component
TS9511ILT
Public Made by Adomby adom
STMicroelectronics Precision Op Amps, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTS9511ILT
STMicroelectronics · Precision Op Amps · SOT-23-5
TS9511ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; high-level output voltage typically VCC-0.2V and low-level output voltage typically 80 mV above VDD into a 600 Ω load, with a 10/20 mA typical/max short-circuit current. |
| 2 | VCC- | power_in | Negative supply (VDD) pin; all voltages are referenced to this network ground terminal, with input voltage limited to VDD-0.3V to VCC+0.3V. |
| 3 | IN+ | input | Non-inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed ±1V without a series limiting resistor. |
| 4 | IN- | input | Inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed ±1V without a series limiting resistor. |
| 5 | VCC+ | power_in | Positive supply pin; operating supply voltage range is 2.7 V to 12 V, with an absolute maximum rating of 14 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TS9511ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ts9511ilt-etched.step/ts9511ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts9511ilt.step/ts9511ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (11 pp, sha256
335dcfc50c3ea30a, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).