main
History Download
Ray Publish 0.1.0 b8be3b8

TRF3765IRHBR

Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · VQFN-32(5x5)

TRF3765IRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND_DIG power_in Digital ground.
2 VCC_DIG power_in Digital power supply, 3.0 V to 3.6 V recommended (3.3 V nominal).
3 DATA input Serial programming interface (4WI) data input, high-impedance digital input.
4 CLOCK input Serial programming interface (4WI) clock input, high-impedance digital input.
5 STROBE input Serial programming interface (4WI) latch enable, high-impedance digital input.
6 READBACK output Serial programming interface readback output that can source or sink up to 8 mA.
7 VCC_DIV power_in Divider power supply, 3.0 V to 3.6 V recommended (3.3 V nominal).
8 GND_BUFF1 power_in Output buffer ground.
9 LO1_OUTP output LO1 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
10 LO1_OUTM output LO1 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
11 LO2_OUTM output LO2 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
12 LO2_OUTP output LO2 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
13 LO3_OUTP output LO3 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
14 LO3_OUTM output LO3 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
15 LO4_OUTM output LO4 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
16 LO4_OUTP output LO4 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused.
17 GND_BUFF2 power_in Output buffer ground.
18 EXTVCO_IN input External VCO input, high impedance, normally ac-coupled.
19 EXTVCO_CTRL output Digital control output to enable/disable the external VCO; can source or sink up to 8 mA.
20 VCC_TK power_in VCO LC tank power supply, 3.0 V to 5.5 V recommended (absolute maximum 5.5 V).
21 VCC_OSC power_in VCO core power supply, 3.0 V to 3.6 V recommended (3.3 V nominal).
22 GND_OSC power_in VCO core ground.
23 VTUNE_IN input VCO control voltage input.
24 VTUNE_REF power_in VTUNE reference ground.
25 CP_REF power_in Charge pump reference ground.
26 CP_OUT output Charge pump output to the external loop filter.
27 VCC_CP power_in Charge pump power supply, 3.0 V to 3.6 V recommended (3.3 V nominal).
28 VCC_PLL power_in PLL power supply, 3.0 V to 3.6 V recommended (3.3 V nominal).
29 GND power_in Ground; connect directly to the exposed pad ground.
30 REF_IN input Reference signal input, high impedance, normally ac-coupled; 0.5 MHz to 350 MHz reference.
31 GND power_in Ground; connect directly to the exposed pad ground.
32 LD output Lock detector digital output, configured by MUX_CTRL; can source or sink up to 8 mA.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32(5x5)
Category RTC/Clock Chip
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-level input voltage VIH 2 3.3 V 3
Low-level input voltage VIL 0 0.8 V 3
High-level output voltage VOH 0.8 × VCC Referenced to VCC_DIG 3
Low-level output voltage VOL 0.2 × VCC Referenced to VCC_DIG 3
Reference frequency fREF 0.5 350 MHz 3
Reference input sensitivity 0.2 3.3 VPP 3
PFD frequency fPFD 0.5 65 MHz 3
VCO frequency range fVCO 2400 4800 MHz Divide-by-1 3
Output frequency range fOUT 2400 4800 MHz Divide-by-1 3
Output frequency range fOUT 1200 2400 MHz Divide-by-2 3
Output frequency range fOUT 600 1200 MHz Divide-by-4 3
Output frequency range fOUT 300 600 MHz Divide-by-8 3
Supply voltage, all VCC pins except VCC_TK VCC 3 3.3 3.6 V 2
VCC_TK power-supply voltage VCC_TK 3 3.3 5.5 V 3.3-V to 5.5-V power-supply voltage 2
Operating ambient temperature range TA -40 85 °C 2
Operating virtual junction temperature range TJ -40 150 °C 2
Supply voltage, all VCC pins except VCC_TK VCC -0.3 3.6 V 2
Supply voltage, VCC_TK VCC_TK -0.3 5.5 V 2
Digital I/O voltage range -0.3 V upper limit printed as VI + 0.5 V 2
Operating virtual junction temperature range TJ -40 150 °C 2
Operating ambient temperature range TA -40 85 °C 2
Storage temperature range Tstg -40 150 °C 2
ESD, human body model HBM 1000 V 2
ESD, charged device model CDM 1500 V 2
Junction-to-ambient thermal resistance θJA 31.6 °C/W RHB, 32 pins 2
Junction-to-case (top) thermal resistance θJCtop 21.6 °C/W RHB, 32 pins 2
Junction-to-board thermal resistance θJB 5.6 °C/W RHB, 32 pins 2
Junction-to-top characterization parameter ψJT 0.3 °C/W RHB, 32 pins 2
Junction-to-board characterization parameter ψJB 5.5 °C/W RHB, 32 pins 2
Junction-to-case (bottom) thermal resistance θJCbot 1.1 °C/W RHB, 32 pins 2
Hold time, data to clock th 20 ns 4WI write 21
Setup time, data to clock tsu1 20 ns 4WI write 21
Clock low duration t(CH) 20 ns 4WI write 21
Clock high duration t(CL) 20 ns 4WI write 21
Setup time, clock to enable tsu2 20 ns 4WI write 21
Clock period t(CLK) 50 ns 4WI write 21
Enable time tw 50 ns 4WI write 21
Setup time, latch to data tsu3 70 ns 4WI write 21
Total supply current ICC 115 mA Internal VCO, 1 output buffer on, divide-by-1 3
Total supply current ICC 190 mA Internal VCO, 4 output buffers on, divide-by-1 3
Total supply current ICC 120 mA Internal VCO, 1 output buffer on, divide-by-8 3
Total supply current ICC 182 mA Internal VCO, 4 output buffers on, divide-by-8 3
Total supply current ICC 89 mA External VCO mode, 1 output buffer on, divide-by-1 3
Reference input parallel capacitance 2 pF 10 MHz 3
Reference input parallel resistance 2500 Ω 10 MHz 3
Charge pump current ICP_OUT 1.94 mA 4WI programmable; ICP[4..0] = 00000 3
In-band normalized phase noise floor -221 dBc/Hz Integer mode 3
VCO gain KV -65 MHz/V VCP = 1 V 3
VCO free-running phase noise -82 dBc/Hz VCC_TK = 3.3 V, at 10 kHz, fVCO = 2650 MHz 3
VCO free-running phase noise -110 dBc/Hz VCC_TK = 3.3 V, at 100 kHz, fVCO = 2650 MHz 3
VCO free-running phase noise -130 dBc/Hz VCC_TK = 3.3 V, at 1 MHz, fVCO = 2650 MHz 3
VCO free-running phase noise -149 dBc/Hz VCC_TK = 3.3 V, at 10 MHz, fVCO = 2650 MHz 3
VCO free-running phase noise -155 dBc/Hz VCC_TK = 3.3 V, at 40 MHz, fVCO = 2650 MHz 3
VCO free-running phase noise -133 dBc/Hz VCC_TK = 5 V, at 1 MHz, fVCO = 2650 MHz 3
Integrated RMS jitter 0.36 ps Fractional mode, fOUT = 2.6 GHz, fPFD = 30.72 MHz 3
Integrated RMS jitter 0.52 ps Integer mode, fOUT = 2.6 GHz, fPFD = 1.6 MHz 3
PLO output power 6.5 dBm Differential, divide-by-1, one output buffer on, maximum BUFOUT_BIAS 3
External VCO input maximum frequency 9000 MHz 20-dB gain loss, VCO pass-through, no PLL 3
External VCO input minimum frequency 15 MHz 20-dB gain loss, VCO pass-through, no PLL, divide-by-1 3
External VCO input level 0 dBm 3

CAD (KiCad official)

  • Symbol: TRF3765IRHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: trf3765irhbr-etched.step / trf3765irhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); trf3765irhbr.step / trf3765irhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (53 pp, sha256 8305370b3a816fc8, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF