Generated by kicad-footprint-generator · KiCad file format 20260206
TRF3765IRHBR
Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · VQFN-32(5x5)
TRF3765IRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND_DIG | power_in | Digital ground. |
| 2 | VCC_DIG | power_in | Digital power supply, 3.0 V to 3.6 V recommended (3.3 V nominal). |
| 3 | DATA | input | Serial programming interface (4WI) data input, high-impedance digital input. |
| 4 | CLOCK | input | Serial programming interface (4WI) clock input, high-impedance digital input. |
| 5 | STROBE | input | Serial programming interface (4WI) latch enable, high-impedance digital input. |
| 6 | READBACK | output | Serial programming interface readback output that can source or sink up to 8 mA. |
| 7 | VCC_DIV | power_in | Divider power supply, 3.0 V to 3.6 V recommended (3.3 V nominal). |
| 8 | GND_BUFF1 | power_in | Output buffer ground. |
| 9 | LO1_OUTP | output | LO1 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 10 | LO1_OUTM | output | LO1 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 11 | LO2_OUTM | output | LO2 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 12 | LO2_OUTP | output | LO2 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 13 | LO3_OUTP | output | LO3 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 14 | LO3_OUTM | output | LO3 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 15 | LO4_OUTM | output | LO4 output negative terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 16 | LO4_OUTP | output | LO4 output positive terminal, open-collector requiring a pull-up resistor, normally ac-coupled; may be left open if unused. |
| 17 | GND_BUFF2 | power_in | Output buffer ground. |
| 18 | EXTVCO_IN | input | External VCO input, high impedance, normally ac-coupled. |
| 19 | EXTVCO_CTRL | output | Digital control output to enable/disable the external VCO; can source or sink up to 8 mA. |
| 20 | VCC_TK | power_in | VCO LC tank power supply, 3.0 V to 5.5 V recommended (absolute maximum 5.5 V). |
| 21 | VCC_OSC | power_in | VCO core power supply, 3.0 V to 3.6 V recommended (3.3 V nominal). |
| 22 | GND_OSC | power_in | VCO core ground. |
| 23 | VTUNE_IN | input | VCO control voltage input. |
| 24 | VTUNE_REF | power_in | VTUNE reference ground. |
| 25 | CP_REF | power_in | Charge pump reference ground. |
| 26 | CP_OUT | output | Charge pump output to the external loop filter. |
| 27 | VCC_CP | power_in | Charge pump power supply, 3.0 V to 3.6 V recommended (3.3 V nominal). |
| 28 | VCC_PLL | power_in | PLL power supply, 3.0 V to 3.6 V recommended (3.3 V nominal). |
| 29 | GND | power_in | Ground; connect directly to the exposed pad ground. |
| 30 | REF_IN | input | Reference signal input, high impedance, normally ac-coupled; 0.5 MHz to 350 MHz reference. |
| 31 | GND | power_in | Ground; connect directly to the exposed pad ground. |
| 32 | LD | output | Lock detector digital output, configured by MUX_CTRL; can source or sink up to 8 mA. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level input voltage | VIH | 2 | 3.3 | V | 3 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 3 | ||
| High-level output voltage | VOH | 0.8 | × VCC | Referenced to VCC_DIG | 3 | ||
| Low-level output voltage | VOL | 0.2 | × VCC | Referenced to VCC_DIG | 3 | ||
| Reference frequency | fREF | 0.5 | 350 | MHz | 3 | ||
| Reference input sensitivity | 0.2 | 3.3 | VPP | 3 | |||
| PFD frequency | fPFD | 0.5 | 65 | MHz | 3 | ||
| VCO frequency range | fVCO | 2400 | 4800 | MHz | Divide-by-1 | 3 | |
| Output frequency range | fOUT | 2400 | 4800 | MHz | Divide-by-1 | 3 | |
| Output frequency range | fOUT | 1200 | 2400 | MHz | Divide-by-2 | 3 | |
| Output frequency range | fOUT | 600 | 1200 | MHz | Divide-by-4 | 3 | |
| Output frequency range | fOUT | 300 | 600 | MHz | Divide-by-8 | 3 | |
| Supply voltage, all VCC pins except VCC_TK | VCC | 3 | 3.3 | 3.6 | V | 2 | |
| VCC_TK power-supply voltage | VCC_TK | 3 | 3.3 | 5.5 | V | 3.3-V to 5.5-V power-supply voltage | 2 |
| Operating ambient temperature range | TA | -40 | 85 | °C | 2 | ||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Supply voltage, all VCC pins except VCC_TK | VCC | -0.3 | 3.6 | V | 2 | ||
| Supply voltage, VCC_TK | VCC_TK | -0.3 | 5.5 | V | 2 | ||
| Digital I/O voltage range | -0.3 | V | upper limit printed as VI + 0.5 V | 2 | |||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Operating ambient temperature range | TA | -40 | 85 | °C | 2 | ||
| Storage temperature range | Tstg | -40 | 150 | °C | 2 | ||
| ESD, human body model | HBM | 1000 | V | 2 | |||
| ESD, charged device model | CDM | 1500 | V | 2 | |||
| Junction-to-ambient thermal resistance | θJA | 31.6 | °C/W | RHB, 32 pins | 2 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 21.6 | °C/W | RHB, 32 pins | 2 | ||
| Junction-to-board thermal resistance | θJB | 5.6 | °C/W | RHB, 32 pins | 2 | ||
| Junction-to-top characterization parameter | ψJT | 0.3 | °C/W | RHB, 32 pins | 2 | ||
| Junction-to-board characterization parameter | ψJB | 5.5 | °C/W | RHB, 32 pins | 2 | ||
| Junction-to-case (bottom) thermal resistance | θJCbot | 1.1 | °C/W | RHB, 32 pins | 2 | ||
| Hold time, data to clock | th | 20 | ns | 4WI write | 21 | ||
| Setup time, data to clock | tsu1 | 20 | ns | 4WI write | 21 | ||
| Clock low duration | t(CH) | 20 | ns | 4WI write | 21 | ||
| Clock high duration | t(CL) | 20 | ns | 4WI write | 21 | ||
| Setup time, clock to enable | tsu2 | 20 | ns | 4WI write | 21 | ||
| Clock period | t(CLK) | 50 | ns | 4WI write | 21 | ||
| Enable time | tw | 50 | ns | 4WI write | 21 | ||
| Setup time, latch to data | tsu3 | 70 | ns | 4WI write | 21 | ||
| Total supply current | ICC | 115 | mA | Internal VCO, 1 output buffer on, divide-by-1 | 3 | ||
| Total supply current | ICC | 190 | mA | Internal VCO, 4 output buffers on, divide-by-1 | 3 | ||
| Total supply current | ICC | 120 | mA | Internal VCO, 1 output buffer on, divide-by-8 | 3 | ||
| Total supply current | ICC | 182 | mA | Internal VCO, 4 output buffers on, divide-by-8 | 3 | ||
| Total supply current | ICC | 89 | mA | External VCO mode, 1 output buffer on, divide-by-1 | 3 | ||
| Reference input parallel capacitance | 2 | pF | 10 MHz | 3 | |||
| Reference input parallel resistance | 2500 | Ω | 10 MHz | 3 | |||
| Charge pump current | ICP_OUT | 1.94 | mA | 4WI programmable; ICP[4..0] = 00000 | 3 | ||
| In-band normalized phase noise floor | -221 | dBc/Hz | Integer mode | 3 | |||
| VCO gain | KV | -65 | MHz/V | VCP = 1 V | 3 | ||
| VCO free-running phase noise | -82 | dBc/Hz | VCC_TK = 3.3 V, at 10 kHz, fVCO = 2650 MHz | 3 | |||
| VCO free-running phase noise | -110 | dBc/Hz | VCC_TK = 3.3 V, at 100 kHz, fVCO = 2650 MHz | 3 | |||
| VCO free-running phase noise | -130 | dBc/Hz | VCC_TK = 3.3 V, at 1 MHz, fVCO = 2650 MHz | 3 | |||
| VCO free-running phase noise | -149 | dBc/Hz | VCC_TK = 3.3 V, at 10 MHz, fVCO = 2650 MHz | 3 | |||
| VCO free-running phase noise | -155 | dBc/Hz | VCC_TK = 3.3 V, at 40 MHz, fVCO = 2650 MHz | 3 | |||
| VCO free-running phase noise | -133 | dBc/Hz | VCC_TK = 5 V, at 1 MHz, fVCO = 2650 MHz | 3 | |||
| Integrated RMS jitter | 0.36 | ps | Fractional mode, fOUT = 2.6 GHz, fPFD = 30.72 MHz | 3 | |||
| Integrated RMS jitter | 0.52 | ps | Integer mode, fOUT = 2.6 GHz, fPFD = 1.6 MHz | 3 | |||
| PLO output power | 6.5 | dBm | Differential, divide-by-1, one output buffer on, maximum BUFOUT_BIAS | 3 | |||
| External VCO input maximum frequency | 9000 | MHz | 20-dB gain loss, VCO pass-through, no PLL | 3 | |||
| External VCO input minimum frequency | 15 | MHz | 20-dB gain loss, VCO pass-through, no PLL, divide-by-1 | 3 | |||
| External VCO input level | 0 | dBm | 3 |
CAD (KiCad official)
- Symbol:
TRF3765IRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
trf3765irhbr-etched.step/trf3765irhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trf3765irhbr.step/trf3765irhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
8305370b3a816fc8, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).