main
History Download
Ray Publish 0.1.0 e18b848

TSC1031IPT

STMicroelectronics · Current-Sensing Amplifiers · TSSOP-8

TSC1031IPT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vm input Analog input for the external sense resistor, where the measured current exits the shunt on the Vm side; absolute maximum -16 to 75 V with respect to Vcc-.
2 A1 output Analog output connection to the output resistor (Rf3 to Gnd balances the input filter resistors); absolute maximum -0.3 V to Vcc+ + 0.3 V.
3 SEL input Digital gain-select input: Gnd gives 50 V/V and Vcc+ gives 100 V/V, with VIL max 0.5 V and VIH min 1.2 V.
4 Out output Analog output voltage proportional to the sense voltage Vp-Vm, with the voltage buffer capable of ±10 mA and limited to -0.3 V to Vcc+ + 0.3 V.
5 Vcc+ power_in Positive power supply line, 2.7 to 5.5 V in single-supply configuration, absolute maximum 7 V.
6 Gnd power_in Ground line, reference for the Vcc+, SEL, A1 and Out pin voltage limits.
7 Vcc- power_in Negative power supply line, connected to Gnd in single-supply configuration or -8 to 0 V (Vcc+ = 5.5 V max) in dual-supply configuration, with Vcc+ - Vcc- limited to 15 V.
8 Vp input Analog input for the external sense resistor, where the measured current enters the shunt on the Vp side; absolute maximum -16 to 75 V with respect to Vcc-.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Vid Input pins differential voltage (Vp-Vm) Vid -20 20 V 6
Sensing pins input voltages (Vp, Vm) Vin_sense -16 75 V Measured with respect to Vcc- pin 6
Gain selection pin input voltage (SEL) Vin_sel -0.3 V Referred to Gnd; max printed as Vcc+ + 0.3 V 6
A1 pin input voltage Vin_A1 -0.3 V Referred to Gnd; max printed as Vcc+ + 0.3 V 6
Positive supply voltage Vcc+ -0.3 7 V Referred to Gnd 6
DC supply voltage (Vcc+ - Vcc-) Vcc+-Vcc- 0 15 V 6
DC output pin voltage Vout -0.3 V Referred to Gnd; max printed as Vcc+ + 0.3 V 6
Storage temperature Tstg -55 150 °C 6
Maximum junction temperature Tj 150 °C 6
TSSOP8 thermal resistance junction to ambient Rthja 120 C/W TSSOP8 package 6
DC supply voltage in single-supply configuration Vcc+ 2.7 5.5 V Vcc- connected to Gnd = 0 V, Tmin to Tmax 6
Negative supply voltage in dual-supply configuration Vcc- -8 0 V Vcc+ = 5.5 V max, Tmin to Tmax 6
Negative supply voltage in dual-supply configuration Vcc- -11 0 V Vcc+ = 3 V max, Tmin to Tmax 6
Common-mode voltage range referred to pin Vcc- Vicm 2.9 70 V Tmin to Tmax 6
Operational temperature range Toper -40 125 °C Tmin to Tmax 6
Total supply current ICC 200 360 μA Vsense = 0 V, Tmin < Tamb < Tmax 7
Total supply current ICC1 300 480 μA Vsense = 50 mV, Av = 50 V/V, Tmin < Tamb < Tmax 7
DC common-mode rejection DC CMR 90 105 dB 2.9 V < Vm < 70 V, Tmin < Tamb < Tmax 7
AC common-mode rejection AC CMR 95 dB Av = 50 V/V or 100 V/V; 2.9 V < Vicm < 30 V, 1 kHz sine wave 7
Supply voltage rejection SVR 85 100 dB Av = 50 V/V, 2.7 V < VCC < 5.5 V, Vsense = 30 mV, Tmin < Tamb < Tmax 7
Input offset voltage Vos -500 500 500 μV Tamb = 25C 7
Input offset voltage Vos -1100 1100 μV Tmin < Tamb < Tmax 7
Input offset drift vs. T dVos/dT -20 5 μV/°C Av = 50 V/V, Tmin < Tamb < Tmax 7
Input leakage current Ilk 1 μA VCC = 0 V, Tmin < Tamb < Tmax 7
Input bias current Iib 10 15 μA Vsense = 0 V, Tmin < Tamb < Tmax 7
Logic low voltage (SEL) VIL -0.3 0.5 V VCCmin < VCC < VCCmax, Tmin < Tamb < Tmax 7
Logic high voltage (SEL) VIH 1.2 VCC Printed as 1.2 VCC; VCCmin < VCC < VCCmax, Tmin < Tamb < Tmax 7
Gain-select pins (SEL) leakage input current Isel 400 nA SEL pin connected to GND or VCC, Tmin < Tamb < Tmax 7
Current multiplier / total gain output drift vs. T Vout/T -240 240 ppm/°C Av = 50 V/V, Tmin < Tamb < Tmax 8
Output stage load regulation Vout/Iout -1.5 0.3 1.5 mV/mA -10 mA < Iout < 10 mA, Av = 50 V/V, Tamb = 25° C 8
Total output voltage accuracy (Vsense = 50 mV) Vout -2.5 2.5 % Vsense = 50 mV, Tamb = 25C; not for Av = 100 V/V 8
Total output voltage accuracy (Vsense = 50 mV) Vout -4 4 % Vsense = 50 mV, Tmin < Tamb < Tmax; not for Av = 100 V/V 8
Total output voltage accuracy (Vsense = 90 mV) Vout -3.5 3.5 % Vsense = 90 mV, Tamb = 25C; not for Av = 100 V/V 8
Total output voltage accuracy (Vsense = 90 mV) Vout -5 5 % Vsense = 90 mV, Tmin < Tamb < Tmax; not for Av = 100 V/V 8
Total output voltage accuracy (Vsense = 20 mV) Vout -3.5 3.5 % Vsense = 20 mV, Tamb = 25C 8
Total output voltage accuracy (Vsense = 20 mV) Vout -5 5 % Vsense = 20 mV, Tmin < Tamb < Tmax 8
Total output voltage accuracy (Vsense = 10 mV) Vout -5.5 5.5 % Vsense = 10 mV, Tamb = 25C 8
Total output voltage accuracy (Vsense = 10 mV) Vout -8 8 % Vsense = 10 mV, Tmin < Tamb < Tmax 8
Total output voltage accuracy (Vsense = 5 mV) Vout -10 10 % Vsense = 5 mV, Tamb = 25C 8
Total output voltage accuracy (Vsense = 5 mV) Vout -22 22 % Vsense = 5 mV, Tmin < Tamb < Tmax 8
Short-circuit current Isc 15 26 mA OUT connected to VCC or GND 8
Output stage high-state saturation voltage VOH 85 135 mV VOH = VCC-Vout; Vsense = 1 V, Iout = 1 mA 8
Output stage low-state saturation voltage VOL 80 125 mV Vsense = -1 V, Iout = 1 mA 8
Slew rate SR 0.4 0.6 V/μs Vsense = 10 mV to 100 mV 9

CAD (KiCad official)

  • Symbol: TSC1031IPT
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: tsc1031ipt-etched.step / tsc1031ipt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsc1031ipt.step / tsc1031ipt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (26 pp, sha256 a95dbff886269326, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF