main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ts9511ilt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ts9511ilt: viewers · Ray
package.json ts9511ilt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
page.json ts9511ilt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
README.md Initial commit: component/ts9511ilt · Ray
ts9511ilt-etched.fit.json ts9511ilt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ts9511ilt-etched.glb ts9511ilt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
ts9511ilt-etched.step ts9511ilt: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
ts9511ilt.glb Publish 0.1.0 · Ray
ts9511ilt.kicad_mod Publish 0.1.0 · Ray
ts9511ilt.kicad_sym Publish 0.1.0 · Ray
ts9511ilt.lbr Publish 0.1.0 · Ray
ts9511ilt.step Publish 0.1.0 · Ray

TS9511ILT

STMicroelectronics · Precision Op Amps · SOT-23-5

TS9511ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; high-level output voltage typically VCC-0.2V and low-level output voltage typically 80 mV above VDD into a 600 Ω load, with a 10/20 mA typical/max short-circuit current.
2 VCC- power_in Negative supply (VDD) pin; all voltages are referenced to this network ground terminal, with input voltage limited to VDD-0.3V to VCC+0.3V.
3 IN+ input Non-inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed ±1V without a series limiting resistor.
4 IN- input Inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed ±1V without a series limiting resistor.
5 VCC+ power_in Positive supply pin; operating supply voltage range is 2.7 V to 12 V, with an absolute maximum rating of 14 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

CAD (KiCad official)

  • Symbol: TS9511ILT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ts9511ilt-etched.step / ts9511ilt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ts9511ilt.step / ts9511ilt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (11 pp, sha256 335dcfc50c3ea30a, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF