Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPT4032-TS3R

3PEAK · RS-485 / RS-422 ICs · TSSOP-16

TPT4032-TS3R from 3PEAK, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input RS422/RS485 differential input (inverting) for receiver 1, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
2 1A input RS422/RS485 differential input (noninverting) for receiver 1, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
3 1R output Logic-level output of receiver 1, which is high-impedance when the enable inputs disable the receiver.
4 G input Active-high receiver enable input; logic high on G (with /G low) enables normal receiver operation, and VIH is 2.0 V minimum and VIL is 0.8 V maximum.
5 2R output Logic-level output of receiver 2, which is high-impedance when the enable inputs disable the receiver.
6 2A input RS422/RS485 differential input (noninverting) for receiver 2, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
7 2B input RS422/RS485 differential input (inverting) for receiver 2, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
8 GND power_in Ground reference pin for the device.
9 3B input RS422/RS485 differential input (inverting) for receiver 3, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
10 3A input RS422/RS485 differential input (noninverting) for receiver 3, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
11 3R output Logic-level output of receiver 3, which is high-impedance when the enable inputs disable the receiver.
12 /G input Active-low receiver enable input; logic low on /G (with G high) enables normal receiver operation, and VIH is 2.0 V minimum and VIL is 0.8 V maximum.
13 4R output Logic-level output of receiver 4, which is high-impedance when the enable inputs disable the receiver.
14 4A input RS422/RS485 differential input (noninverting) for receiver 4, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
15 4B input RS422/RS485 differential input (inverting) for receiver 4, operating within the -7 V to +12 V common-mode range with ±200 mV sensitivity.
16 VCC power_in Power supply pin; the datasheet specifies VCC from 3.0 V to 5.5V, with a 0.1 µF bypass capacitor placed close to this pin recommended.

