component
TPT75176H-VS1R
Public Made by Adomby adom
3PEAK Global Sourcing Parts, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 3d ago |
| viewers | 3d ago |
| package.json | 3d ago |
| page.json | 3d ago |
| README.md | 3d ago |
| tpt75176h-vs1r-etched.glb | 3d ago |
| tpt75176h-vs1r-etched.step | 3d ago |
| tpt75176h-vs1r-hero.glb | 3d ago |
| tpt75176h-vs1r-hero.overlay.json | 3d ago |
| tpt75176h-vs1r.glb | 3d ago |
| tpt75176h-vs1r.kicad_mod | 3d ago |
| tpt75176h-vs1r.kicad_sym | 3d ago |
| tpt75176h-vs1r.lbr | 3d ago |
| tpt75176h-vs1r.step | 3d ago |
TPT75176H-VS1R
3PEAK · Global Sourcing Parts · MSOP-8
TPT75176H-VS1R from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver output: drives valid bus High when VID is above VIT+ and valid bus Low when VID is below VIT-, and goes high-Z when RE is high; outputs are rated for high drive (typically >25mA at VOL = 1V). |
| 2 | RE | input | Active-low receiver enable: RE low enables the receiver output, and RE high disables it to high-Z; logic input with VIH of 2V minimum and VIL of 0.8V maximum. |
| 3 | DE | input | Driver enable: DE high enables the driver outputs A and B, and DE low (or open, which defaults to disabled) puts them in high-Z; logic input with VIH of 2V minimum and VIL of 0.8V maximum. |
| 4 | D | input | Driver data input: D high drives A high and B low, and D low drives A low and B high when DE is high; logic input with VIH of 2V minimum and VIL of 0.8V maximum, and absolute maximum of VCC + 0.3V. |
| 5 | GND | power_in | Ground reference for the device supply (VDD to GND absolute maximum range is -0.3V to +7V). |
| 6 | A | bidirectional | Non-inverting RS-485 bus pin: bus common-mode range is -7V to +12V, with ±15 kV HBM and ±15 kV IEC-ESD protection and an input/output absolute voltage range of -15V to +15V. |
| 7 | B | bidirectional | Inverting RS-485 bus pin: bus common-mode range is -7V to +12V, with ±15 kV HBM and ±15 kV IEC-ESD protection and an input/output absolute voltage range of -15V to +15V. |
| 8 | VCC | power_in | Supply voltage: 3V to 5.5V recommended operating range; the device keeps its Tx and Rx outputs disabled when VCC is below about 2.5V (Hot Plug). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | MSOP-8 |
| Category | Global Sourcing Parts |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 3 | 5.5 | V | 4 | |||
| Operating temperature range | -40 | 125 | °C | 4 | |||
| Bus pin common mode voltage range | -7 | 12 | V | 4 | |||
| VDD to GND | VDD | -0.3 | 7 | V | 4 | ||
| Input voltages D, DE, RE (max VCC+0.3V, stored as null) | -0.3 | V | 4 | ||||
| Input/output voltages A, B | -15 | 15 | V | 4 | |||
| A, B transient pulse | -100 | 100 | V | Through 100Ω, Note 1 (TIA/EIA-485-A 4.2.6, 15μs at 1% duty cycle) | 4 | ||
| Receiver output R (max VCC+0.3V, stored as null) | -0.3 | V | 4 | ||||
| Maximum storage temperature range | -65 | 150 | °C | 4 | |||
| Maximum junction temperature (plastic package) | 150 | °C | 4 | ||||
| /VOD/ driver differential-output voltage magnitude (min, typ) | /VOD/ | 2.1 | 2.8 | V | RL = 60 Ω with VA or VB from -7 to +12 V, VCC = 4.5V~5.5V; See Figure 1B | 5 | |
| /VOD/ driver differential-output voltage magnitude (min, typ) | /VOD/ | 1.5 | 2 | V | RL = 60 Ω with VA or VB from -7 to +12 V, VCC = 3.0~3.6V | 5 | |
| /VOD/ driver differential-output voltage magnitude (min, typ) | /VOD/ | 1.5 | 1.9 | V | RL = 54 Ω, VCC = 3V | 5 | |
| /VOD/ driver differential-output voltage magnitude (min, typ) | /VOD/ | 2.1 | 3.5 | V | RL = 100 Ω, VCC = 5V | 5 | |
| /VOD/ driver differential-output voltage magnitude (min, typ) | /VOD/ | 1.5 | 2.3 | V | RL = 100 Ω, VCC = 3V | 5 | |
| Change in magnitude of driver differential-output voltage | ⊿/VOD/ | -50 | 1 | 50 | mV | RL = 54 Ω, CL=50 pF, VCC = 5V; See Figure 1A | 5 |
| Steady-state common-mode output voltage | VOC(SS) | 1 | 3 | V | Center of two 27 Ω load resistors; See Figure 1A | 5 | |
| Change in differential driver common-mode output voltage | ⊿VOC | 50 | mV | 5 | |||
| Peak-to-peak driver common-mode output voltage | VOC(PP) | 500 | mV | 5 | |||
