component
TRS213IDBR
Public Made by Adomby adom
Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/trs213idbr
fa00b3a
TRS213IDBR
Texas Instruments · RS232 ICs · SSOP-28-208mil
TRS213IDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DOUT3 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
| 2 | DOUT1 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
| 3 | DOUT2 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
| 4 | RIN2 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 5 | ROUT2 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 6 | DIN2 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 7 | DIN1 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 8 | ROUT1 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 9 | RIN1 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 10 | GND | power_in | Ground reference |
| 11 | VCC | power_in | Supply voltage, 4.5-5.5 V operating range, 14-20 mA typical current |
| 12 | C1+ | passive | Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+ |
| 13 | V+ | power_out | Positive charge-pump output voltage for RS-232 driver supply |
| 14 | C1− | passive | Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND |
| 15 | C2+ | passive | Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+ |
| 16 | C2− | passive | Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND |
| 17 | V− | power_out | Negative charge-pump output voltage for RS-232 driver supply |
| 18 | RIN5 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 19 | ROUT5 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 20 | DIN3 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 21 | DIN4 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 22 | ROUT4 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 23 | RIN4 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 24 | EN | input | Active-high enable control, VIH ≥2.4 V enables outputs, VIL ≤0.8 V disables |
| 25 | SHDN | input | Active-low shutdown control, VIL ≤0.8 V reduces ICC to 15-50 µA |
| 26 | ROUT3 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 27 | RIN3 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 28 | DOUT4 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
TRS213IDBR - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
trs213idbr-etched.step/trs213idbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trs213idbr.step/trs213idbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
6404e251278d0f01, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TRS213IDBR
**Texas Instruments** · RS232 ICs · SSOP-28-208mil
TRS213IDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DOUT3 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
| 2 | DOUT1 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
| 3 | DOUT2 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
| 4 | RIN2 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 5 | ROUT2 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 6 | DIN2 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 7 | DIN1 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 8 | ROUT1 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 9 | RIN1 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 10 | GND | power_in | Ground reference |
| 11 | VCC | power_in | Supply voltage, 4.5-5.5 V operating range, 14-20 mA typical current |
| 12 | C1+ | passive | Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+ |
| 13 | V+ | power_out | Positive charge-pump output voltage for RS-232 driver supply |
| 14 | C1− | passive | Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND |
| 15 | C2+ | passive | Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+ |
| 16 | C2− | passive | Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND |
| 17 | V− | power_out | Negative charge-pump output voltage for RS-232 driver supply |
| 18 | RIN5 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 19 | ROUT5 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 20 | DIN3 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 21 | DIN4 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |
| 22 | ROUT4 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 23 | RIN4 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 24 | EN | input | Active-high enable control, VIH ≥2.4 V enables outputs, VIL ≤0.8 V disables |
| 25 | SHDN | input | Active-low shutdown control, VIL ≤0.8 V reduces ICC to 15-50 µA |
| 26 | ROUT3 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |
| 27 | RIN3 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |
| 28 | DOUT4 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
## CAD (KiCad official)
- Symbol: `TRS213IDBR`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `trs213idbr-etched.step` / `trs213idbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `trs213idbr.step` / `trs213idbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/trs213) (22 pp, sha256 `6404e251278d0f01`, retrieved 2026-09-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/trs213idbr-datasheet.pdf)