Generated by kicad-footprint-generator · KiCad file format 20260206
TPT4032-TS3R
3PEAK · RS-485 / RS-422 ICs · TSSOP-16
TPT4032-TS3R from 3PEAK, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | RS422/RS485 differential input (inverting) for receiver 1, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 2 | 1A | input | RS422/RS485 differential input (noninverting) for receiver 1, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 3 | 1R | output | Logic-level output of receiver 1, which is high-impedance when the enable inputs disable the receiver. |
| 4 | G | input | Active-high receiver enable input; logic high on G (with /G low) enables normal receiver operation, and VIH is 2.0 V minimum and VIL is 0.8 V maximum. |
| 5 | 2R | output | Logic-level output of receiver 2, which is high-impedance when the enable inputs disable the receiver. |
| 6 | 2A | input | RS422/RS485 differential input (noninverting) for receiver 2, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 7 | 2B | input | RS422/RS485 differential input (inverting) for receiver 2, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 8 | GND | power_in | Ground reference pin for the device. |
| 9 | 3B | input | RS422/RS485 differential input (inverting) for receiver 3, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 10 | 3A | input | RS422/RS485 differential input (noninverting) for receiver 3, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 11 | 3R | output | Logic-level output of receiver 3, which is high-impedance when the enable inputs disable the receiver. |
| 12 | /G | input | Active-low receiver enable input; logic low on /G (with G high) enables normal receiver operation, and VIH is 2.0 V minimum and VIL is 0.8 V maximum. |
| 13 | 4R | output | Logic-level output of receiver 4, which is high-impedance when the enable inputs disable the receiver. |
| 14 | 4A | input | RS422/RS485 differential input (noninverting) for receiver 4, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 15 | 4B | input | RS422/RS485 differential input (inverting) for receiver 4, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity. |
| 16 | VCC | power_in | Power supply pin; the datasheet specifies VCC from 3.0 V to 5.5V, with a 0.1 µF bypass capacitor placed close to this pin recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | 7 | V | 5 | ||
| Input voltage (G, /G); max printed as VCC + 0.3 V | VI | -0.3 | V | 5 | |||
| Common-mode input voltage (absolute maximum) | VCM | -10 | 15 | V | 5 | ||
| Output voltage; max printed as VCC + 0.5 V | VO | -0.5 | V | 5 | |||
| Input or output clamp current (±20 mA) | IIK, IOK | -20 | 20 | mA | 5 | ||
| Output current (±20 mA) | IO | -20 | 20 | mA | 5 | ||
| Short-circuit output current (absolute maximum), printed as single value | IOS | 200 | mA | 5 | |||
| Operating virtual junction temperature (absolute maximum), printed as single value | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VCC | 3 | 5.5 | V | 5 | ||
| High-level input voltage (receiver enable inputs); max printed as VCC | VIH | 2 | V | 5 | |||
| Low-level input voltage (receiver enable inputs) | VIL | 0 | 0.8 | V | 5 | ||
| Common-mode input voltage | VCM | -7 | 12 | V | 5 | ||
| Differential load resistance, printed as single value | RL | 100 | Ω | 5 | |||
| Operating ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Enable-input clamp voltage (5.0V table); printed -0.8 -1.5 assigned min -1.5 / max -0.8 | VIK | -1.5 | -0.8 | V | VCC=5.0V; IO = 18 mA | 7 | |
| Logic input high voltage (G, /G), printed as single value | VIH | 2 | V | VCC=5.0V; G, /G | 7 | ||
| Logic input low voltage (G, /G), printed as single value | VIL | 0.8 | V | VCC=5.0V; G, /G | 7 | ||
| High-level output voltage | VOH | 3.8 | 4.89 | V | VCC=5.0V; IOH = -6mA, VID = +200mV | 7 | |
| Low-level output voltage | VOL | 0.11 | 0.4 | V | VCC=5.0V; IOL= 6mA, VID = -200mV | 7 | |
| Differential input high-threshold voltage, positive; printed as single value | VIT+ | 0.2 | V | VCC=5.0V; VI = -7 V to 12 V | 7 | ||
| Differential input low-threshold voltage, negative; printed as single value | VIT- | -0.2 | V | VCC=5.0V; VI = -7 V to 12 V | 7 | ||
| Input resistance | Rin | 96 | 176 | kΩ | VCC=5.0V; VI = -7V to12V, one input to ground | 7 | |
