3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTS1871AIYLT
STMicroelectronics · Operational Amplifier · SOT-23-5
TS1871AIYLT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Amplifier output, rail-to-rail, with output swing within 100 mV of each rail at 600 Ω load and typical 65 mA drive capability. |
| 2 | VCC- | power_in | Negative supply (ground in single-supply use); operating supply range VCC is 1.8 to 6 V, absolute maximum 7 V. |
| 3 | In+ | input | Non-inverting input, rail-to-rail with common-mode range of VCC- - 0.2 V to VCC+ + 0.2 V at 25 °C. |
| 4 | In- | input | Inverting input, rail-to-rail with differential input voltage limited to ±1 V (limit input current to ±1 mA above that). |
| 5 | VCC+ | power_in | Positive supply; operating range VCC is 1.8 to 6 V, absolute maximum 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (TS1871A, 25 °C) | Vio | 0.1 | 1 | mV | VCC+=1.8 V, VCC-=0 V, Tamb=25 °C; Vicm=Vout=VCC/2 | 5 | |
| Input offset voltage (TS1871A, Tmin-Tmax) | Vio | 1.5 | mV | VCC+=1.8 V, VCC-=0 V; Vicm=Vout=VCC/2; Tmin≤Tamb≤Tmax | 5 | ||
| Input offset current | Iio | 3 | 30 | nA | VCC+=1.8 V; Vicm=Vout=VCC/2, Tamb=25 °C | 5 | |
| Input bias current | Iib | 40 | 125 | nA | VCC+=1.8 V; Vicm=Vout=VCC/2, Tamb=25 °C | 5 | |
| Common mode rejection ratio | CMR | 55 | 77 | dB | VCC+=1.8 V; 20 log (ΔVic/ΔVio); 0 ≤ Vicm ≤ VCC, Vout = VCC/2 | 5 | |
| Large signal voltage gain (RL = 2 kΩ) | Avd | 77 | 91 | dB | VCC+=1.8 V; Vout = 0.5 to 1.3 V; RL = 2 kΩ | 5 | |
| Large signal voltage gain (RL = 600 Ω) | Avd | 70 | 84 | dB | VCC+=1.8 V; Vout = 0.5 to 1.3 V; RL = 600 Ω | 5 | |
| High level output voltage (RL = 2 kΩ) | VOH | 1.65 | 1.77 | V | VCC+=1.8 V; Vid = 100 mV; RL = 2 kΩ, Tamb=25 °C | 5 | |
| High level output voltage (RL = 600 Ω) | VOH | 1.62 | 1.74 | V | VCC+=1.8 V; Vid = 100 mV; RL = 600 Ω, Tamb=25 °C | 5 | |
| Low level output voltage (RL = 2 kΩ) | VOL | 30 | 100 | mV | VCC+=1.8 V; Vid = -100 mV; RL = 2 kΩ, Tamb=25 °C | 5 | |
| Low level output voltage (RL = 600 Ω) | VOL | 46 | 150 | mV | VCC+=1.8 V; Vid = -100 mV; RL = 600 Ω, Tamb=25 °C | 5 | |
| Output source current | Io | 20 | 58 | mA | VCC+=1.8 V; Vid = 100 mV, VO = VCC- | 5 | |
| Output sink current | Io | 20 | 68 | mA | VCC+=1.8 V; Vid = -100 mV, VO = VCC+ | 5 | |
| Supply current (per amplifier) | ICC | 400 | 560 | µA | VCC+=1.8 V; Vout = VCC/2; AVCL = 1, no load, Tamb=25 °C | 5 | |
| Supply current (per amplifier), Tmin-Tmax | ICC | 600 | µA | VCC+=1.8 V; Vout = VCC/2; AVCL = 1, no load; Tmin≤Tamb≤Tmax | 5 | ||
| Gain bandwidth product | GBP | 0.9 | 1.6 | MHz | VCC+=1.8 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 5 | |
| Slew rate | SR | 0.38 | 0.54 | V/µs | VCC+=1.8 V; RL = 10 kΩ, CL = 100 pF, AV = 1 | 5 | |
| Input offset voltage (TS1871A, 25 °C) | Vio | 0.1 | 1 | mV | VCC=3 V, VCC-=0 V, Tamb=25 °C; Vicm=Vout=VCC/2 | 6 | |
| Input offset current | Iio | 3 | 30 | nA | VCC=3 V; Vicm=Vout=VCC/2, Tamb=25 °C | 6 | |
| Input bias current | Iib | 4 | 125 | nA | VCC=3 V; Vicm=Vout=VCC/2, Tamb=25 °C | 6 | |
| Common mode rejection ratio | CMR | 60 | 80 | dB | VCC=3 V; 20 log (ΔVic/ΔVio); 0 ≤ Vicm ≤ VCC, Vout = VCC/2 | 6 | |
| Large signal voltage gain (RL = 2 kΩ) | Avd | 80 | 94 | dB | VCC=3 V; Vout = 0.5 to 2.5 V; RL = 2 kΩ | 6 | |
| Large signal voltage gain (RL = 600 Ω) | Avd | 74 | 88 | dB | VCC=3 V; Vout = 0.5 to 2.5 V; RL = 600 Ω | 6 | |
| High level output voltage (RL = 2 kΩ) | VOH | 2.82 | 2.95 | V | VCC=3 V; Vid = 100 mV; RL = 2 kΩ, Tamb=25 °C | 6 | |
| High level output voltage (RL = 600 Ω) | VOH | 2.8 | 2.95 | V | VCC=3 V; Vid = 100 mV; RL = 600 Ω, Tamb=25 °C | 6 | |
