← Commit history

Initial commit: component/trs213idbr

Ray ·fa00b3a496 ·
2 files changed +341
README.mdadded+65
@@ -0,0 +1,65 @@+# TRS213IDBR++**Texas Instruments** · RS232 ICs · SSOP-28-208mil++TRS213IDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DOUT3 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |+| 2 | DOUT1 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |+| 3 | DOUT2 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |+| 4 | RIN2 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |+| 5 | ROUT2 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |+| 6 | DIN2 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |+| 7 | DIN1 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |+| 8 | ROUT1 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |+| 9 | RIN1 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |+| 10 | GND | power_in | Ground reference |+| 11 | VCC | power_in | Supply voltage, 4.5-5.5 V operating range, 14-20 mA typical current |+| 12 | C1+ | passive | Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+ |+| 13 | V+ | power_out | Positive charge-pump output voltage for RS-232 driver supply |+| 14 | C1− | passive | Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND |+| 15 | C2+ | passive | Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+ |+| 16 | C2− | passive | Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND |+| 17 | V− | power_out | Negative charge-pump output voltage for RS-232 driver supply |+| 18 | RIN5 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |+| 19 | ROUT5 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |+| 20 | DIN3 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |+| 21 | DIN4 | input | Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V |+| 22 | ROUT4 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |+| 23 | RIN4 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |+| 24 | EN | input | Active-high enable control, VIH ≥2.4 V enables outputs, VIL ≤0.8 V disables |+| 25 | SHDN | input | Active-low shutdown control, VIL ≤0.8 V reduces ICC to 15-50 µA |+| 26 | ROUT3 | output | Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V |+| 27 | RIN3 | input | RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold |+| 28 | DOUT4 | output | RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-28-208mil |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `TRS213IDBR`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `trs213idbr-etched.step` / `trs213idbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `trs213idbr.step` / `trs213idbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/trs213) (22 pp, sha256 `6404e251278d0f01`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/trs213idbr-datasheet.pdf)
page.jsonadded+276
@@ -0,0 +1,276 @@+{+  "slug": "trs213idbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "trs213idbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "trs213idbr.kicad_sym",+    "trs213idbr.kicad_mod",+    "trs213idbr.glb",+    "trs213idbr.step",+    "trs213idbr.lbr",+    "docs/hero.png",+    "docs/trs213idbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TRS213IDBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/trs213",+    "parts": {+      "symbol": "trs213idbr.kicad_sym",+      "footprint": "trs213idbr.kicad_mod",+      "model_3d": "trs213idbr-etched.glb",+      "model_3d_plain": "trs213idbr.glb",+      "model_3d_step": "trs213idbr-etched.step",+      "model_3d_step_plain": "trs213idbr.step",+      "lbr": "trs213idbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C544325",+      "digikey": "296-25005-2-ND",+      "mouser": "595-TRS213IDBR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T04:03:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-25005-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TRS213IDBR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "DOUT3",+        "type": "output",+        "description": "RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate"+      },+      {+        "number": "2",+        "name": "DOUT1",+        "type": "output",+        "description": "RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate"+      },+      {+        "number": "3",+        "name": "DOUT2",+        "type": "output",+        "description": "RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate"+      },+      {+        "number": "4",+        "name": "RIN2",+        "type": "input",+        "description": "RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold"+      },+      {+        "number": "5",+        "name": "ROUT2",+        "type": "output",+        "description": "Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V"+      },+      {+        "number": "6",+        "name": "DIN2",+        "type": "input",+        "description": "Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V"+      },+      {+        "number": "7",+        "name": "DIN1",+        "type": "input",+        "description": "Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V"+      },+      {+        "number": "8",+        "name": "ROUT1",+        "type": "output",+        "description": "Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V"+      },+      {+        "number": "9",+        "name": "RIN1",+        "type": "input",+        "description": "RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold"+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference"+      },+      {+        "number": "11",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage, 4.5-5.5 V operating range, 14-20 mA typical current"+      },+      {+        "number": "12",+        "name": "C1+",+        "type": "passive",+        "description": "Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+"+      },+      {+        "number": "13",+        "name": "V+",+        "type": "power_out",+        "description": "Positive charge-pump output voltage for RS-232 driver supply"+      },+      {+        "number": "14",+        "name": "C1−",+        "type": "passive",+        "description": "Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND"+      },+      {+        "number": "15",+        "name": "C2+",+        "type": "passive",+        "description": "Charge-pump capacitor positive terminal, connect 0.1 µF external capacitor to V+"+      },+      {+        "number": "16",+        "name": "C2−",+        "type": "passive",+        "description": "Charge-pump capacitor negative terminal, connect 0.1 µF external capacitor to GND"+      },+      {+        "number": "17",+        "name": "V−",+        "type": "power_out",+        "description": "Negative charge-pump output voltage for RS-232 driver supply"+      },+      {+        "number": "18",+        "name": "RIN5",+        "type": "input",+        "description": "RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold"+      },+      {+        "number": "19",+        "name": "ROUT5",+        "type": "output",+        "description": "Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V"+      },+      {+        "number": "20",+        "name": "DIN3",+        "type": "input",+        "description": "Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V"+      },+      {+        "number": "21",+        "name": "DIN4",+        "type": "input",+        "description": "Driver input, 0-5.5 V with VIH ≥2 V and VIL ≤0.8 V"+      },+      {+        "number": "22",+        "name": "ROUT4",+        "type": "output",+        "description": "Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V"+      },+      {+        "number": "23",+        "name": "RIN4",+        "type": "input",+        "description": "RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold"+      },+      {+        "number": "24",+        "name": "EN",+        "type": "input",+        "description": "Active-high enable control, VIH ≥2.4 V enables outputs, VIL ≤0.8 V disables"+      },+      {+        "number": "25",+        "name": "SHDN",+        "type": "input",+        "description": "Active-low shutdown control, VIL ≤0.8 V reduces ICC to 15-50 µA"+      },+      {+        "number": "26",+        "name": "ROUT3",+        "type": "output",+        "description": "Receiver output, VOH = VCC-0.4 V and VOL = 0.4 V"+      },+      {+        "number": "27",+        "name": "RIN3",+        "type": "input",+        "description": "RS-232 receiver input, ±25 V range, 0.8-2.4 V switching threshold"+      },+      {+        "number": "28",+        "name": "DOUT4",+        "type": "output",+        "description": "RS-232 driver output, ±5-9 V at 3 kΩ load, 120 kbit/s maximum data rate"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 22,+        "cost_usd": 0.432,+        "at": "2026-09-27T04:02:46"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/trs213",+        "pages": 22,+        "sha256": "6404e251278d0f01",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file