| Positive-going receiver differential-input voltage threshold (min, typ) | VIT+ | -90 | -40 | mV | VA or VB from -7 to +12 V | 5 | |
| Negative-going receiver differential-input voltage threshold (min, typ) | VIT- | -220 | -155 | mV | VA or VB from -7 to +12 V | 5 | |
| Logic input high voltage | VIH | 2 | V | D, DE, RE | 5 | ||
| Logic input low voltage | VIL | 0.8 | V | D, DE, RE | 5 | ||
| Receiver high-level output voltage (min, typ) | VOH | 3 | 4.5 | V | IOH= -8 mA, Vcc = 4.5V to 5.5V | 5 | |
| Receiver high-level output voltage (min, typ) | VOH | 2.45 | 2.65 | V | IOH= -8 mA, Vcc = 3.0V to 3.6V | 5 | |
| Receiver low-level output voltage | VOL | 0.4 | V | IOL= 8 mA, Vcc = 4.5V to 5.5V | 5 | ||
| Receiver low-level output voltage | VOL | 0.5 | V | IOL= 8 mA, Vcc = 3.0V to 3.6V | 5 | ||
| Driver input, driver enable and receiver enable input current | II | -5 | 5 | μA | D, DE, RE | 5 | |
| Receiver high-Z output current | IOZ | -1 | 1 | μA | VO = 0 V or VCC, /RE at VCC | 5 | |
| Driver short-circuit output current magnitude | /IOS/ | -250 | 120 | 250 | mA | with VA or VB from -7 to +12 V | 5 |
| Bus input current (driver disabled), VI = 12 V | IIN | 120 | uA | VCC = 4.5 to 5.5 V or VCC = 0 V, DE at 0 V; VI = 12 V | 5 | ||
| Bus input current (driver disabled), VI = -7 V | IIN | -110 | uA | VCC = 4.5 to 5.5 V or VCC = 0 V, DE at 0 V; VI = -7 V | 5 | ||
| Supply current (quiescent), driver and receiver enabled | ICC | 1.9 | 2.2 | mA | DE = VCC, /RE = GND, No LOAD | 5 | |
| Supply current (quiescent), driver enabled, receiver disabled | ICC | 1.8 | 2.2 | mA | DE = VCC, /RE = VCC, No LOAD | 5 | |
| Supply current (quiescent), driver disabled, receiver enabled | ICC | 1.7 | 2 | mA | DE = GND, /RE = GND, No LOAD | 5 | |
| Supply current (quiescent), driver and receiver disabled | ICC | 1.65 | 2 | mA | DE = GND, /RE = VCC, D = Vcc, No LOAD | 5 | |
| Maximum data rate | fMAX | 10 | Mbps | VOD ≥ ±1.5V, RL = 54Ω, CL = 100pF (Figure 4) | 6 | ||
| Driver propagation delay (typ, max) | tPHL, tPLH | 21 | 30 | ns | 6 | ||
| Driver pulse skew (typ, max) | tSK(P) | 3 | 6 | ns | 6 | ||
| Driver disable time (typ, max) | tPHZ, tPLZ | 30 | 50 | ns | See Figure 3 | 6 | |
| Driver enable time, receiver enabled (typ, max) | tPZH, tPZL | 20 | 45 | ns | Receiver enabled | 6 | |
| Driver enable time, receiver disabled (typ, max) | tPZH, tPZL | 30 | 50 | ns | Receiver disabled | 6 | |
| Receiver propagation delay time (typ, max) | tPHL, tPLH | 35 | 50 | ns | 6 | ||
| Receiver pulse skew (typ, max) | tSK(P) | 10 | 15 | ns | 6 | ||
| Receiver disable time (typ, max) | tPHZ, tPLZ | 30 | 60 | ns | 6 | ||
| Receiver enable time, driver enabled (typ, max) | tPZH, tPZL | 20 | 30 | ns | Driver enabled | 6 | |
| Receiver enable time, driver disabled (typ, max) | tPZH, tPZL | 25 | 40 | ns | Driver disabled | 6 | |
| ESD Human Body Model, RS-485 pins (A, B) | -15 | 15 | kV | Per ANSI/ESDA/JEDEC JS-001 / ANSI/ESD STM5.5.1 | 6 | ||
| ESD Human Body Model, all other pins | -4 | 4 | kV | Per ANSI/ESDA/JEDEC JS-001 / ANSI/ESD STM5.5.1 | 6 | ||
| ESD Charged Device Model, RS-485 (A, B) | -1.5 | 1.5 | kV | Per ANSI/ESDA/JEDEC JS-002 | 6 | ||
| ESD IEC-61000-4-2 contact, bus pins RS-485 (A, B) | -15 | 15 | kV | IEC-61000-4-2, IEC-Contact ESD | 6 | ||
| Thermal resistance ΘJA, 8-pin MSOP package | ΘJA | 200 | °C/W | Typical | 4 | ||
| Hysteresis (VIT+, VIT-) | VHYS | 70 | mV | Footnote [1] | 5 | ||
| Differential output capacitance | COD | 8 | pF | Footnote [1] | 5 | ||
| Bus pin A,B short current | 150 | mA | 5 | ||||
| Driver differential-output rise and fall times | tr, tf | 8 | ns | RL = 54 Ω, CL=50pF; See Figure 2 | 6 | ||
| Receiver output rise and fall times | tr, tf | 14 | ns | CL=15 pF; See Figure 5 | 6 |
CAD (KiCad official)
- Symbol:
TPT75176H-VS1R - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tpt75176h-vs1r-etched.step/tpt75176h-vs1r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpt75176h-vs1r.step/tpt75176h-vs1r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (15 pp, sha256
540fb21e172fd43d, retrieved 2026-11-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).