| Line input current (VI=12V, other input at -7V to 12V) | II (A/B) | 48 | 150 | uA | VCC=5.0V; VI=12V,Other input at -7V to 12V | 7 | |
| Line input current (VI=-7V, other input at -7V to 12V) | II (A/B) | 61 | 150 | uA | VCC=5.0V; VI=-7V,Other input at -7V to 12V | 7 | |
| High level enable current | IH(G,/G) | 3.2 | 10 | uA | VCC=5.0V; VI=VCC | 7 | |
| Low level enable current | IL(G,/G) | -10 | -2.6 | uA | VCC=5.0V; VI=GND | 7 | |
| OFF state (high-impedance-state) output current | IOZ | -1 | 0 | 1 | uA | VCC=5.0V; Vo=0V or VCC | 7 |
| Short-circuit output current (5.0V) | IOS | -180 | -103 | mA | VCC=5.0V; VCC=MAX,Vo=0V,VID>=0.2V | 7 | |
| Quiescent supply current (5.0V) | ICC | 6.5 | 10 | mA | VCC=5.0V; G,/G=VCC or GND,100 ohm Line inputs resistor | 7 | |
| High-level output voltage (3.3V) | VOH | 2.7 | 3.47 | V | VCC=3.3V; IOH = -6mA, VID = +200mV | 8 | |
| Low-level output voltage (3.3V) | VOL | 0.16 | 0.4 | V | VCC=3.3V; IOL= 6mA, VID = -200mV | 8 | |
| Differential input high-threshold voltage, positive (3.3V, printed in mV) | VIT+ | 0.2 | mV | VCC=3.3V; VI = -7 V to 12 V | 8 | ||
| Differential input low-threshold voltage, negative (3.3V, printed in mV) | VIT- | -0.2 | mV | VCC=3.3V; VI = -7 V to 12 V | 8 | ||
| Input resistance (3.3V) | Rin | 96 | 176 | kΩ | VCC=3.3V; VI = -7V to12V, one input to ground | 8 | |
| Line input current (3.3V, VI=12V) | II (A/B) | 50 | 150 | uA | VCC=3.3V; VI=12V,Other input at -7V to 12V | 8 | |
| Line input current (3.3V, VI=-7V) | II (A/B) | 54 | 150 | uA | VCC=3.3V; VI=-7V,Other input at -7V to 12V | 8 | |
| High level enable current (3.3V) | IH(G,/G) | 2.1 | 5.5 | uA | VCC=3.3V; VI=VCC | 8 | |
| Low level enable current (3.3V) | IL(G,/G) | 2 | 5.5 | uA | VCC=3.3V; VI=GND | 8 | |
| Short-circuit output current (3.3V) | IOS | -85 | -58 | mA | VCC=3.3V; VCC=MAX,Vo=0V,VID>=0.2V | 8 | |
| Quiescent supply current (3.3V) | ICC | 6.2 | 8 | mA | VCC=3.3V; G,/G=VCC or GND,100 ohm Line inputs resistor | 8 | |
| Propagation delay time, low-to-high-level output (5.0V) | tPLH | 16 | 30 | ns | VCC=5.0V; SW is open, see Figure 1, CL=15pF | 7 | |
| Propagation delay time, high-to-low-level output (5.0V) | tPHL | 19 | 30 | ns | VCC=5.0V; SW is open, see Figure 1, CL=15pF | 7 | |
| Pulse skew time (5.0V) | tsk(p) | 3 | 7 | ns | VCC=5.0V; SW is open, see Figure 1 | 7 | |
| Differential output rise time (5.0V) | tr | 3.7 | 11 | ns | VCC=5.0V; SW is open, see Figure 1, CL=15pF | 7 | |
| Differential output fall time (5.0V) | tf | 2.2 | 11 | ns | VCC=5.0V; SW is open, see Figure 1, CL=15pF | 7 | |
| Output enable time to high level (5.0V) | tPZH | 10 | 40 | ns | VCC=5.0V; SW is closed, see Figure 3, CL=50pF | 7 | |
| Output enable time to low level (5.0V) | tPZL | 13 | 40 | ns | VCC=5.0V; SW is closed, see Figure 3, CL=50pF | 7 | |
| Output disable time from high level (5.0V) | tPHZ | 27 | 40 | ns | VCC=5.0V; SW is closed, see Figure 3, CL=50pF | 7 | |
| Output disable time from low level (5.0V) | tPLZ | 24 | 40 | ns | VCC=5.0V; SW is closed, see Figure 3, CL=50pF | 7 | |
| Propagation delay time, low-to-high-level output (3.3V) | tPLH | 22 | 30 | ns | VCC=3.3V; SW is open, see Figure 1, CL=15pF | 9 | |
| Propagation delay time, high-to-low-level output (3.3V) | tPHL | 22 | 30 | ns | VCC=3.3V; SW is open, see Figure 1, CL=15pF | 9 | |
| Pulse skew time (3.3V) | tsk(p) | 1.3 | 6 | ns | VCC=3.3V; SW is open, see Figure 1 | 9 | |
| Differential output rise time (3.3V) | tr | 3.3 | 11 | ns | VCC=3.3V; SW is open, see Figure 1, CL=15pF | 9 | |
| Differential output fall time (3.3V) | tf | 3.4 | 11 | ns | VCC=3.3V; SW is open, see Figure 1, CL=15pF | 9 | |
| Output enable time to high level (3.3V) | tPZH | 14 | 40 | ns | VCC=3.3V; SW is closed, see Figure 3, CL=50pF | 9 | |
| Thermal resistance, junction-to-ambient, 16-pin TSSOP | θJA | 118 | °C/W | JEDEC 1S0P PCB, reference only | 6 | ||
| Thermal resistance, junction-to-case, 16-pin TSSOP | θJC | 52 | °C/W | reference only, design simulation | 6 |
CAD (KiCad official)
- Symbol:
TPT4032-TS3R - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tpt4032-ts3r-etched.step/tpt4032-ts3r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpt4032-ts3r.step/tpt4032-ts3r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (18 pp, sha256
71817e57e07cd961, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).