| Low level output voltage (RL = 2 kΩ) | VOL | 39 | 120 | mV | VCC=3 V; Vid = -100 mV; RL = 2 kΩ, Tamb=25 °C | 6 | |
| Low level output voltage (RL = 600 Ω) | VOL | 58 | 160 | mV | VCC=3 V; Vid = -100 mV; RL = 600 Ω, Tamb=25 °C | 6 | |
| Output source current | Io | 20 | 60 | mA | VCC=3 V; Vid = 100 mV, VO = VCC- | 6 | |
| Output sink current | Io | 20 | 70 | mA | VCC=3 V; Vid = -100 mV, VO = VCC+ | 6 | |
| Supply current (per amplifier) | ICC | 450 | 650 | µA | VCC=3 V; Vout = VCC/2; AVCL = 1, no load, Tamb=25 °C | 6 | |
| Gain bandwidth product | GBP | 1 | 1.7 | MHz | VCC=3 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 6 | |
| Slew rate | SR | 0.42 | 0.6 | V/µs | VCC=3 V; RL = 10 kΩ, CL = 100 pF, AV = 1 | 6 | |
| Input offset voltage (TS1871A, 25 °C) | Vio | 0.1 | 1 | mV | VCC=5 V, VCC-=0 V, Tamb=25 °C; Vicm=Vout=VCC/2 | 7 | |
| Input offset current | Iio | 3 | 30 | nA | VCC=5 V; Vicm=Vout=VCC/2, Tamb=25 °C | 7 | |
| Input bias current | Iib | 70 | 130 | nA | VCC=5 V; Vicm=Vout=VCC/2, Tamb=25 °C | 7 | |
| Common mode rejection ratio | CMR | 65 | 85 | dB | VCC=5 V; 20 log (ΔVic/ΔVio); 0 ≤ Vicm ≤ VCC, Vout not equal to VCC/2 | 7 | |
| Supply voltage rejection ratio | SVR | 70 | 90 | dB | 20 log (ΔVcc/ΔVio); VCC = 1.8 to 5 V | 7 | |
| Large signal voltage gain (RL = 2 kΩ) | Avd | 83 | 97 | dB | VCC=5 V; Vout = 1 to 4 V; RL = 2 kΩ | 7 | |
| Large signal voltage gain (RL = 600 Ω) | Avd | 77 | 91 | dB | VCC=5 V; Vout = 1 to 4 V; RL = 600 Ω | 7 | |
| High level output voltage (RL = 2 kΩ) | VOH | 4.8 | 4.95 | V | VCC=5 V; Vid = 100 mV; RL = 2 kΩ, Tamb=25 °C | 7 | |
| High level output voltage (RL = 600 Ω) | VOH | 4.75 | 4.9 | V | VCC=5 V; Vid = 100 mV; RL = 600 Ω, Tamb=25 °C | 7 | |
| Low level output voltage (RL = 2 kΩ) | VOL | 52 | 130 | mV | VCC=5 V; Vid = -100 mV; RL = 2 kΩ, Tamb=25 °C | 7 | |
| Low level output voltage (RL = 600 Ω) | VOL | 70 | 188 | mV | VCC=5 V; Vid = -100 mV; RL = 600 Ω, Tamb=25 °C | 7 | |
| Output source current | Io | 20 | 65 | mA | VCC=5 V; Vid = 100 mV, VO = VCC- | 7 | |
| Output sink current | Io | 20 | 80 | mA | VCC=5 V; Vid = -100 mV, VO = VCC+ | 7 | |
| Supply current (per amplifier) | ICC | 500 | 835 | µA | VCC=5 V; Vout = VCC/2; AVCL = 1, no load, Tamb=25 °C | 7 | |
| Gain bandwidth product | GBP | 1 | 1.8 | MHz | VCC=5 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 7 | |
| Slew rate | SR | 0.42 | 0.6 | V/µs | VCC=5 V; RL = 10 kΩ, CL = 100 pF, AV = 1 | 7 | |
| Differential input voltage | Vid | -1 | 1 | V | Non-inverting input with respect to inverting input; if /Vid/ > 1 V, input current ≤ ±1 mA | 3 | |
| Supply voltage | VCC | 7 | V | Voltages referenced to network terminal | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Maximum junction temperature | Tj | 150 | °C | 3 | |||
| Thermal resistance junction-to-ambient, SOT23-5 | Rthja | 250 | °C/W | SOT23-5 package | 3 | ||
| Thermal resistance junction-to-case, SOT23-5 | Rthjc | 81 | °C/W | SOT23-5 package | 3 | ||
| ESD HBM (human body model) | ESD HBM | 2 | kV | 100 pF through 1.5 kΩ | 3 | ||
| ESD CDM (charged device model) | ESD CDM | 1.5 | kV | All pins | 3 | ||
| Latch-up immunity | 200 | mA | 3 | ||||
| Lead temperature (soldering, 10 sec.) | 250 | °C | 10 s | 3 | |||
| Supply voltage (operating) | VCC | 1.8 | 6 | V | 4 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 4 |
CAD (KiCad official)
- Symbol:
TS1871AIYLT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ts1871aiylt-etched.step/ts1871aiylt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts1871aiylt.step/ts1871aiylt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (25 pp, sha256
2d137531056c6560, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).