3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSC1031IPT
STMicroelectronics · Current-Sensing Amplifiers · TSSOP-8
TSC1031IPT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vm | input | Analog input for the external sense resistor, where the measured current exits the shunt on the Vm side; absolute maximum -16 to 75 V with respect to Vcc-. |
| 2 | A1 | output | Analog output connection to the output resistor (Rf3 to Gnd balances the input filter resistors); absolute maximum -0.3 V to Vcc+ + 0.3 V. |
| 3 | SEL | input | Digital gain-select input: Gnd gives 50 V/V and Vcc+ gives 100 V/V, with VIL max 0.5 V and VIH min 1.2 V. |
| 4 | Out | output | Analog output voltage proportional to the sense voltage Vp-Vm, with the voltage buffer capable of ±10 mA and limited to -0.3 V to Vcc+ + 0.3 V. |
| 5 | Vcc+ | power_in | Positive power supply line, 2.7 to 5.5 V in single-supply configuration, absolute maximum 7 V. |
| 6 | Gnd | power_in | Ground line, reference for the Vcc+, SEL, A1 and Out pin voltage limits. |
| 7 | Vcc- | power_in | Negative power supply line, connected to Gnd in single-supply configuration or -8 to 0 V (Vcc+ = 5.5 V max) in dual-supply configuration, with Vcc+ - Vcc- limited to 15 V. |
| 8 | Vp | input | Analog input for the external sense resistor, where the measured current enters the shunt on the Vp side; absolute maximum -16 to 75 V with respect to Vcc-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Vid Input pins differential voltage (Vp-Vm) | Vid | -20 | 20 | V | 6 | ||
| Sensing pins input voltages (Vp, Vm) | Vin_sense | -16 | 75 | V | Measured with respect to Vcc- pin | 6 | |
| Gain selection pin input voltage (SEL) | Vin_sel | -0.3 | V | Referred to Gnd; max printed as Vcc+ + 0.3 V | 6 | ||
| A1 pin input voltage | Vin_A1 | -0.3 | V | Referred to Gnd; max printed as Vcc+ + 0.3 V | 6 | ||
| Positive supply voltage | Vcc+ | -0.3 | 7 | V | Referred to Gnd | 6 | |
| DC supply voltage (Vcc+ - Vcc-) | Vcc+-Vcc- | 0 | 15 | V | 6 | ||
| DC output pin voltage | Vout | -0.3 | V | Referred to Gnd; max printed as Vcc+ + 0.3 V | 6 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 6 | ||
| Maximum junction temperature | Tj | 150 | °C | 6 | |||
| TSSOP8 thermal resistance junction to ambient | Rthja | 120 | C/W | TSSOP8 package | 6 | ||
| DC supply voltage in single-supply configuration | Vcc+ | 2.7 | 5.5 | V | Vcc- connected to Gnd = 0 V, Tmin to Tmax | 6 | |
| Negative supply voltage in dual-supply configuration | Vcc- | -8 | 0 | V | Vcc+ = 5.5 V max, Tmin to Tmax | 6 | |
| Negative supply voltage in dual-supply configuration | Vcc- | -11 | 0 | V | Vcc+ = 3 V max, Tmin to Tmax | 6 | |
| Common-mode voltage range referred to pin Vcc- | Vicm | 2.9 | 70 | V | Tmin to Tmax | 6 | |
| Operational temperature range | Toper | -40 | 125 | °C | Tmin to Tmax | 6 | |
| Total supply current | ICC | 200 | 360 | μA | Vsense = 0 V, Tmin < Tamb < Tmax | 7 | |
| Total supply current | ICC1 | 300 | 480 | μA | Vsense = 50 mV, Av = 50 V/V, Tmin < Tamb < Tmax | 7 | |
| DC common-mode rejection | DC CMR | 90 | 105 | dB | 2.9 V < Vm < 70 V, Tmin < Tamb < Tmax | 7 | |
