main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tqp3m9036: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md tqp3m9036: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
tqp3m9036-etched.glb tqp3m9036: factory component page (tier=lcsc) · Ray
tqp3m9036-etched.step tqp3m9036: factory component page (tier=lcsc) · Ray
tqp3m9036-hero.glb tqp3m9036: hero GLB from the etched model (keeps the MPN mark) · Ray
tqp3m9036-hero.overlay.json tqp3m9036: hero GLB from the etched model (keeps the MPN mark) · Ray
tqp3m9036.glb Publish 0.1.0 · Ray
tqp3m9036.kicad_mod Publish 0.1.0 · Ray
tqp3m9036.kicad_sym Publish 0.1.0 · Ray
tqp3m9036.lbr Publish 0.1.0 · Ray
tqp3m9036.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

TQP3M9036

Qorvo · Low Noise Amplifiers (LNA) - RF · DFN-8-EP(2x2)

TQP3M9036 from Qorvo, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No electrical connection; provide grounded land pad for PCB mounting integrity.
2 RF In input RF input pin, 50 ohm internally matched; a DC block is required.
3 NC unconnected No electrical connection; provide grounded land pad for PCB mounting integrity.
4 NC unconnected No electrical connection; provide grounded land pad for PCB mounting integrity.
5 NC unconnected No electrical connection; provide grounded land pad for PCB mounting integrity.
6 Shut Down input A high voltage turns off the device; if not connected or less than 1V the device operates normally (Vlow 0 to 0.1 V, Vhigh 0.5 V to VDD).
7 RF Out / DCBias bidirectional RF output pin, 50 ohm internally matched; DC bias (+3.3 to +5.25 V) must be injected through an RF bias choke/inductor.
8 NC unconnected No electrical connection; provide grounded land pad for PCB mounting integrity.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Qorvo
Package DFN-8-EP(2x2)
Category RF & Radio
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TSTORE -65 150 °C 2
RF Input Power, CW 22 dBm CW, 50 Ω, T=+25 °C 2
Device Voltage (VDD) VDD 7 V 2
Device Voltage (VCC) VCC 3.3 5 5.25 V 2
TCASE TCASE -40 105 °C 2
Tj for >106 hours MTTF Tj 190 °C for >106 hours MTTF 2
Operational Frequency Range 50 2000 MHz 2
Gain 18.2 19.8 21.2 dB 2
Noise Figure 0.45 0.75 dB 2
Output IP3 32 36 dBm Pout=+5 dBm/tone, Δf=1 MHz 2
Input Return Loss 13 dB Note 1 2
Output Return Loss 11 dB Note 1 2
Output P1dB 20 dBm 2
Power Shutdown Control, On state 0 0.4 V On state 2
Power Shutdown Control, Off state 2.5 3.3 V Off state (Power down) 2
Current, IDD On state IDD 40 68 90 mA On state 2
Current, IDD Off state IDD 3 4 mA Off state (Power down) 2
Shutdown pin current, ISD ISD 140 µA VPD ≥ 3 V 2
Switching Speed ON time 1 µs 50%Ctrl to 90% RF 2
Switching Speed OFF time 0.5 µs 50%Ctrl to 10% RF 2
Thermal Resistance, θjc θjc 62 °C/W channel to case 2
Pin 6 (VPD) voltage Vlow Vlow 0 0.1 V 2
Pin 6 (VPD) voltage Vhigh Vhigh 0.5 V expressed as 0.5 VDD 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes. Solder profiles available upon request. 12

CAD (KiCad official)

  • Symbol: TQP3M9036
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tqp3m9036-etched.step / tqp3m9036-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tqp3m9036.step / tqp3m9036.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Qorvo datasheet, copy hosted by LCSC (12 pp, sha256 f90f98324beb667d, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF