main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ts1871aiylt: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ts1871aiylt-etched.glb Publish 0.1.0 · Ray
ts1871aiylt-etched.step ts1871aiylt: factory component page (tier=mfr) · Ray
ts1871aiylt-hero.glb ts1871aiylt: hero GLB from the etched model (keeps the MPN mark) · Ray
ts1871aiylt-hero.overlay.json Publish 0.1.0 · Ray
ts1871aiylt.glb Publish 0.1.0 · Ray
ts1871aiylt.kicad_mod Publish 0.1.0 · Ray
ts1871aiylt.kicad_sym Publish 0.1.0 · Ray
ts1871aiylt.lbr Publish 0.1.0 · Ray
ts1871aiylt.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TS1871AIYLT

STMicroelectronics · Operational Amplifier · SOT-23-5

TS1871AIYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out output Amplifier output, rail-to-rail, with output swing within 100 mV of each rail at 600 Ω load and typical 65 mA drive capability.
2 VCC- power_in Negative supply (ground in single-supply use); operating supply range VCC is 1.8 to 6 V, absolute maximum 7 V.
3 In+ input Non-inverting input, rail-to-rail with common-mode range of VCC- - 0.2 V to VCC+ + 0.2 V at 25 °C.
4 In- input Inverting input, rail-to-rail with differential input voltage limited to ±1 V (limit input current to ±1 mA above that).
5 VCC+ power_in Positive supply; operating range VCC is 1.8 to 6 V, absolute maximum 7 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (TS1871A, 25 °C) Vio 0.1 1 mV VCC+=1.8 V, VCC-=0 V, Tamb=25 °C; Vicm=Vout=VCC/2 5
Input offset voltage (TS1871A, Tmin-Tmax) Vio 1.5 mV VCC+=1.8 V, VCC-=0 V; Vicm=Vout=VCC/2; Tmin≤Tamb≤Tmax 5
Input offset current Iio 3 30 nA VCC+=1.8 V; Vicm=Vout=VCC/2, Tamb=25 °C 5
Input bias current Iib 40 125 nA VCC+=1.8 V; Vicm=Vout=VCC/2, Tamb=25 °C 5
Common mode rejection ratio CMR 55 77 dB VCC+=1.8 V; 20 log (ΔVic/ΔVio); 0 ≤ Vicm ≤ VCC, Vout = VCC/2 5
Large signal voltage gain (RL = 2 kΩ) Avd 77 91 dB VCC+=1.8 V; Vout = 0.5 to 1.3 V; RL = 2 kΩ 5
Large signal voltage gain (RL = 600 Ω) Avd 70 84 dB VCC+=1.8 V; Vout = 0.5 to 1.3 V; RL = 600 Ω 5
High level output voltage (RL = 2 kΩ) VOH 1.65 1.77 V VCC+=1.8 V; Vid = 100 mV; RL = 2 kΩ, Tamb=25 °C 5
High level output voltage (RL = 600 Ω) VOH 1.62 1.74 V VCC+=1.8 V; Vid = 100 mV; RL = 600 Ω, Tamb=25 °C 5
Low level output voltage (RL = 2 kΩ) VOL 30 100 mV VCC+=1.8 V; Vid = -100 mV; RL = 2 kΩ, Tamb=25 °C 5
Low level output voltage (RL = 600 Ω) VOL 46 150 mV VCC+=1.8 V; Vid = -100 mV; RL = 600 Ω, Tamb=25 °C 5
Output source current Io 20 58 mA VCC+=1.8 V; Vid = 100 mV, VO = VCC- 5
Output sink current Io 20 68 mA VCC+=1.8 V; Vid = -100 mV, VO = VCC+ 5
Supply current (per amplifier) ICC 400 560 µA VCC+=1.8 V; Vout = VCC/2; AVCL = 1, no load, Tamb=25 °C 5
Supply current (per amplifier), Tmin-Tmax ICC 600 µA VCC+=1.8 V; Vout = VCC/2; AVCL = 1, no load; Tmin≤Tamb≤Tmax 5
Gain bandwidth product GBP 0.9 1.6 MHz VCC+=1.8 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz 5
Slew rate SR 0.38 0.54 V/µs VCC+=1.8 V; RL = 10 kΩ, CL = 100 pF, AV = 1 5
Input offset voltage (TS1871A, 25 °C) Vio 0.1 1 mV VCC=3 V, VCC-=0 V, Tamb=25 °C; Vicm=Vout=VCC/2 6
Input offset current Iio 3 30 nA VCC=3 V; Vicm=Vout=VCC/2, Tamb=25 °C 6
Input bias current Iib 4 125 nA VCC=3 V; Vicm=Vout=VCC/2, Tamb=25 °C 6
Common mode rejection ratio CMR 60 80 dB VCC=3 V; 20 log (ΔVic/ΔVio); 0 ≤ Vicm ≤ VCC, Vout = VCC/2 6
Large signal voltage gain (RL = 2 kΩ) Avd 80 94 dB VCC=3 V; Vout = 0.5 to 2.5 V; RL = 2 kΩ 6
