component
TS5A22364QDGSRQ1
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+47@@ -0,0 +1,47 @@+# TS5A22364QDGSRQ1++**Texas Instruments** · Analog Switches, Multiplexers · VSSOP-10-0.5mm++TS5A22364QDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | Supply power for the device, operating from a single 2.3 V to 5.5 V supply; it must be powered before a voltage is applied to the NC and NO signal paths. |+| 2 | NO1 | bidirectional | Normally open (NO) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions. |+| 3 | COM1 | bidirectional | Common signal path of switch 1, connected to NO1 or NC1 depending on the IN1 logic level; signal voltage must stay between VCC - 5.5 V and VCC. |+| 4 | NC1 | unconnected | Normally closed (NC) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM1 when IN1 is low. |+| 5 | IN1 | input | Digital control pin that selects COM1 to NC1 when low and COM1 to NO1 when high; it must be held between GND and VCC and should not be left floating. |+| 6 | GND | power_in | Ground reference for the device; digital control inputs and signal voltages are referenced to ground. |+| 7 | IN2 | input | Digital control pin that selects COM2 to NC2 when low and COM2 to NO2 when high; it must be held between GND and VCC and should not be left floating. |+| 8 | NC2 | unconnected | Normally closed (NC) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM2 when IN2 is low. |+| 9 | COM2 | bidirectional | Common signal path of switch 2, connected to NO2 or NC2 depending on the IN2 logic level; signal voltage must stay between VCC - 5.5 V and VCC. |+| 10 | NO2 | bidirectional | Normally open (NO) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Interface |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `TS5A22364QDGSRQ1`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `ts5a22364qdgsrq1-etched.step` / `ts5a22364qdgsrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ts5a22364qdgsrq1.step` / `ts5a22364qdgsrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ts5a22364-q1) (29 pp, sha256 `86766e8392c67e3c`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ts5a22364qdgsrq1-datasheet.pdf)
page.jsonadded+212@@ -0,0 +1,212 @@+{+ "slug": "ts5a22364qdgsrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches, Multiplexers, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "ts5a22364qdgsrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ts5a22364qdgsrq1.kicad_sym",+ "ts5a22364qdgsrq1.kicad_mod",+ "ts5a22364qdgsrq1.glb",+ "ts5a22364qdgsrq1.step",+ "ts5a22364qdgsrq1.lbr",+ "docs/hero.png",+ "docs/ts5a22364qdgsrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ts5a22364qdgsrq1-hero.glb",+ "ts5a22364qdgsrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TS5A22364QDGSRQ1",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Interface",+ "subcategory": "Analog Switches, Multiplexers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ts5a22364-q1",+ "parts": {+ "symbol": "ts5a22364qdgsrq1.kicad_sym",+ "footprint": "ts5a22364qdgsrq1.kicad_mod",+ "model_3d": "ts5a22364qdgsrq1-hero.glb",+ "model_3d_plain": "ts5a22364qdgsrq1.glb",+ "model_3d_step": "ts5a22364qdgsrq1-etched.step",+ "model_3d_step_plain": "ts5a22364qdgsrq1.step",+ "lbr": "ts5a22364qdgsrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C125953",+ "digikey": "296-44605-2-ND",+ "mouser": "595-TS5A22364QDGSRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T20:28:56Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-44605-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TS5A22364QDGSRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply power for the device, operating from a single 2.3 V to 5.5 V supply; it must be powered before a voltage is applied to the NC and NO signal paths."+ },+ {+ "number": "2",+ "name": "NO1",+ "type": "bidirectional",+ "description": "Normally open (NO) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions."+ },+ {+ "number": "3",+ "name": "COM1",+ "type": "bidirectional",+ "description": "Common signal path of switch 1, connected to NO1 or NC1 depending on the IN1 logic level; signal voltage must stay between VCC - 5.5 V and VCC."+ },+ {+ "number": "4",+ "name": "NC1",+ "type": "unconnected",+ "description": "Normally closed (NC) signal path of switch 1; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM1 when IN1 is low."+ },+ {+ "number": "5",+ "name": "IN1",+ "type": "input",+ "description": "Digital control pin that selects COM1 to NC1 when low and COM1 to NO1 when high; it must be held between GND and VCC and should not be left floating."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device; digital control inputs and signal voltages are referenced to ground."+ },+ {+ "number": "7",+ "name": "IN2",+ "type": "input",+ "description": "Digital control pin that selects COM2 to NC2 when low and COM2 to NO2 when high; it must be held between GND and VCC and should not be left floating."+ },+ {+ "number": "8",+ "name": "NC2",+ "type": "unconnected",+ "description": "Normally closed (NC) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC, and it is connected to COM2 when IN2 is low."+ },+ {+ "number": "9",+ "name": "COM2",+ "type": "bidirectional",+ "description": "Common signal path of switch 2, connected to NO2 or NC2 depending on the IN2 logic level; signal voltage must stay between VCC - 5.5 V and VCC."+ },+ {+ "number": "10",+ "name": "NO2",+ "type": "bidirectional",+ "description": "Normally open (NO) signal path of switch 2; signal voltage must stay between VCC - 5.5 V and VCC per the recommended operating conditions."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers and names are taken from the Pin Configuration (top view) and Pin Functions table on pag"+ ],+ "pages_sent": 29,+ "cost_usd": 0.1091,+ "at": "2026-10-08T20:28:17"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ts5a22364-q1",+ "pages": 29,+ "sha256": "86766e8392c67e3c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ts5a22364qdgsrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ts5a22364qdgsrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "8e2c210fbf4b51911966bb2e64a5bfee52c51e64ea5fe488ad74566471ff6e5c",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}