb",
      "model_3d_step": "tsc2046ipw-etched.step",
      "model_3d_step_plain": "tsc2046ipw.step",
      "lbr": "tsc2046ipw.lbr"
    },
    "distributor_links": {
      "lcsc": "C1521448",
      "mouser": "595-TSC2046IPW"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T10:43:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 875 calls left today"
      },
      "mouser": {
        "pn": "595-TSC2046IPW",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "+VCC",
        "type": "power_in",
        "description": "Analog supply, specified at 2.7V to 3.6V with an operating range of 2.2V to 5.25V, and must be greater than or equal to IOVDD."
      },
      {
        "number": "2",
        "name": "X+",
        "type": "passive",
        "description": "X+ touch-panel connection to the position ADC input and driver switch, with an on-resistance of 5 Ω."
      },
      {
        "number": "3",
        "name": "Y+",
        "type": "passive",
        "description": "Y+ touch-panel connection to the position ADC input and driver switch, with an on-resistance of 5 Ω."
      },
      {
        "number": "4",
        "name": "X−",
        "type": "passive",
        "description": "X− touch-panel connection to the position ADC input and driver switch, with an on-resistance of 6 Ω."
      },
      {
        "number": "5",
        "name": "Y−",
        "type": "passive",
        "description": "Y− touch-panel connection to the position ADC input and driver switch, with an on-resistance of 6 Ω."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device, which should be connected to a clean ground point."
      },
      {
        "number": "7",
        "name": "VBAT",
        "type": "power_in",
        "description": "Battery monitor input for 0V to 6V, divided by 4 before the ADC so that a 5.5V battery reads 1.375V."
      },
      {
        "number": "8",
        "name": "AUX",
        "type": "passive",
        "description": "Auxiliary single-ended analog input to the ADC, with an absolute input range of −0.2V to +VCC + 0.2V."
      },
      {
        "number": "9",
        "name": "VREF",
        "type": "power_in",
        "description": "Reference input/output: the internal 2.5V reference (2.45V to 2.55V) is available here, or an external reference from 1.0V to +VCC can be applied."
      },
      {
        "number": "10",
        "name": "IOVDD",
        "type": "power_in",
        "description": "Digital I/O supply operating from 1.5V to +VCC, and must not exceed +VCC."
      },
      {
        "number": "11",
        "name": "PENIRQ",
        "type": "output",
        "description": "Pen-interrupt output with a nominal 50 kΩ internal pull-up (90 kΩ on the −90 version) that goes low when the screen is touched."
      },
      {
        "number": "12",
        "name": "DOUT",
        "type": "tri_state",
        "description": "Serial data output shifted on the falling edge of DCLK, and high impedance when CS is high."
      },
      {
        "number": "13",
        "name": "BUSY",
        "type": "tri_state",
        "description": "Busy output that is high impedance when CS is high."
      },
      {
        "number": "14",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input latched on the rising edge of DCLK while CS is low; the device ignores DIN until the start bit is detected."
      },
      {
        "number": "15",
        "name": "CS",
        "type": "input",
        "description": "Chip select input that enables the serial I/O register, with CS high placing the ADC in power-down mode."
      },
      {
        "number": "16",
        "name": "DCLK",
        "type": "input",
        "description": "External clock input that runs the SAR conversion process and synchronizes serial data I/O."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The top-view pin configuration drawing on page 5 is scrambled in the text extraction. The TSSOP pin ; Pin types for analog pins (X+, Y+, X−, Y−, VBAT, AUX) are assigned as passive, and VREF as bidirecti; The datasheet gives the TSSOP-16 package for TSC2046IPW (PW, package addendum page 22), so no altern"
        ],
        "pages_sent": 34,
        "cost_usd": 0.1381,
        "at": "2026-11-10T10:43:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tsc2046.pdf",
        "pages": 34,
        "sha256": "88219477cf1d73ae",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tsc2046ipw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tsc2046ipw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "af23a0dbb4f91b4e28e746337dc3f190c758352dfc6c96066fa03eeb77f214db",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PW0016A",
      "source_page": 27,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tsc2046ipw.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}