Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
TPS92690PWPR
Texas Instruments · LED Drivers · HTSSOP-16-EP
TPS92690PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | nDIM | input | Dual-function input: a resistor divider from VIN sets the UVLO threshold and hysteresis, and a PWM dimming signal can be applied through a diode or MOSFET at the same time. |
| 2 | OVP | input | Connect a resistor divider from the output voltage to set the overvoltage protection threshold and hysteresis. |
| 3 | RT | output | Connect a resistor to AGND to set the base switching frequency. |
| 4 | SYNC | input | External PWM signal sets switching frequency and must be higher than the base frequency set at RT; a falling edge triggers a new on-time at GATE, and tying it to ground selects the internal oscillator. |
| 5 | SS/SD | input | Connect a capacitor to AGND to set the soft-start delay; pull the pin below 75 mV for low-power shutdown. |
| 6 | COMP | input | Connect a ceramic capacitor to GND to set loop compensation. |
| 7 | AGND | power_in | Analog ground; connect to PGND through the DAP exposed thermal pad for a proper ground return path. |
| 8 | ILIM | input | Connect a resistor divider from VREF to set the current limit threshold voltage at the IS pin. |
| 9 | VREF | power_in | Connect to the IADJ pin directly or through a resistor divider, and bypass with a 100-nF ceramic capacitor to AGND. |
| 10 | IADJ | input | Connect a resistor divider from VREF to set the error amplifier reference voltage. |
| 11 | CSP | input | Connect to the positive terminal of the sense resistor in series with the LED stack. |
| 12 | PGND | power_in | Power ground; connect to AGND through the exposed thermal pad for a proper ground return path. |
| 13 | GATE | output | Connect to the gate of the main N-channel MOSFET of the switching converter. |
| 14 | IS | input | Connect to the drain of the main N-channel MOSFET, or to its source if a sense resistor is used for improved accuracy. |
| 15 | VCC | power_in | Bypass with a 2.2-µF ceramic capacitor to provide the bias supply for the controller. |
| 16 | VIN | power_in | Connect to the converter input supply; bypass with a 100-nF ceramic capacitor to AGND as close to the device as possible. |
| 17 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS92690PWPR - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
tps92690pwpr-etched.step/tps92690pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92690pwpr.step/tps92690pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
4e9779f40762b2e5, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).