# TS5A22364QDGSRQ1

**Texas Instruments** · Analog Switches, Multiplexers · VSSOP-10-0.5mm

TS5A22364QDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply power for the device, operating from a single 2.3 V to 5.5 V supply; it must be powered before a voltage is applied to the NC and NO signal paths. |
| 2 | NO1 | bidirectional | Normally open (NO) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions. |
| 3 | COM1 | bidirectional | Common signal path of switch 1, connected to NO1 or NC1 depending on the IN1 logic level; signal voltage must stay between VCC - 5.5 V and VCC. |
| 4 | NC1 | unconnected | Normally closed (NC) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM1 when IN1 is low. |
| 5 | IN1 | input | Digital control pin that selects COM1 to NC1 when low and COM1 to NO1 when high; it must be held between GND and VCC and should not be left floating. |
| 6 | GND | power_in | Ground reference for the device; digital control inputs and signal voltages are referenced to ground. |
| 7 | IN2 | input | Digital control pin that selects COM2 to NC2 when low and COM2 to NO2 when high; it must be held between GND and VCC and should not be left floating. |
| 8 | NC2 | unconnected | Normally closed (NC) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM2 when IN2 is low. |
| 9 | COM2 | bidirectional | Common signal path of switch 2, connected to NO2 or NC2 depending on the IN2 logic level; signal voltage must stay between VCC - 5.5 V and VCC. |
| 10 | NO2 | bidirectional | Normally open (NO) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Interface |
| Pins | 10 |

## CAD (KiCad official)

- Symbol: `TS5A22364QDGSRQ1`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files: `ts5a22364qdgsrq1-etched.step` / `ts5a22364qdgsrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts5a22364qdgsrq1.step` / `ts5a22364qdgsrq1.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ts5a22364-q1) (29 pp, sha256 `86766e8392c67e3c`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ts5a22364qdgsrq1-datasheet.pdf)