Key specifications

Parameter Value
Manufacturer 3PEAK
Package TSSOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC -0.5 7 V 5
Input voltage (G, /G); max printed as VCC + 0.3 V VI -0.3 V 5
Common-mode input voltage (absolute maximum) VCM -10 15 V 5
Output voltage; max printed as VCC + 0.5 V VO -0.5 V 5
Input or output clamp current (±20 mA) IIK, IOK -20 20 mA 5
Output current (±20 mA) IO -20 20 mA 5
Short-circuit output current (absolute maximum), printed as single value IOS 200 mA 5
Operating virtual junction temperature (absolute maximum), printed as single value TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VCC 3 5.5 V 5
High-level input voltage (receiver enable inputs); max printed as VCC VIH 2 V 5
Low-level input voltage (receiver enable inputs) VIL 0 0.8 V 5
Common-mode input voltage VCM -7 12 V 5
Differential load resistance, printed as single value RL 100 Ω 5
Operating ambient temperature TA -40 125 °C 5
Enable-input clamp voltage (5.0V table); printed -0.8 -1.5 assigned min -1.5 / max -0.8 VIK -1.5 -0.8 V VCC=5.0V; IO = 18 mA 7
Logic input high voltage (G, /G), printed as single value VIH 2 V VCC=5.0V; G, /G 7
Logic input low voltage (G, /G), printed as single value VIL 0.8 V VCC=5.0V; G, /G 7
High-level output voltage VOH 3.8 4.89 V VCC=5.0V; IOH = -6mA, VID = +200mV 7
Low-level output voltage VOL 0.11 0.4 V VCC=5.0V; IOL= 6mA, VID = -200mV 7
Differential input high-threshold voltage, positive; printed as single value VIT+ 0.2 V VCC=5.0V; VI = -7 V to 12 V 7
Differential input low-threshold voltage, negative; printed as single value VIT- -0.2 V VCC=5.0V; VI = -7 V to 12 V 7
Input resistance Rin 96 176 kΩ VCC=5.0V; VI = -7V to12V, one input to ground 7
Line input current (VI=12V, other input at -7V to 12V) II (A/B) 48 150 uA VCC=5.0V; VI=12V,Other input at -7V to 12V 7
Line input current (VI=-7V, other input at -7V to 12V) II (A/B) 61 150 uA VCC=5.0V; VI=-7V,Other input at -7V to 12V 7
High level enable current IH(G,/G) 3.2 10 uA VCC=5.0V; VI=VCC 7
Low level enable current IL(G,/G) -10 -2.6 uA VCC=5.0V; VI=GND 7
OFF state (high-impedance-state) output current IOZ -1 0 1 uA VCC=5.0V; Vo=0V or VCC 7
Short-circuit output current (5.0V) IOS -180 -103 mA VCC=5.0V; VCC=MAX,Vo=0V,VID>=0.2V 7
Quiescent supply current (5.0V) ICC 6.5 10 mA VCC=5.0V; G,/G=VCC or GND,100 ohm Line inputs resistor 7
High-level output voltage (3.3V) VOH 2.7 3.47 V VCC=3.3V; IOH = -6mA, VID = +200mV 8
Low-level output voltage (3.3V) VOL 0.16 0.4 V VCC=3.3V; IOL= 6mA, VID = -200mV 8
Differential input high-threshold voltage, positive (3.3V, printed in mV) VIT+ 0.2 mV VCC=3.3V; VI = -7 V to 12 V 8
Differential input low-threshold voltage, negative (3.3V, printed in mV) VIT- -0.2 mV VCC=3.3V; VI = -7 V to 12 V 8
Input resistance (3.3V) Rin 96 176 kΩ VCC=3.3V; VI = -7V to12V, one input to ground 8
Line input current (3.3V, VI=12V) II (A/B) 50 150 uA VCC=3.3V; VI=12V,Other input at -7V to 12V 8
Line input current (3.3V, VI=-7V) II (A/B) 54 150 uA VCC=3.3V; VI=-7V,Other input at -7V to 12V 8
High level enable current (3.3V) IH(G,/G) 2.1 5.5 uA VCC=3.3V; VI=VCC 8
Low level enable current (3.3V) IL(G,/G) 2 5.5 uA VCC=3.3V; VI=GND 8
Short-circuit output current (3.3V) IOS -85 -58 mA VCC=3.3V; VCC=MAX,Vo=0V,VID>=0.2V 8
Quiescent supply current (3.3V) ICC 6.2 8 mA VCC=3.3V; G,/G=VCC or GND,100 ohm Line inputs resistor 8
Propagation delay time, low-to-high-level output (5.0V) tPLH 16 30 ns VCC=5.0V; SW is open, see Figure 1, CL=15pF 7
Propagation delay time, high-to-low-level output (5.0V) tPHL 19 30 ns VCC=5.0V; SW is open, see Figure 1, CL=15pF 7
Pulse skew time (5.0V) tsk(p) 3 7 ns VCC=5.0V; SW is open, see Figure 1 7
Differential output rise time (5.0V) tr 3.7 11 ns VCC=5.0V; SW is open, see Figure 1, CL=15pF 7
Differential output fall time (5.0V) tf 2.2 11 ns VCC=5.0V; SW is open, see Figure 1, CL=15pF 7
Output enable time to high level (5.0V) tPZH 10 40 ns VCC=5.0V; SW is closed, see Figure 3, CL=50pF 7
Output enable time to low level (5.0V) tPZL 13 40 ns VCC=5.0V; SW is closed, see Figure 3, CL=50pF 7
Output disable time from high level (5.0V) tPHZ 27 40 ns VCC=5.0V; SW is closed, see Figure 3, CL=50pF 7
Output disable time from low level (5.0V) tPLZ 24 40 ns VCC=5.0V; SW is closed, see Figure 3, CL=50pF 7
Propagation delay time, low-to-high-level output (3.3V) tPLH 22 30 ns VCC=3.3V; SW is open, see Figure 1, CL=15pF 9
Propagation delay time, high-to-low-level output (3.3V) tPHL 22 30 ns VCC=3.3V; SW is open, see Figure 1, CL=15pF 9
Pulse skew time (3.3V) tsk(p) 1.3 6 ns VCC=3.3V; SW is open, see Figure 1 9
Differential output rise time (3.3V) tr 3.3 11 ns VCC=3.3V; SW is open, see Figure 1, CL=15pF 9
Differential output fall time (3.3V) tf 3.4 11 ns VCC=3.3V; SW is open, see Figure 1, CL=15pF 9
Output enable time to high level (3.3V) tPZH 14 40 ns VCC=3.3V; SW is closed, see Figure 3, CL=50pF 9
Thermal resistance, junction-to-ambient, 16-pin TSSOP θJA 118 °C/W JEDEC 1S0P PCB, reference only 6
Thermal resistance, junction-to-case, 16-pin TSSOP θJC 52 °C/W reference only, design simulation 6

CAD (KiCad official)

  • Symbol: TPT4032-TS3R
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tpt4032-ts3r-etched.step / tpt4032-ts3r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpt4032-ts3r.step / tpt4032-ts3r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 3PEAK datasheet (18 pp, sha256 71817e57e07cd961, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF