← Commit history

ts9511ilt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·2ddac92101 · ·parent b55b203
2 files changed +87−7
package.json+45−5
@@ -53,7 +53,7 @@         "number": "1",         "name": "OUT",         "type": "output",-        "description": "Amplifier output; high-level output voltage typically VCC-0.2V and low-level output voltage typically 80 mV above VDD into a 600 \u03a9 load, with a 10/20 mA typical/max short-circuit current."+        "description": "Amplifier output; high-level output voltage typically VCC-0.2V and low-level output voltage typically 80 mV above VDD into a 600 Ω load, with a 10/20 mA typical/max short-circuit current."       },       {         "number": "2",@@ -65,13 +65,13 @@         "number": "3",         "name": "IN+",         "type": "input",-        "description": "Non-inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed \u00b11V without a series limiting resistor."+        "description": "Non-inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed ±1V without a series limiting resistor."       },       {         "number": "4",         "name": "IN-",         "type": "input",-        "description": "Inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed \u00b11V without a series limiting resistor."+        "description": "Inverting input; common-mode input voltage range is VDD-0.2V to VCC+0.2V and differential input voltage must not exceed ±1V without a series limiting resistor."       },       {         "number": "5",@@ -114,6 +114,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ts9511ilt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ts9511ilt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a2626017b7e5609da61dec28baa4d4d7da826c633731176619392930075ef7c6",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -99,7 +99,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ts9511ilt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ts9511ilt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a2626017b7e5609da61dec28baa4d4d7da826c633731176619392930075ef7c6",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -147,4 +187,4 @@     "public": true   },   "updated_at": "2026-09-25T13:07:15.042Z"-}\ No newline at end of file+}