| AC common-mode rejection | AC CMR | 95 | dB | Av = 50 V/V or 100 V/V; 2.9 V < Vicm < 30 V, 1 kHz sine wave | 7 | ||
| Supply voltage rejection | SVR | 85 | 100 | dB | Av = 50 V/V, 2.7 V < VCC < 5.5 V, Vsense = 30 mV, Tmin < Tamb < Tmax | 7 | |
| Input offset voltage | Vos | -500 | 500 | 500 | μV | Tamb = 25C | 7 |
| Input offset voltage | Vos | -1100 | 1100 | μV | Tmin < Tamb < Tmax | 7 | |
| Input offset drift vs. T | dVos/dT | -20 | 5 | μV/°C | Av = 50 V/V, Tmin < Tamb < Tmax | 7 | |
| Input leakage current | Ilk | 1 | μA | VCC = 0 V, Tmin < Tamb < Tmax | 7 | ||
| Input bias current | Iib | 10 | 15 | μA | Vsense = 0 V, Tmin < Tamb < Tmax | 7 | |
| Logic low voltage (SEL) | VIL | -0.3 | 0.5 | V | VCCmin < VCC < VCCmax, Tmin < Tamb < Tmax | 7 | |
| Logic high voltage (SEL) | VIH | 1.2 | VCC | Printed as 1.2 VCC; VCCmin < VCC < VCCmax, Tmin < Tamb < Tmax | 7 | ||
| Gain-select pins (SEL) leakage input current | Isel | 400 | nA | SEL pin connected to GND or VCC, Tmin < Tamb < Tmax | 7 | ||
| Current multiplier / total gain output drift vs. T | Vout/T | -240 | 240 | ppm/°C | Av = 50 V/V, Tmin < Tamb < Tmax | 8 | |
| Output stage load regulation | Vout/Iout | -1.5 | 0.3 | 1.5 | mV/mA | -10 mA < Iout < 10 mA, Av = 50 V/V, Tamb = 25° C | 8 |
| Total output voltage accuracy (Vsense = 50 mV) | Vout | -2.5 | 2.5 | % | Vsense = 50 mV, Tamb = 25C; not for Av = 100 V/V | 8 | |
| Total output voltage accuracy (Vsense = 50 mV) | Vout | -4 | 4 | % | Vsense = 50 mV, Tmin < Tamb < Tmax; not for Av = 100 V/V | 8 | |
| Total output voltage accuracy (Vsense = 90 mV) | Vout | -3.5 | 3.5 | % | Vsense = 90 mV, Tamb = 25C; not for Av = 100 V/V | 8 | |
| Total output voltage accuracy (Vsense = 90 mV) | Vout | -5 | 5 | % | Vsense = 90 mV, Tmin < Tamb < Tmax; not for Av = 100 V/V | 8 | |
| Total output voltage accuracy (Vsense = 20 mV) | Vout | -3.5 | 3.5 | % | Vsense = 20 mV, Tamb = 25C | 8 | |
| Total output voltage accuracy (Vsense = 20 mV) | Vout | -5 | 5 | % | Vsense = 20 mV, Tmin < Tamb < Tmax | 8 | |
| Total output voltage accuracy (Vsense = 10 mV) | Vout | -5.5 | 5.5 | % | Vsense = 10 mV, Tamb = 25C | 8 | |
| Total output voltage accuracy (Vsense = 10 mV) | Vout | -8 | 8 | % | Vsense = 10 mV, Tmin < Tamb < Tmax | 8 | |
| Total output voltage accuracy (Vsense = 5 mV) | Vout | -10 | 10 | % | Vsense = 5 mV, Tamb = 25C | 8 | |
| Total output voltage accuracy (Vsense = 5 mV) | Vout | -22 | 22 | % | Vsense = 5 mV, Tmin < Tamb < Tmax | 8 | |
| Short-circuit current | Isc | 15 | 26 | mA | OUT connected to VCC or GND | 8 | |
| Output stage high-state saturation voltage | VOH | 85 | 135 | mV | VOH = VCC-Vout; Vsense = 1 V, Iout = 1 mA | 8 | |
| Output stage low-state saturation voltage | VOL | 80 | 125 | mV | Vsense = -1 V, Iout = 1 mA | 8 | |
| Slew rate | SR | 0.4 | 0.6 | V/μs | Vsense = 10 mV to 100 mV | 9 |
CAD (KiCad official)
- Symbol:
TSC1031IPT - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tsc1031ipt-etched.step/tsc1031ipt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsc1031ipt.step/tsc1031ipt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (26 pp, sha256
a95dbff886269326, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).