Large signal voltage gain (RL = 600 Ω) Avd 74 88 dB VCC=3 V; Vout = 0.5 to 2.5 V; RL = 600 Ω 6
High level output voltage (RL = 2 kΩ) VOH 2.82 2.95 V VCC=3 V; Vid = 100 mV; RL = 2 kΩ, Tamb=25 °C 6
High level output voltage (RL = 600 Ω) VOH 2.8 2.95 V VCC=3 V; Vid = 100 mV; RL = 600 Ω, Tamb=25 °C 6
Low level output voltage (RL = 2 kΩ) VOL 39 120 mV VCC=3 V; Vid = -100 mV; RL = 2 kΩ, Tamb=25 °C 6
Low level output voltage (RL = 600 Ω) VOL 58 160 mV VCC=3 V; Vid = -100 mV; RL = 600 Ω, Tamb=25 °C 6
Output source current Io 20 60 mA VCC=3 V; Vid = 100 mV, VO = VCC- 6
Output sink current Io 20 70 mA VCC=3 V; Vid = -100 mV, VO = VCC+ 6
Supply current (per amplifier) ICC 450 650 µA VCC=3 V; Vout = VCC/2; AVCL = 1, no load, Tamb=25 °C 6
Gain bandwidth product GBP 1 1.7 MHz VCC=3 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz 6
Slew rate SR 0.42 0.6 V/µs VCC=3 V; RL = 10 kΩ, CL = 100 pF, AV = 1 6
Input offset voltage (TS1871A, 25 °C) Vio 0.1 1 mV VCC=5 V, VCC-=0 V, Tamb=25 °C; Vicm=Vout=VCC/2 7
Input offset current Iio 3 30 nA VCC=5 V; Vicm=Vout=VCC/2, Tamb=25 °C 7
Input bias current Iib 70 130 nA VCC=5 V; Vicm=Vout=VCC/2, Tamb=25 °C 7
Common mode rejection ratio CMR 65 85 dB VCC=5 V; 20 log (ΔVic/ΔVio); 0 ≤ Vicm ≤ VCC, Vout not equal to VCC/2 7
Supply voltage rejection ratio SVR 70 90 dB 20 log (ΔVcc/ΔVio); VCC = 1.8 to 5 V 7
Large signal voltage gain (RL = 2 kΩ) Avd 83 97 dB VCC=5 V; Vout = 1 to 4 V; RL = 2 kΩ 7
Large signal voltage gain (RL = 600 Ω) Avd 77 91 dB VCC=5 V; Vout = 1 to 4 V; RL = 600 Ω 7
High level output voltage (RL = 2 kΩ) VOH 4.8 4.95 V VCC=5 V; Vid = 100 mV; RL = 2 kΩ, Tamb=25 °C 7
High level output voltage (RL = 600 Ω) VOH 4.75 4.9 V VCC=5 V; Vid = 100 mV; RL = 600 Ω, Tamb=25 °C 7
Low level output voltage (RL = 2 kΩ) VOL 52 130 mV VCC=5 V; Vid = -100 mV; RL = 2 kΩ, Tamb=25 °C 7
Low level output voltage (RL = 600 Ω) VOL 70 188 mV VCC=5 V; Vid = -100 mV; RL = 600 Ω, Tamb=25 °C 7
Output source current Io 20 65 mA VCC=5 V; Vid = 100 mV, VO = VCC- 7
Output sink current Io 20 80 mA VCC=5 V; Vid = -100 mV, VO = VCC+ 7
Supply current (per amplifier) ICC 500 835 µA VCC=5 V; Vout = VCC/2; AVCL = 1, no load, Tamb=25 °C 7
Gain bandwidth product GBP 1 1.8 MHz VCC=5 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz 7
Slew rate SR 0.42 0.6 V/µs VCC=5 V; RL = 10 kΩ, CL = 100 pF, AV = 1 7
Differential input voltage Vid -1 1 V Non-inverting input with respect to inverting input; if /Vid/ > 1 V, input current ≤ ±1 mA 3
Supply voltage VCC 7 V Voltages referenced to network terminal 3
Storage temperature Tstg -65 150 °C 3
Maximum junction temperature Tj 150 °C 3
Thermal resistance junction-to-ambient, SOT23-5 Rthja 250 °C/W SOT23-5 package 3
Thermal resistance junction-to-case, SOT23-5 Rthjc 81 °C/W SOT23-5 package 3
ESD HBM (human body model) ESD HBM 2 kV 100 pF through 1.5 kΩ 3
ESD CDM (charged device model) ESD CDM 1.5 kV All pins 3
Latch-up immunity 200 mA 3
Lead temperature (soldering, 10 sec.) 250 °C 10 s 3
Supply voltage (operating) VCC 1.8 6 V 4
Operating free air temperature range Toper -40 125 °C 4

CAD (KiCad official)

  • Symbol: TS1871AIYLT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ts1871aiylt-etched.step / ts1871aiylt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ts1871aiylt.step / ts1871aiylt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (25 pp, sha256 2d137531056c6560, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF