TPT75176H-VS1R

{
  "slug": "tpt75176h-vs1r",
  "version": "0.1.0",
  "type": "component",
  "description": "3PEAK Global Sourcing Parts, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "tpt75176h-vs1r",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpt75176h-vs1r.kicad_sym",
    "tpt75176h-vs1r.kicad_mod",
    "tpt75176h-vs1r.glb",
    "tpt75176h-vs1r.step",
    "tpt75176h-vs1r.lbr",
    "docs/hero.png",
    "docs/tpt75176h-vs1r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpt75176h-vs1r-hero.glb",
    "tpt75176h-vs1r-hero.overlay.json",
    "tpt75176h-vs1r-etched.glb"
  ],
  "component": {
    "mpn": "TPT75176H-VS1R",
    "manufacturer": "3PEAK",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904044074717184",
    "parts": {
      "symbol": "tpt75176h-vs1r.kicad_sym",
      "footprint": "tpt75176h-vs1r.kicad_mod",
      "model_3d": "tpt75176h-vs1r-hero.glb",
      "model_3d_plain": "tpt75176h-vs1r-etched.glb",
      "model_3d_step": "tpt75176h-vs1r-etched.step",
      "model_3d_step_plain": "tpt75176h-vs1r.step",
      "lbr": "tpt75176h-vs1r.lbr"
    },
    "distributor_links": {
      "lcsc": "C7495292",
      "digikey": "5503-TPT75176H-VS1RTR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-11-03T17:39:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "5503-TPT75176H-VS1RTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "R",
        "type": "output",
        "description": "Receiver output: drives valid bus High when VID is above VIT+ and valid bus Low when VID is below VIT-, and goes high-Z when RE is high; outputs are rated for high drive (typically >25mA at VOL = 1V)."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Active-low receiver enable: RE low enables the receiver output, and RE high disables it to high-Z; logic input with VIH of 2V minimum and VIL of 0.8V maximum."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver enable: DE high enables the driver outputs A and B, and DE low (or open, which defaults to disabled) puts them in high-Z; logic input with VIH of 2V minimum and VIL of 0.8V maximum."
      },
      {
        "number": "4",
        "name": "D",
        "type": "input",
        "description": "Driver data input: D high drives A high and B low, and D low drives A low and B high when DE is high; logic input with VIH of 2V minimum and VIL of 0.8V maximum, and absolute maximum of VCC + 0.3V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device supply (VDD to GND absolute maximum range is -0.3V to +7V)."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Non-inverting RS-485 bus pin: bus common-mode range is -7V to +12V, with ±15 kV HBM and ±15 kV IEC-ESD protection and an input/output absolute voltage range of -15V to +15V."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting RS-485 bus pin: bus common-mode range is -7V to +12V, with ±15 kV HBM and ±15 kV IEC-ESD protection and an input/output absolute voltage range of -15V to +15V."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage: 3V to 5.5V recommended operating range; the device keeps its Tx and Rx outputs disabled when VCC is below about 2.5V (Hot Plug)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Pin Configuration (Top View) drawing on page 1 is an image and its pin labels are not in the ext; The datasheet states that the same pinout covers the 8-Pin SOP, MSOP and DFN packages (cover page), ; The datasheet gives no pin-type classification for each pin. The types here are KiCad ERC classes ch"
        ],
        "pages_sent": 15,
        "cost_usd": 0.181,
        "at": "2026-11-03T17:39:23"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904044074717184",
        "pages": 15,
        "sha256": "540fb21e172fd43d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpt75176h-vs1r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpt75176h-vs1r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b7aa0392f6754441860235d939e9633ebca01ae80db780f37a9fc58b73f43f29",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}