TPV706SL1-SR

{
  "slug": "tpv706sl1-sr",
  "version": "0.1.0",
  "type": "component",
  "description": "3PEAK , SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "ic",
    "tpv706sl1-sr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpv706sl1-sr.kicad_sym",
    "tpv706sl1-sr.kicad_mod",
    "tpv706sl1-sr.glb",
    "tpv706sl1-sr.step",
    "tpv706sl1-sr.lbr",
    "docs/hero.png",
    "docs/tpv706sl1-sr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpv706sl1-sr-hero.glb",
    "tpv706sl1-sr-hero.overlay.json",
    "tpv706sl1-sr-etched.glb"
  ],
  "component": {
    "mpn": "TPV706SL1-SR",
    "manufacturer": "3PEAK",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "IC",
    "subcategory": "IC",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903887773843456",
    "parts": {
      "symbol": "tpv706sl1-sr.kicad_sym",
      "footprint": "tpv706sl1-sr.kicad_mod",
      "model_3d": "tpv706sl1-sr-hero.glb",
      "model_3d_plain": "tpv706sl1-sr-etched.glb",
      "model_3d_step": "tpv706sl1-sr-etched.step",
      "model_3d_step_plain": "tpv706sl1-sr.step",
      "lbr": "tpv706sl1-sr.lbr"
    },
    "distributor_links": {
      "lcsc": "C7469764",
      "digikey": "5503-TPV706SL1-SRTR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T10:30:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "5503-TPV706SL1-SRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MR",
        "type": "input",
        "description": "Manual reset input: driving MR low asserts RESET, MR has an internal pull-up current so it reads high when unconnected, and its thresholds are 0.3×VCC (low) and 0.7×VCC (high)."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply voltage being monitored, with an operating range of 1 V to 5.5 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin that should be connected to the ground reference."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Power-fail input with a 1.25-V falling threshold (1.18 V to 1.32 V); PFO goes low when PFI is below 1.25 V, and PFI should be connected to GND if unused."
      },
      {
        "number": "5",
        "name": "PFO",
        "type": "output",
        "description": "Power-fail output that goes low when PFI is below 1.25 V and otherwise stays high, with VOL of 0.4 V max at 1.6 mA sink (VCC ≥ 5 V)."
      },
      {
        "number": "6",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input whose logic transitions clear the watchdog timer; if the pin stays low or high for the watchdog timeout (1.6 s typ, 1 s to 2.4 s) WDO goes low, and floating WDI disables the watchdog function."
      },
      {
        "number": "7",
        "name": "RESET",
        "type": "output",
        "description": "Active-low push-pull reset output that is asserted when VCC is below the reset threshold or MR is low, stays low for 200 ms (typ) after VCC rises above the threshold or MR returns high, and is guaranteed low down to VCC = 1 V."
      },
      {
        "number": "8",
        "name": "WDO",
        "type": "output",
        "description": "Watchdog output that pulls low on a watchdog timeout and stays low while VCC is below the reset threshold, returning high with no delay once VCC rises above the threshold."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers the whole TPV706 family (nine threshold variants, all SOP8). The pinout is the ; Conflicting WDI text: the Table 1 description says WDI 'generates a reset' on timeout, while the Fea; Minor inconsistency on WDI floating: Table 1 says floating WDI disables the watchdog, while the Figu"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0452,
        "at": "2026-10-17T10:28:30"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903887773843456",
        "pages": 16,
        "sha256": "7504206ccaf42b7c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpv706sl1-sr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpv706sl1-sr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5796804a4b71ebbe8770394470ea8522fd5b13db036bcf4d00b4d85ceb3cb59a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}